CPSC, DEWALT® Industrial Tool Co. Announce Recall to Repair 12-inch Miter Saws

Bolts on the saws can loosen and the blade could detach, posing a risk of lacerations to consumers.

Recall #: 01073
Affected scope: About 112,000

Compiled from official public sources by the publisher. · Updated September 2026

Dewalt® Industrial Tool Co., of Baltimore, Md. recalled The recall involves only 12-inch DEWALT miter saws with model numbers DW704 TY1 and DW705….

CPSC, DEWALT® Industrial Tool Co. Announce Recall to Repair 12-inch Miter Saws was recalled by Dewalt® Industrial Tool Co., of Baltimore, Md. in January 25, 2001. Reason: Bolts on the saws can loosen and the blade could detach, posing a risk of lacerations to consumers.. Remedy: Consumers should stop using these saws immediately, and call DEWALT to receive a free rep…. Verify recall #01073 with the CPSC before acting.

The recall

Dewalt® Industrial Tool Co., of Baltimore, Md. issued this CPSC recall-Bolts on the saws can loosen and the blade could detach, posing a risk of lacerations to consumers..

None
agency class: January 25, 2001
reported

Sourced from official CPSC enforcement records. Verify recall #01073 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.

Recall Insight

This recall's affected scope, documented in the Recall Profile below, stays within a single-region or limited-distribution footprint. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. Consumers holding this product should act on the agency's documented remedy above rather than relying on general guidance.

Within the same product category the archive holds 6 closely related recalls, 6 from CPSC - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.

Product description

The recall involves only 12-inch DEWALT miter saws with model numbers DW704 TY1 and DW705 TY1. The model numbers are located on the nameplate on the top of the saw's housing. The saws are yellow with black accents. The recalled miter saws have date codes from 9201 through 9340. The date code is stamped into the end cap or back of the saws. No other DeWALT miter saws are involved in this recall.

Reason for recall

Bolts on the saws can loosen and the blade could detach, posing a risk of lacerations to consumers.

Remedy, what to do

Consumers should stop using these saws immediately, and call DEWALT to receive a free replacement bolt to repair the saw.

Recall Profile

Structured summary of the CPSC recall record
Attribute	Value
Agency	U.S. Consumer Product Safety Commission
Severity class	Not classified by agency
Status	Active
Recall number	01073
Date reported	January 25, 2001
Date initiated	January 25, 2001
Recalling firm	Dewalt® Industrial Tool Co., of Baltimore, Md.
Affected scope	About 112,000
Distribution	Not disclosed
Official source	CPSC notice →

Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.

What to do with this recall

Consumers should stop using these saws immediately, and call DEWALT to receive a free replacement bolt to repair the saw.

Check the recall number (01073) and product description against the item you own. Search the archive
Confirm the current status and remedy on the official CPSC notice before acting. CPSC notice
Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next

This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.

Frequently Asked Questions

What product was recalled? ▼

Why was this product recalled? ▼

Bolts on the saws can loosen and the blade could detach, posing a risk of lacerations to consumers.

What should consumers do? ▼

Consumers should stop using these saws immediately, and call DEWALT to receive a free replacement bolt to repair the saw.

Which agency issued this recall? ▼

This recall was issued by the CPSC on January 25, 2001. CPSC does not publish a hazard classification for this recall. Recall number: 01073.

How do I report an injury from a recalled product? ▼

Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.

Nationwide recalls with similar severity or category timing

Consumer-product notices outside this firm and state, matched by severity timing and product category.

Similar severity · nearest report date

Same archive severity grade, closest by report date among other firms and states.

CPSC, Black and Decker Inc. Announce Reca… 2001-01-25 DAEWOO 2000-2001: ELECTRICAL SYSTEM:WIRING 2001-01-25 CPSC, Trane Company Announce Recall of Vo… 2001-01-24 Tree Wound and Grafting Compound Recalled… 2001-01-23

Similar Household Products · nearest report date

Same product category, closest by report date among other firms and states (deduped against the severity set).

Rope Lights Recalled by CO2UCH 2001-01-23 Lamps Recalled by Environmental Lighting … 2001-01-23 CPSC, Carrier (Puerto Rico) Inc. Announce… 2001-02-01 CPSC, Alene Candles Announce Recall of Ch… 2001-02-05

Compare this recall with CCM Hockey U.S. Recalls FMHVR Hybrid Visors and ACCHVR Repl… → · All Household Products recalls

This recall: CPSC, reported January 25, 2001. Severity classes follow each agency's own taxonomy; related-recall context is computed across the full archive.

Methodology · Corrections · Archive as of August 2026