PlainRecalls
ModerateActive

CPSC recall · Reported March 27, 2003

CPSC, Hitachi Koki U.S.A., Ltd. Announce Recall to Repair Circular Saws

The lower blade guards on these saws can stick in the open position, exposing the blade and posing a serious laceration hazard.

Recall #
03101
Affected scope
About 14,300
Compiled from official public sources by the editorial team.
Verify with CPSC →
View my saved recalls

Hitachi Koki U.S.A., Ltd., of Norcross, Ga. recalled The recall involves 7 1/4-inch circular saws with model numbers C7SB2 or C7BD2 and serial… - a moderate-severity action.

CPSC, Hitachi Koki U.S.A., Ltd. Announce Recall to Repair Circular Saws was recalled by Hitachi Koki U.S.A., Ltd., of Norcross, Ga. in March 27, 2003. Reason: The lower blade guards on these saws can stick in the open position, exposing the blade and posing a serious …. Remedy: Consumers should stop using these circular saws immediately and return them to Hitachi fo…. Verify recall #03101 with the CPSC before acting.

The recall

Hitachi Koki U.S.A., Ltd., of Norcross, Ga. issued this moderate-severity CPSC recall-The lower blade guards on these saws can stick in the open position, exposing the blade and posing a serious ….

Moderate
severity level
March 27, 2003
reported

Sourced from official CPSC enforcement records. Verify recall #03101 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.

Recall Insight

This CPSC action (record #03101) was formally reported on March 27, 2003. It is classified under Moderate severity, with a current status of Active. Hitachi Koki U.S.A., Ltd., of Norcross, Ga. is listed as the recalling firm. Federal records list the affected scope as About 14,300.

The documented reason for this recall is: The lower blade guards on these saws can stick in the open position, exposing the blade and posing a serious laceration hazard. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Consumers should stop using these circular saws immediately and return them to Hitachi for a free repair. - consumers holding this product should act on that instruction rather than relying on general guidance.

Within the same product category the archive holds 6 closely related recalls, 6 from CPSC - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.

Household Products recalls over time

Where this recall sits in its category - 3,056 household products recalls on record

50100150200250 20052008201120142017202020232026 115
Severity2487872426High severity (most serious)Moderate severityLow severity
Where this recall sits in the database

Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.

Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.

Severity

Moderate

Affected scope

About 14,300

Related Recalls

6

6 from same agency

Product description

The recall involves 7 1/4-inch circular saws with model numbers C7SB2 or C7BD2 and serial numbers that begin with C62, C72, C82, C92, C02 or CN2. The model number is located on the green nameplate on the motor housing below the name "Hitachi." The serial number is stamped at the lower right of the nameplate. The saw's housing is green and the name "Hitachi" also is written on the metal blade guard.

Reason for recall

The lower blade guards on these saws can stick in the open position, exposing the blade and posing a serious laceration hazard.

Remedy, what to do

Consumers should stop using these circular saws immediately and return them to Hitachi for a free repair.

Recall Profile

Structured summary of the CPSC recall record
Attribute Value
Agency U.S. Consumer Product Safety Commission
Severity class Moderate
Status Active
Recall number 03101
Date reported March 27, 2003
Date initiated March 27, 2003
Recalling firm Hitachi Koki U.S.A., Ltd., of Norcross, Ga.
Affected scope About 14,300
Distribution Not disclosed
Official source CPSC notice →

Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.

What to do with this recall

Consumers should stop using these circular saws immediately and return them to Hitachi for a free repair.

  • Check the recall number (03101) and product description against the item you own. Search the archive
  • Confirm the current status and remedy on the official CPSC notice before acting. CPSC notice
  • Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next

This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.

Frequently Asked Questions

What product was recalled?
The recall involves 7 1/4-inch circular saws with model numbers C7SB2 or C7BD2 and serial numbers that begin with C62, C72, C82, C92, C02 or CN2. The model number is located on the green nameplate on the motor housing below the name "Hitachi." The serial number is stamped at the lower right of the nameplate. The saw's housing is green and the name "Hitachi" also is written on the metal blade guard.. Recalled by Hitachi Koki U.S.A., Ltd., of Norcross, Ga.. Units affected: About 14,300.
Why was this product recalled?
The lower blade guards on these saws can stick in the open position, exposing the blade and posing a serious laceration hazard.
What should consumers do?
Consumers should stop using these circular saws immediately and return them to Hitachi for a free repair.
Which agency issued this recall?
This recall was issued by the CPSC on March 27, 2003. Severity: Moderate. Recall number: 03101.
How do I check if my product is affected by a recall?
Check the product description and recall number (03101) against your product. Visit the official CPSC website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product?
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.

Nearby Recalls in This Category

Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.

Compare this recall with Cooper Lighting Recalls Metalux Optimized High Bay LED Ligh… →

Browse all Household Products recalls →

Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: CPSC, reported March 27, 2003. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.