PlainRecalls
No agency classActive

CPSC recall · Reported July 24, 2000

CPSC, Master Lock Co. Announce Recall to Replace Gun Locks

Due to a manufacturing discrepancy, the two halves of some gun locks can be manually separated without a key, giving children and others unauthorized access to a firearm.

Recall #
00149
Affected scope
About 752,000
Verify with CPSC →
View my saved recalls

Master Lock Co., of Milwaukee, Wis. recalled The locks being recalled are keyed, trigger gun locks sold separately or in combination w….

CPSC, Master Lock Co. Announce Recall to Replace Gun Locks was recalled by Master Lock Co., of Milwaukee, Wis. in July 24, 2000. Reason: Due to a manufacturing discrepancy, the two halves of some gun locks can be manually separated without a key,…. Remedy: Consumers should stop using the recalled locks immediately and call Master Lock to receiv…. Verify recall #00149 with the CPSC before acting.

The recall

Master Lock Co., of Milwaukee, Wis. issued this CPSC recall-Due to a manufacturing discrepancy, the two halves of some gun locks can be manually separated without a key,….

None
agency class
July 24, 2000
reported

Sourced from official CPSC enforcement records. Verify recall #00149 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.

Recall Insight

This CPSC action (record #00149) was formally reported on July 24, 2000. The CPSC does not publish a hazard classification for its recalls, so this record carries no agency severity grade, with a current status of Active. Master Lock Co., of Milwaukee, Wis. is listed as the recalling firm. Federal records list the affected scope as About 752,000.

The documented reason for this recall is: Due to a manufacturing discrepancy, the two halves of some gun locks can be manually separated without a key, giving children and others unauthorized access to a firearm. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Consumers should stop using the recalled locks immediately and call Master Lock to receive a free replacement lock. As always, consumers are reminded not to use gun locks on loaded guns. Until the re… - consumers holding this product should act on that instruction rather than relying on general guidance.

Within the same product category the archive holds 6 closely related recalls, 6 from CPSC - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.

Electronics recalls over time

Where this recall sits in its category - 618 electronics recalls on record

1020304050 20052008201120142017202020232026 45

Product description

The locks being recalled are keyed, trigger gun locks sold separately or in combination with certain Smith & Wesson and Walther handguns. The recalled gun locks were available for sale after June 20, 1999, and are either black or blue metal. Each half of the lock surrounds the trigger with a 1-inch locking post connecting them. The words, "Master Lock Tough Under Fire" are imprinted on the lock's black rubber pad. Affixed to the lock is a yellow sticker which reads, "Warning! Do Not Use On A Loaded Gun!" Master Lock brand gun locks sold separately were packaged with a green and black cardboard display card and with instruction sheets inside the package. Smith & Wesson gun locks were sold under its own name, and were packaged with blue display cards and instruction sheets inside the package. Model numbers found on the instruction sheets or packaging are 90, 90DSPT, 90KADSPT, 90TSPT, 90DS&W, 90KADS&W or 90TS&W. The words, "Made to exclusive Master Lock specifications in China" are on the back of the packaging. No other Master Lock gun locks are being recalled. Specifically, Master Lock trigger gun locks which were sold before June 20, 1999, (features to look for include: locks which were not sold with a yellow warning sticker or which state either "Milwaukee, Wis. U.S.A." on the rubber pad or "Made in U.S.A." on the packaging or the instruction sheets) or which have a locking post which measures over 1 1/4 inches in length are not included in this recall. Similarly, Master Lock cable gun locks or gun locks which lock with a combination rather than a key are not subject to this recall.

Reason for recall

Due to a manufacturing discrepancy, the two halves of some gun locks can be manually separated without a key, giving children and others unauthorized access to a firearm.

Remedy, what to do

Consumers should stop using the recalled locks immediately and call Master Lock to receive a free replacement lock. As always, consumers are reminded not to use gun locks on loaded guns. Until the replacement lock is received, consumers should not use the recalled gun locks. Master Lock urges consumers to comply with all state and local laws requiring the use of gun locking devices.

Recall Profile

Structured summary of the CPSC recall record
Attribute Value
Agency U.S. Consumer Product Safety Commission
Severity class Not classified by agency
Status Active
Recall number 00149
Date reported July 24, 2000
Date initiated July 24, 2000
Recalling firm Master Lock Co., of Milwaukee, Wis.
Affected scope About 752,000
Distribution Not disclosed
Official source CPSC notice →

Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.

What to do with this recall

Consumers should stop using the recalled locks immediately and call Master Lock to receive a free replacement lock. As always, co…

  • Check the recall number (00149) and product description against the item you own. Search the archive
  • Confirm the current status and remedy on the official CPSC notice before acting. CPSC notice
  • Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next

This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.

Frequently Asked Questions

What product was recalled?
The locks being recalled are keyed, trigger gun locks sold separately or in combination with certain Smith & Wesson and Walther handguns. The recalled gun locks were available for sale after June 20, 1999, and are either black or blue metal. Each half of the lock surrounds the trigger with a 1-inch locking post connecting them. The words, "Master Lock Tough Under Fire" are imprinted on the lock's black rubber pad. Affixed to the lock is a yellow sticker which reads, "Warning! Do Not Use On A Loaded Gun!" Master Lock brand gun locks sold separately were packaged with a green and black cardboard display card and with instruction sheets inside the package. Smith & Wesson gun locks were sold under its own name, and were packaged with blue display cards and instruction sheets inside the package. Model numbers found on the instruction sheets or packaging are 90, 90DSPT, 90KADSPT, 90TSPT, 90DS&W, 90KADS&W or 90TS&W. The words, "Made to exclusive Master Lock specifications in China" are on the back of the packaging. No other Master Lock gun locks are being recalled. Specifically, Master Lock trigger gun locks which were sold before June 20, 1999, (features to look for include: locks which were not sold with a yellow warning sticker or which state either "Milwaukee, Wis. U.S.A." on the rubber pad or "Made in U.S.A." on the packaging or the instruction sheets) or which have a locking post which measures over 1 1/4 inches in length are not included in this recall. Similarly, Master Lock cable gun locks or gun locks which lock with a combination rather than a key are not subject to this recall.. Recalled by Master Lock Co., of Milwaukee, Wis.. Units affected: About 752,000.
Why was this product recalled?
Due to a manufacturing discrepancy, the two halves of some gun locks can be manually separated without a key, giving children and others unauthorized access to a firearm.
What should consumers do?
Consumers should stop using the recalled locks immediately and call Master Lock to receive a free replacement lock. As always, consumers are reminded not to use gun locks on loaded guns. Until the replacement lock is received, consumers should not use the recalled gun locks. Master Lock urges consumers to comply with all state and local laws requiring the use of gun locking devices.
Which agency issued this recall?
This recall was issued by the CPSC on July 24, 2000. CPSC does not publish a hazard classification for this recall. Recall number: 00149.
How do I report an injury from a recalled product?
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.

Nationwide recalls with similar severity or category timing

Consumer-product notices outside this firm and state, matched by severity timing and product category.

Compare this recall with KC Imports and Exports Recalls Mini Laser Pointer Keychains… → · All Electronics recalls

This recall: CPSC, reported July 24, 2000. Severity classes follow each agency's own taxonomy; related-recall context is computed across the full archive.

Methodology · Corrections · Archive as of August 2026