Zimmer, Inc.
446 recalls on record · Latest: Jul 1, 2026
Subscribe to new Zimmer, Inc. recalls (RSS)
Agency notice ledger
Federal filing book Zimmer, Inc. HEAVY-BOOK · SINGLE-AGENCY
#17 of 14,151 · 446 notices · 0.427% archive
- BOOK 446 notices
- RANK #17 of 14,151
- SHARE 0.427% archive
- AGENCY FDA Devices (446)
- CAT medical devices
- CATS 1 category
- LATEST Jul 1, 2026
- PHOTO B Braun Medical Inc
Nearest notice-volume peer: B Braun Medical Inc (2 notice gap)
Zimmer, Inc. accounts for about 0.427% of the 104,423-notice archive on 446 distinct filings — a heavy share signal beside absolute volume. FDA · CPSC · USDA FSIS · NHTSA notice stamps for this firm. Read with this firm → · Dominant category → · Similar-volume firm →
Zimmer, Inc.'s standing among 14,151 recalling firms
Zimmer, Inc. ranks 17th of 14,151 tracked firms by distinct recall-event count. Archive size reflects filing volume, not inherent product danger.
Zimmer, Inc. vs all firms by recall-notice count
Where this firm's archive sits among every tracked recalling manufacturer
446 17th of 14151 higher than 14,134 of 14,151 firms
Firms, banded by distinct federal recall-event inventory
Each bar is a band; taller bars hold more firms. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count and share, and where it sits relative to this entry.
Source FDA · CPSC · USDA FSIS · NHTSA federal recall filings · 2026-09-13
Zimmer, Inc. in the notice-volume neighbourhood
Distinct federal recall events among this firm and nearest nationwide peers
- Ge Healthcare…
Ge Healthcare LLC
475 notices
- Attix Pharmac…
Attix Pharmaceuticals
470 notices
- King Bio Inc.
King Bio Inc.
465 notices
- Zimmer, Inc. (this)
Zimmer, Inc.
446 notices
- B Braun Medic…
B Braun Medical Inc
444 notices
- Biomerieux Inc
Biomerieux Inc
422 notices
What this shows Zimmer, Inc. holds about 0.427% of archive notices alongside 446 distinct filings.
NCB¿-PH Plate
Metasul¿ Durom¿ Femoral component Sterile, Rx
Dynesys¿ Set screw M6
Dynesys¿ Universal spacer 6-45
NCB¿-PT lateral proximal 3 hole tibial plate
Dynesys¿ L.I.S. Stabilizing cord Rx, Sterile
Sirus¿ intramedullary nail for tibia, cannulated ¿
Alloclassic¿ SL-Offset Stem sterile, Rx
Wagner SL Revision Stem, uncemented Sterile
Wagner cone Prosthesis, uncemented, sterile, Rx
CoCr Head, sterile, Rx
MS-30¿ Proximal positioner
Anatomical Shoulder" Fracture Humeral Head
Metasul¿ LDH¿ Head Rx Sterile
Biolox¿ delta Ceramic Femoral Head Rx only, sterile
Anatomical Shoulder" Revision Humeral stem,7,9,12,14 and Anatomical Shoulder Fracture Humeral stem
MS-30 Shaft, Sterile, Rx
Zimmer Inverse/Reverse Screw system,
Anatomical Shoulder" Ball taper for humeral stem
CPT Femoral Stem 12/14 Neck Taper Extended Offset,(item 00-8114-001-10. CPT stems are primary cemented femoral hip stems used by surgeons in total hip arthroplasty.
CPT Modular Stem, Item No. 00-8011-001-00; Lot 61947708. CPT stems are primary cemented femoral hip stems used by surgeons in total hip arthroplasty.
CPT Hip System Femoral Stem Petite, Item No. 00-8011-000-05. CPT stems are primary cemented femoral hip stems used by surgeons in total hip arthroplasty.
00789502202 VerSys Femoral Head Provisional 22mm +0 00789502203 VerSys Femoral Head Provisional 22mm +3.5 00789502220 VerSys Femoral Head Provisional 22mm -2 00789502230 VerSys Femoral Head Provisional 22mm +3 12/14 Neck Taper The provisional heads replicate final femoral implant geometry and are used to trial range of motion, joint stability, and determine appropriate femoral head size and offset during total hip arthroplasty.
00780303601 MIS 12/14 Slotted Femoral Head Provisional -3.5X36 00780303602 MIS 12/14 Slotted Femoral Head Provisional +0X36 00780303603 MIS 12/14 Slotted Femoral Head Provisional +3.5X36 00780303604 MIS 12/14 Slotted Femoral Head Provisional +7X36 00780303605 MIS 12/14 Slotted Femoral Head Provisional +10.5X36 The provisional heads replicate final femoral implant geometry and are used to trial range of motion, joint stability, and determine appropriate femoral head size and offset during
Cemented Tibial Drill Product Usage: The cemented tibial drill is used to prepare the tibial bone prior to the impaction of the applicable stemmed tibial broach. The cemented tibial drill has engraved lines that are size specific to guide the user as to the depth to insert the drill into the tibial bone.
00780303201 MIS 12/14 Slotted Femoral Head Provisional -3.5X32 00780303202 MIS 12/14 Slotted Femoral Head Provisional +0X32 00780303203 MIS 12/14 Slotted Femoral Head Provisional +3.5X32 00780303204 MIS 12/14 Slotted Femoral Head Provisional +7X32 00780303205 MIS 12/14 Slotted Femoral Head Provisional +10.5X32 00780303214 MIS 12/14 Slotted Femoral Head Provisional +7X32 The provisional heads replicate final femoral implant geometry and are used to trial range of motion, joint stability,
00780302801 MIS 12/14 Slotted Femoral Head Provisional -3.5X28 00780302802 MIS 12/14 Slotted Femoral Head Provisional +0X28 00780302803 MIS 12/14 Slotted Femoral Head Provisional +3.5X28 00780302804 MIS 12/14 Slotted Femoral Head Provisional +7X28 00780302805 MIS 12/14 Slotted Femoral Head Provisional +10.5X28 00780302814 MIS 12/14 Slotted Femoral Head Provisional +7X28 The provisional heads replicate final femoral implant geometry and are used to trial range of motion, joint stability,
00780302201 MIS 12/14 Slotted Femoral Head Provisional -2X22 00780302202 MIS 12/14 Slotted Femoral Head Provisional +0X22 00780302203 MIS 12/14 Slotted Femoral Head Provisional +3.5X22 The provisional heads replicate final femoral implant geometry and are used to trial range of motion, joint stability, and determine appropriate femoral head size and offset during total hip arthroplasty.
00789502601 VerSys Femoral Head Provisional 26mm -3.5 00789502602 VerSys Femoral Head Provisional 26mm +0 00789502603 VerSys Femoral Head Provisional 26mm +3.5 00789502604 VerSys Femoral Head Provisional 26mm +7 00789502605 VerSys Femoral Head Provisional 26mm +10.5 12/14 Neck Taper The provisional heads replicate final femoral implant geometry y and are used to trial range of motion, joint stability, and determine appropriate femoral head size and offset during total hip arthroplasty.
12/14 Neck Taper 00789504001 VerSys Femoral Head Provisional 40mm -3.5 00789504002 VerSys Femoral Head Provisional 40mm +0 00789504003 VerSys Femoral Head Provisional 40mm +3.5 00789504004 VerSys Femoral Head Provisional 40mm +7 00789504005 VerSys Femoral Head Provisional 40mm +10.5 The provisional heads replicate final femoral implant geometry and are used to trial range of motion, joint stability, and determine appropriate femoral head size and offset during total hip arthroplasty.
00780304001 MIS 12/14 Slotted Femoral Head Provisional -3.5X36 00780304002 MIS 12/14 Slotted Femoral Head Provisional +0X36 00780304003 MIS 12/14 Slotted Femoral Head Provisional +3.5X36 00780304004 MIS 12/14 Slotted Femoral Head Provisional +7X36 00780304005 MIS 12/14 Slotted Femoral Head Provisional +10.5X36 The provisional heads replicate final femoral implant geometry and are used to trial range of motion, joint stability, and determine appropriate femoral head size and offset during
00789502801 VerSys Femoral Head Provisional 28mm -3.5 00789502802 VerSys Femoral Head Provisional 28mm +0 00789502803 VerSys Femoral Head Provisional 28mm +3.5 00789502804 VerSys Femoral Head Provisional 28mm +7 00789502805 VerSys Femoral Head Provisional 28mm +10.5 12/14 Neck Taper The provisional heads replicate final femoral implant geometry and are used to trial range of motion, joint stability, and determine appropriate femoral head size and offset during total hip arthroplasty.
00780302601 MIS 12/14 Slotted Femoral Head Provisional -3.5X26 00780302602 MIS 12/14 Slotted Femoral Head Provisional +0X26 00780302603 MIS 12/14 Slotted Femoral Head Provisional +3.5X26 00780302604 MIS 12/14 Slotted Femoral Head Provisional +7X26 00780302605 MIS 12/14 Slotted Femoral Head Provisional +10.5X26 The provisional heads replicate final femoral implant geometry and are used to trial range of motion, joint stability, and determine appropriate femoral head size and offset during
12/14 Neck Taper 00789503201 VerSys Femoral Head Provisional 32mm -3.5 00789503202 VerSys Femoral Head Provisional 32mm +0 00789503203 VerSys Femoral Head Provisional 32mm +3.5 00789503204 VerSys Femoral Head Provisional 32mm +7 00789503205 VerSys Femoral Head Provisional 32mm +10.5 The provisional heads replicate final femoral implant geometry and are used to trial range of motion, joint stability, and determine appropriate femoral head size and offset during total hip arthroplasty.
00789503601 VerSys Femoral Head Provisional 36mm -3.5 00789503602 VerSys Femoral Head Provisional 36mm +0 00789503603 VerSys Femoral Head Provisional 36mm +3.5 00789503604 VerSys Femoral Head Provisional 36mm +7 00789503605 VerSys Femoral Head Provisional 36mm +10.5 12/14 Neck Taper The provisional heads replicate final femoral implant geometry and are used to trial range of motion, joint stability, and determine appropriate femoral head size and offset during total hip arthroplasty.
00-4309-029-01 - Trabecular Metal Reverse Shoulder Liner 36 mm 65¿¿ Neck Angle Per surgical technique 97-4309-003-00 Revision 4: "Complete Poly Liner insertion by snapping the appropriate 60¿ (Standard) or 65¿ (Retentive) Poly Liner Impactor to the Poly Liner Impactor Handle. Then, place the Poly Liner Impactor on the Poly Liner articular surface and forcefully strike the Poly Liner Handle with a mallet."
Trabecular Metal Reverse Shoulder Liner 40mm, part 00-4309-028-00 - Per surgical technique 97-4309-003-00 Revision 4: "Complete Poly Liner insertion by snapping the appropriate 60¿ (Standard) or 65¿ (Retentive) Poly Liner Impactor to the Poly Liner Impactor Handle. Then, place the Poly Liner Impactor on the Poly Liner articular surface and forcefully strike the Poly Liner Handle with a mallet."
The NCB Polyaxial Locking Plate System NCB screws 26mm: 02.03155.026, non-sterile Product is implantable screws indicated for temporary internal fixation and stabilization of fractures and osteotomies of long bones. These screws are intended for bicortical anchorage.
00-4309-029-00- Trabecular Metal Reverse Shoulder Liner 36mm, Nonsterile Per surgical technique 97-4309-003-00 Revision 4: "Complete Poly Liner insertion by snapping the appropriate 60¿ (Standard) or 65¿ (Retentive) Poly Liner Impactor to the Poly Liner Impactor Handle. Then, place the Poly Liner Impactor on the Poly Liner articular surface and forcefully strike the Poly Liner Handle with a mallet."
00-4309-028-01 - Trabecular Metal Reverse Shoulder Liner 40mm 65¿ Neck Angle Per surgical technique 97-4309-003-00 Revision 4: "Complete Poly Liner insertion by snapping the appropriate 60¿ (Standard) or 65¿ (Retentive) Poly Liner Impactor to the Poly Liner Impactor Handle. Then, place the Poly Liner Impactor on the Poly Liner articular surface and forcefully strike the Poly Liner Handle with a mallet."
Nextgen Complete Knee Solution Femoral and Provisional Impactor/ Extractor, REF 00-5901-026-00, Non-Sterile Zimmer, Warsaw Indiana The instrument is attached to the femoral implant or provisional to aid in positioning and inserting the components.
Nextgen Complete Knee Solution Replacement Jaw for Use with Femoral and Provisional Impactor/Extractor, REF 00-5901-026-40, Non-Sterile Zimmer, Warsaw Indiana The instrument is attached to the femoral implant or provisional to aid in positioning and inserting the components.
Pathfinder NXT Fixed Percutaneous Rod Holder, Part numbers 3573-2 (straight handle) Stainless Steel / Silicone Rubber, Rx only, non sterile. Product Usage: PathFinder NXT is a minimally invasive pedicle screw system. The PathFinder NXT System consists of various screws and rods intended to provide temporary stabilization following surgery to fuse the spine. The intended use of the Fixed Angled Percutaneous Rod Inserter is to insert a rod percutaneously through the extender sieeves to positio
Pathfinder NXT Fixed Percutaneous Rod Holder, Part numbers 3573-1 (angle handle) , Stainless Steel / Silicone Rubber, Rx only, non sterile. Product Usage: The rod is held by the instrument for inserting and guiding into the screw heads via percutaneous delivery during minimally invasive surgery to fuse the spine. Per the surgical technique (Ll554 Pathfinder NXT Surgical Technique);
PathFinder NXT Pivoting Percutaneous Rod Holder This device is an instrument used during orthopedic surgery. The intended use of the pivoting percutaneous rod holder is to attach to the rod to facilitate rod insertion, positioning, and orientation through the extender sleeves, under the fascia. The rod is secured to the holder by tightening a captive set screw against the rod end in the tip of the holder using the set screw driver. After positioning the rod and securing at least one pedicle s
Bigliani/Flatow The Complete Shoulder Solution Trabecular Metal Glenoid Instrument Drill with Stop, 6 mm; the products are medical instruments intended for use when performing surgery of the shoulder.
Zimmer, Inc. carries an outsized archive share
Drug and device firms outside this manufacturer and state, matched by notice volume and category footprint.
Similar recall count
Nearest multi-notice firms by distinct-event totals (446 here — heavy-book).
Similar medical devices volume
Nearest multi-notice firms in the same narrow category lane.
Frequently Asked Questions
How many federal recall notices name Zimmer, Inc.? ▼
Where does Zimmer, Inc. sit among other recalling firms? ▼
Which agency issues most of Zimmer, Inc.'s notices? ▼
What product category dominates Zimmer, Inc.'s filing book? ▼
Is a higher notice count more dangerous? ▼
Firm-level totals aggregate distinct federal recall events naming Zimmer, Inc.; individual notices remain authoritative on each linked recall page.
Methodology · Corrections · FDA · CPSC · USDA FSIS · NHTSA · Archive as of September 2026