Zimmer GmbH
64 recalls on record · Latest: Sep 18, 2024
Zimmer GmbH Recall Insight
Zimmer GmbH appears on 64 federal recall records indexed by PlainRecalls, out of 83,949 total recalls tracked across the FDA, CPSC, NHTSA, and USDA FSIS. That represents approximately 0.076% of the federal archive — a data point that is only interpretable alongside production volume, product mix, and decades of operation, because a high recall count alone does not establish fault. Large, diversified firms that sell tens of millions of units across many categories will mechanically accumulate more recall records than small manufacturers, even when their defect rates per unit shipped are comparable or lower. The most recent action on this firm is dated Sep 18, 2024, which is the anchor point for assessing whether enforcement is currently active or historical.
On this page of 50 entries, severity tagging shows 0 critical, 50 moderate, and 0 lower-severity recalls. Affected-unit counts are disclosed on 50 of 50 entries — unit-count disclosure is more common on CPSC and NHTSA actions and less common on FDA drug/device recalls, where lot numbers and distribution scope substitute for absolute totals. The records on this page span 1 distinct product categories, with issuing agencies dominated by FDA Devices (50). The date window on this page runs from May 29, 2019 to Sep 18, 2024.
Manufacturer-level browsing is useful when monitoring a single firm for patterns — whether recalls cluster around one product family (suggesting a specific design or supplier issue) or scatter across the firm's entire catalog (which can indicate systemic quality-control problems or deliberate regulator attention). Clicking into each recall reveals the specific hazard, remedy, and distribution scope that together determine whether a consumer is actually at risk. For decisions that depend on being current — deciding whether a product in your home is safe, whether to return a gift, or whether to accept a replacement — always verify the recall number on the issuing agency's site, because federal agencies amend, terminate, and re-scope recalls over time and only the agency's live record reflects the current legal status. This page aggregates what agencies have published publicly and is intended for consumer awareness and research.
Biolox Option Taper Sleeve, Type 1 Taper, -6mm Neck - Indicated for use in total hip replacement with cemented or non-cemented femoral and acetabular…
Zimmer Natural Nail -ZNN Cephalomedullary Short Nail 11.5 mm X 21.5 cm 125 CCD Left Ti-6Al-4V Alloy- intended for temporary fracture fixation and sta…
Zimmer Natural Nail- ZNN Cephalomedullary Short Nail 11.5 mm X 21.5 cm 130 CCD Left Ti-6Al-4V Alloy-is intended for temporary fracture fixation and s…
V-TEK", IVP step drill 2.5-3.9x124mm, 16mm stop, contra-angle, Item Number 502015637
Drill, contra-angle, 1.5x85mm, Item Number ST502015706
Drill, cannulated, 3x90mm, AO, Item Number ST502015631
CBS micro, countersink, cannulated, round-shaft, Item Number 503004341
Drill, 15mm stop, 1x83mm, Stryker, Item Number 502015114
Drill, cannulated, 2.5x95mm, AO, Item Number 502015621
Drill for 3.5mm screw, 2.5x120mm, AO, Item Number ST502015216
Drill, cannulated, 2.8x150mm, AO, Item Number 502015629
V-TEK", IVP step drill 2.5-3.9x124mm, 16mm stop, AO, Item Number 502015638
Drill, cannulated, 3x90mm, round shaft, Item Number 502015630
CBS 4.0 countersink, cannulated, 15mm stop, AO, Item Number 503004352
Drill, cannulated, 2.8x120mm, AO, Item Number ST502015628
Drill, cannulated, 4x120mm, AO, Item Number ST502015402
Drill for 2.7mm screw, 2x120mm, AO, Item Number 502015212
Drill, 26mm stop, 1.4x94mm, Stryker, Item Number 502015120
CBS 7.5 tap, cannulated, AO, Item Number 503002041
Drill for 2.7mm screw, 23mm stop, 2x103mm, AO, Item Number ST502015207
Drill for 3.5mm screw, 2.5x120mm, AO, Item Number 502015216
Drill, 26mm stop, 1.4x94mm, stryker, Item Number 502015145
V-TEK", Micro-countersink, AO, Item Number 28.66.113
Drill, cannulated, 2x95mm, round shaft, Item Number 502015619
CBS high, countersink, cannulated, round-shaft, Item Number 503004342
Drill, cannulated, 2.8x120mm, AO, Item Number 502015628
Drill, 2.5x135mm, AO, Item Number 502015142
Drill, cannulated, 4x90mm, round shaft, Item Number ST502015640
CBS 4.5 countersink, cannulated, 18mm stop, round-shaft, Item Number 503004351
Drill, 3.2x145mm, AO, Item Number ST502015650
Drill, cannulated, 2x95mm, AO, Item Number 502015623
Drill, cannulated, 3.5x90mm, round shaft, Item Number ST502015635
Drill, cannulated, 2.5x95mm, AO, Item Number ST502015621
Drill, contra-angle, 1.5x85mm, Item Number 502015706
Drill, cannulated, 3x90mm, AO, Item Number 502015631
CBS micro, countersink, cannulated, AO, Item Number 503004541
Drill, cannulated, 3.5x90mm, round shaft, Item Number 502015635
V-TEK", micro-countersink, round shaft, Item Number 28.66.112
Drill, cannulated, 2x95mm, round shaft, Item Number ST502015619
Drill Sys2.7, 2x103mm, AO, Item Number 502015107
Osteofresh arthrodesis drill, 2x70mm, center tip, AO, 10mm stop, Item Number 502015213
Drill, cannulated, 4x90mm, round shaft, Item Number 502015640
Drill Sys 2.7, 2x105mm, stryker, Item Number 502015106
Drill, 2.5x94mm, Stryker, Item Number 502015136
V-TEK", standard-countersink, cannulated, AO, Item Number 28.66.111
Drill, 19mm stop, 1.9x87mm, AO, Item Number 502015131
Drill, 2.5x87mm, AO, Item Number 502015137
Drill, cannulated, 2x95mm, AO, Item Number ST502015623
Drill, 15mm stop, 1x76mm, AO , Item Number 502015115
Drill, cannulated, 4x150mm, AO, Item Number ST502015403
Nearby Manufacturers
Other firms with recall activity tracked in the PlainRecalls index.
Data Sources
Explore Related Data
Read our methodology — how this data is sourced, computed, and verified.