PlainRecalls
ModerateActive

CPSC recall · Reported February 29, 2000

CPSC, Dynacraft Industries Inc. Announce Recall of Mountain Bikes

The front suspension forks on these bikes might not have been welded properly, and can break apart during use, resulting in serious injury to the rider.

Recall #
00072a
Affected scope
About 19,000
Compiled from official public sources by the editorial team.
Verify with CPSC →
View my saved recalls

The CPSC recalled The recall involves "Vertical XL2" mountain bikes with chrome-colored frames. The model n… - a moderate-severity action.

CPSC, Dynacraft Industries Inc. Announce Recall of Mountain Bikes was recalled and listed by the CPSC in February 29, 2000. Reason: The front suspension forks on these bikes might not have been welded properly, and can break apart during use…. Remedy: Stop riding these bikes immediately and take them to the Target store where purchased, fo…. Verify recall #00072a with the CPSC before acting.

The recall

issued this moderate-severity CPSC recall-The front suspension forks on these bikes might not have been welded properly, and can break apart during use….

Moderate
severity level
February 29, 2000
reported

Sourced from official CPSC enforcement records. Verify recall #00072a with the agency before acting. Full product description, hazard, remedy, and related recalls are below.

Recall Insight

This CPSC action (record #00072a) was formally reported on February 29, 2000. It is classified under Moderate severity, with a current status of Active. The recalling firm is not specified in the federal record. Federal records list the affected scope as About 19,000.

The documented reason for this recall is: The front suspension forks on these bikes might not have been welded properly, and can break apart during use, resulting in serious injury to the rider. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Stop riding these bikes immediately and take them to the Target store where purchased, for a choice of a free replacement fork or a free replacement bike. - consumers holding this product should act on that instruction rather than relying on general guidance.

Within the same product category the archive holds 6 closely related recalls, 6 from CPSC - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.

Outdoor & Sports recalls over time

Where this recall sits in its category - 510 outdoor & sports recalls on record

101520253035 20052008201120142017202020232026 27
Severity2487872426High severity (most serious)Moderate severityLow severity
Where this recall sits in the database

Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.

Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.

Severity

Moderate

Affected scope

About 19,000

Related Recalls

6

6 from same agency

Product description

The recall involves "Vertical XL2" mountain bikes with chrome-colored frames. The model name is written on the bike frame in yellow and black lettering. A label affixed to the frame near the crank reads "Model No. 8526-26" and "99.10.11," which shows they were manufactured the week of October 11, 1999. Only bikes with this date code are part of this recall. Another nearby label reads "Dynacraft Industries," and "Made in China."

Reason for recall

The front suspension forks on these bikes might not have been welded properly, and can break apart during use, resulting in serious injury to the rider.

Remedy, what to do

Stop riding these bikes immediately and take them to the Target store where purchased, for a choice of a free replacement fork or a free replacement bike.

Recall Profile

Structured summary of the CPSC recall record
Attribute Value
Agency U.S. Consumer Product Safety Commission
Severity class Moderate
Status Active
Recall number 00072a
Date reported February 29, 2000
Date initiated February 29, 2000
Recalling firm Not disclosed
Affected scope About 19,000
Distribution Not disclosed
Official source CPSC notice →

Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.

What to do with this recall

Stop riding these bikes immediately and take them to the Target store where purchased, for a choice of a free replacement fork or…

  • Check the recall number (00072a) and product description against the item you own. Search the archive
  • Confirm the current status and remedy on the official CPSC notice before acting. CPSC notice
  • Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next

This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.

Frequently Asked Questions

What product was recalled?
The recall involves "Vertical XL2" mountain bikes with chrome-colored frames. The model name is written on the bike frame in yellow and black lettering. A label affixed to the frame near the crank reads "Model No. 8526-26" and "99.10.11," which shows they were manufactured the week of October 11, 1999. Only bikes with this date code are part of this recall. Another nearby label reads "Dynacraft Industries," and "Made in China.". Units affected: About 19,000.
Why was this product recalled?
The front suspension forks on these bikes might not have been welded properly, and can break apart during use, resulting in serious injury to the rider.
What should consumers do?
Stop riding these bikes immediately and take them to the Target store where purchased, for a choice of a free replacement fork or a free replacement bike.
Which agency issued this recall?
This recall was issued by the CPSC on February 29, 2000. Severity: Moderate. Recall number: 00072a.
How do I check if my product is affected by a recall?
Check the product description and recall number (00072a) against your product. Visit the official CPSC website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product?
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.

Nearby Recalls in This Category

Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.

Compare this recall with Topyond Pool Drain Ports with Covers Recalled Due to Risk o… →

Browse all Outdoor & Sports recalls →

Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: CPSC, reported February 29, 2000. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.