Severity
Critical
NHTSA recall · Reported November 14, 2003
ON CERTAIN SPORT UTILITY VEHICLES, THE FRONT BRAKE CALIPER MOUNTING BOLTS MAY NOT BE ADEQUATELY TIGHTENED. THIS COULD RESULT IN ONE OR BOTH OF THE CALIPER MOUNTING BOLTS LOOSENI…
Infiniti recalled ON CERTAIN SPORT UTILITY VEHICLES, THE FRONT BRAKE CALIPER MOUNTING BOLTS MAY NOT BE ADEQ… - a critical-severity action.
INFINITI 2003: SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER was recalled by Infiniti in November 14, 2003. Reason: ON CERTAIN SPORT UTILITY VEHICLES, THE FRONT BRAKE CALIPER MOUNTING BOLTS MAY NOT BE ADEQUATELY TIGHTENED. T…. Remedy: DEALERS WILL TIGHTEN THE FRONT BRAKE CALIPER MOUNTING BOLTS TO ENSURE THAT THEY ARE SECUR…. Verify recall #03V476000 with the NHTSA before acting.
The recall
Infiniti issued this critical-severity NHTSA recall-ON CERTAIN SPORT UTILITY VEHICLES, THE FRONT BRAKE CALIPER MOUNTING BOLTS MAY NOT BE ADEQUATELY TIGHTENED. T….
Sourced from official NHTSA enforcement records. Verify recall #03V476000 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.
This NHTSA action (record #03V476000) was formally reported on November 14, 2003. It is classified under Critical severity, with a current status of Active. Infiniti is listed as the recalling firm. The number of affected units is not disclosed in the agency filing, which is common for drug and food recalls where lot-level tracking supersedes unit counts.
The documented reason for this recall is: ON CERTAIN SPORT UTILITY VEHICLES, THE FRONT BRAKE CALIPER MOUNTING BOLTS MAY NOT BE ADEQUATELY TIGHTENED. THIS COULD RESULT IN ONE OR BOTH OF THE CALIPER MOUNTING BOLTS LOOSENING. The specific hazard cited in the filing is: IF THIS OCCURS, IT WOULD ALLOW THE CALIPER TO ROTATE OR SEPARATE FROM ITS MOUNTING BRACKET. THIS COULD CAUSE THE BRAKE TO FAIL, REDUCING THE VEHICLE'S ABILITY TO STOP. IT COULD ALSO DAMAGE THE WHEE…. Distribution data in the federal record shows the product reached: United States. Distribution scope directly affects the consumer exposure window and determines whether a recall remains regional or escalates into a nationwide advisory. The remedy documented by the agency is: DEALERS WILL TIGHTEN THE FRONT BRAKE CALIPER MOUNTING BOLTS TO ENSURE THAT THEY ARE SECURE. OWNER NOTIFICATION BEGAN ON JANUARY 5, 2004. OWNERS SHOULD CONTACT INFINITI AT 1-800-662-6200. - consumers holding this product should act on that instruction rather than relying on general guidance.
Within the same product category the archive holds 6 closely related recalls - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.
Where this recall sits in its category - 7,642 vehicles recalls on record
Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified high severity.
Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.
Severity
Critical
Affected scope
Unknown
Related Recalls
6
0 from same agency
ON CERTAIN SPORT UTILITY VEHICLES, THE FRONT BRAKE CALIPER MOUNTING BOLTS MAY NOT BE ADEQUATELY TIGHTENED. THIS COULD RESULT IN ONE OR BOTH OF THE CALIPER MOUNTING BOLTS LOOSENING.
ON CERTAIN SPORT UTILITY VEHICLES, THE FRONT BRAKE CALIPER MOUNTING BOLTS MAY NOT BE ADEQUATELY TIGHTENED. THIS COULD RESULT IN ONE OR BOTH OF THE CALIPER MOUNTING BOLTS LOOSENING.
IF THIS OCCURS, IT WOULD ALLOW THE CALIPER TO ROTATE OR SEPARATE FROM ITS MOUNTING BRACKET. THIS COULD CAUSE THE BRAKE TO FAIL, REDUCING THE VEHICLE'S ABILITY TO STOP. IT COULD ALSO DAMAGE THE WHEEL, CAUSING THE TIRE TO GO FLAT. EITHER ONE OF THESE CONDITIONS COULD RESULT IN A CRASH.
DEALERS WILL TIGHTEN THE FRONT BRAKE CALIPER MOUNTING BOLTS TO ENSURE THAT THEY ARE SECURE. OWNER NOTIFICATION BEGAN ON JANUARY 5, 2004. OWNERS SHOULD CONTACT INFINITI AT 1-800-662-6200.
| Attribute | Value |
|---|---|
| Agency | National Highway Traffic Safety Administration |
| Severity class | Critical |
| Status | Active |
| Recall number | 03V476000 |
| Date reported | November 14, 2003 |
| Date initiated | November 14, 2003 |
| Recalling firm | Infiniti |
| Affected scope | Not disclosed |
| Distribution | United States |
| Official source | NHTSA notice → |
Profile values are sourced directly from the official NHTSA enforcement record. Source: National Highway Traffic Safety Administration.
What to do with this recall
DEALERS WILL TIGHTEN THE FRONT BRAKE CALIPER MOUNTING BOLTS TO ENSURE THAT THEY ARE SECURE. OWNER NOTIFICATION BEGAN ON JANUARY 5…
This page summarizes the official NHTSA record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.
Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.
Yongkang Ruihe Metal Products Co. Ltd., of China · 2026-06-25
· 2026-06-18
CooCooBaby, of China · 2026-06-18
Kawasaki Motors Manufacturing Corp., U.S.A., of Lincoln, Nebraska · 2026-06-11
· 2026-06-11
Compare this recall with Yamazuki Recalls Youth All-Terrain Vehicles (ATVs) Due to R… →
Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: NHTSA, reported November 14, 2003. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.