Severity
Critical
NHTSA recall · Reported September 26, 2003
ON SOME MOTORCYCLES, CERTAIN FRAME WELDS DO NOT MEET MANUFACTURING SPECIFICATIONS. HIGH LOADS CREATED WHEN RIDING ON ROUGH ROAD SURFACES OR THROUGH POTHOLES CAN CAUSE THE AFFECTE…
Honda recalled ON SOME MOTORCYCLES, CERTAIN FRAME WELDS DO NOT MEET MANUFACTURING SPECIFICATIONS. HIGH … - a critical-severity action.
HONDA 2002-2003: STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS was recalled by Honda in September 26, 2003. Reason: ON SOME MOTORCYCLES, CERTAIN FRAME WELDS DO NOT MEET MANUFACTURING SPECIFICATIONS. HIGH LOADS CREATED WHEN R…. Remedy: DEALERS WILL INSPECT AND REINFORCE THE WELDS ON ALL FRAMES. OWNER NOTIFICATION BEGAN DU…. Verify recall #03V350000 with the NHTSA before acting.
The recall
Honda issued this critical-severity NHTSA recall-ON SOME MOTORCYCLES, CERTAIN FRAME WELDS DO NOT MEET MANUFACTURING SPECIFICATIONS. HIGH LOADS CREATED WHEN R….
Sourced from official NHTSA enforcement records. Verify recall #03V350000 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.
This NHTSA action (record #03V350000) was formally reported on September 26, 2003. It is classified under Critical severity, with a current status of Active. Honda is listed as the recalling firm. The number of affected units is not disclosed in the agency filing, which is common for drug and food recalls where lot-level tracking supersedes unit counts.
The documented reason for this recall is: ON SOME MOTORCYCLES, CERTAIN FRAME WELDS DO NOT MEET MANUFACTURING SPECIFICATIONS. HIGH LOADS CREATED WHEN RIDING ON ROUGH ROAD SURFACES OR THROUGH POTHOLES CAN CAUSE THE AFFECTED WELDS TO CRACK. The specific hazard cited in the filing is: THE WELDED AREA COULD BREAK, RESULTING IN REAR SUSPENSION COLLAPSE OR LOWER CROSS MEMBER SEPARATION, INCREASING THE RISK OF A CRASH.. Distribution data in the federal record shows the product reached: United States. Distribution scope directly affects the consumer exposure window and determines whether a recall remains regional or escalates into a nationwide advisory. The remedy documented by the agency is: DEALERS WILL INSPECT AND REINFORCE THE WELDS ON ALL FRAMES. OWNER NOTIFICATION BEGAN DURING OCTOBER 2003. OWNERS SHOULD CONTACT HONDA AT 1-866-784-1870. - consumers holding this product should act on that instruction rather than relying on general guidance.
Within the same product category the archive holds 6 closely related recalls - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.
Where this recall sits in its category - 7,642 vehicles recalls on record
Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified high severity.
Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.
Severity
Critical
Affected scope
Unknown
Related Recalls
6
0 from same agency
ON SOME MOTORCYCLES, CERTAIN FRAME WELDS DO NOT MEET MANUFACTURING SPECIFICATIONS. HIGH LOADS CREATED WHEN RIDING ON ROUGH ROAD SURFACES OR THROUGH POTHOLES CAN CAUSE THE AFFECTED WELDS TO CRACK.
ON SOME MOTORCYCLES, CERTAIN FRAME WELDS DO NOT MEET MANUFACTURING SPECIFICATIONS. HIGH LOADS CREATED WHEN RIDING ON ROUGH ROAD SURFACES OR THROUGH POTHOLES CAN CAUSE THE AFFECTED WELDS TO CRACK.
THE WELDED AREA COULD BREAK, RESULTING IN REAR SUSPENSION COLLAPSE OR LOWER CROSS MEMBER SEPARATION, INCREASING THE RISK OF A CRASH.
DEALERS WILL INSPECT AND REINFORCE THE WELDS ON ALL FRAMES. OWNER NOTIFICATION BEGAN DURING OCTOBER 2003. OWNERS SHOULD CONTACT HONDA AT 1-866-784-1870.
| Attribute | Value |
|---|---|
| Agency | National Highway Traffic Safety Administration |
| Severity class | Critical |
| Status | Active |
| Recall number | 03V350000 |
| Date reported | September 26, 2003 |
| Date initiated | September 26, 2003 |
| Recalling firm | Honda |
| Affected scope | Not disclosed |
| Distribution | United States |
| Official source | NHTSA notice → |
Profile values are sourced directly from the official NHTSA enforcement record. Source: National Highway Traffic Safety Administration.
What to do with this recall
DEALERS WILL INSPECT AND REINFORCE THE WELDS ON ALL FRAMES. OWNER NOTIFICATION BEGAN DURING OCTOBER 2003. OWNERS SHOULD CONT…
This page summarizes the official NHTSA record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.
Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.
Yongkang Ruihe Metal Products Co. Ltd., of China · 2026-06-25
· 2026-06-18
CooCooBaby, of China · 2026-06-18
Kawasaki Motors Manufacturing Corp., U.S.A., of Lincoln, Nebraska · 2026-06-11
· 2026-06-11
Compare this recall with Yamazuki Recalls Youth All-Terrain Vehicles (ATVs) Due to R… →
Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: NHTSA, reported September 26, 2003. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.