PlainRecalls
No agency classActive

CPSC recall · Reported November 15, 2004

CPSC, Robert Bosch Tool Corp. Announce Recall of Abrasive Cut-Off Wheels

These abrasive cut-off wheels do not have correct speed rating labels. If used at the labeled speed rating, the wheels can burst, causing possible injury to user and bystanders.

Recall #
05046
Affected scope
About 6,400
Compiled from official public sources by the publisher.
Verify with CPSC →
View my saved recalls

Robert Bosch Tool Corp., of Mt. Prospect, Ill. recalled The wheels were sold under the "BOSCH" brand name under the following catalog numbers: Ca….

CPSC, Robert Bosch Tool Corp. Announce Recall of Abrasive Cut-Off Wheels was recalled by Robert Bosch Tool Corp., of Mt. Prospect, Ill. in November 15, 2004. Reason: These abrasive cut-off wheels do not have correct speed rating labels. If used at the labeled speed rating, t…. Remedy: Consumers should stop using the recalled wheels immediately and contact Bosch for return …. Verify recall #05046 with the CPSC before acting.

The recall

Robert Bosch Tool Corp., of Mt. Prospect, Ill. issued this CPSC recall-These abrasive cut-off wheels do not have correct speed rating labels. If used at the labeled speed rating, t….

None
agency class
November 15, 2004
reported

Sourced from official CPSC enforcement records. Verify recall #05046 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.

Recall Insight

This recall's affected scope, documented in the Recall Profile below, stays within a single-region or limited-distribution footprint. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. Consumers holding this product should act on the agency's documented remedy above rather than relying on general guidance.

Within the same product category the archive holds 6 closely related recalls, 6 from CPSC - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.

Household Products recalls over time

Where this recall sits in its category - 3,089 household products recalls on record

50100150200250 20052008201120142017202020232026 148

Product description

The wheels were sold under the "BOSCH" brand name under the following catalog numbers: Catalog Number Description 2610917994 12-inch type 1 abrasive cut off wheel intended for cutting stainless steel in stationary machines 2610917996 12-inch type 1 abrasive cut off wheel intended for metal cutting in portable machines with 1-inch arbor 2610917998 12-inch type 1 abrasive cut off wheel intended for metal cutting in portable machines with 1-inch arbor 2610918000 12-inch type 1 abrasive cut off wheel intended for concrete/masonry in portable machines with 1-inch arbor 2610918002 12-inch type 1 abrasive cut off wheel intended for concrete/masonry in portable machines with 20mm arbor 2610918004 12-inch type 1 abrasive cut off wheel intended for asphalt/green concrete for portable machines with 1" arbor 2610918006 12-inch type 1 abrasive cut off wheel intended for asphalt/green concrete for portable machines with 20mm arbor 2610918009 3-1/16-inch AL Oxide metal cutting wheel, 3/8-inch arbor 2610918010 4-1/16-inch AL Oxide metal cutting wheel, 3/8-inch arbor 2610918011 2-1/2-inch by .045-inch AL Oxide metal cutting wheel, 3/8-inch arbor 2610918012 2-1/2-inch by .045-inch AL Oxide metal cutting wheel, 1/4-inch arbor 2610918013 3-inch by .045-inch AL Oxide metal cutting wheel, 3/8-inch arbor 2610918014 3-inch by .045-inch AL Oxide metal cutting wheel, 1/4-inch arbor 2610918015 4-inch by .045-inch AL Oxide metal cutting wheel, 3/8-inch arbor 2610918016 4-inch by .045-inch AL Oxide metal cutting wheel, 1/4-inch arbor 2610918017 4-inch by .045-inch AL Oxide metal cutting wheel, 5/8-inch arbor The recalled 12-inch-diameter wheels can be identified by a stamped expiration date in the metal center ring of "V 6/2007" or before. Expiration date "V 7/2007" and after are not included in this recall. The smaller wheels (2-1/2-inch to 4-inch diameter) under this recall will state "Made in Bulgaria." The replacement smaller wheels will state "made in Canada," and are not affected by this recall.

Reason for recall

These abrasive cut-off wheels do not have correct speed rating labels. If used at the labeled speed rating, the wheels can burst, causing possible injury to user and bystanders.

Remedy, what to do

Consumers should stop using the recalled wheels immediately and contact Bosch for return and replacement instructions.

Recall Profile

Structured summary of the CPSC recall record
Attribute Value
Agency U.S. Consumer Product Safety Commission
Severity class Not classified by agency
Status Active
Recall number 05046
Date reported November 15, 2004
Date initiated November 15, 2004
Recalling firm Robert Bosch Tool Corp., of Mt. Prospect, Ill.
Affected scope About 6,400
Distribution Not disclosed
Official source CPSC notice →

Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.

What to do with this recall

Consumers should stop using the recalled wheels immediately and contact Bosch for return and replacement instructions.

  • Check the recall number (05046) and product description against the item you own. Search the archive
  • Confirm the current status and remedy on the official CPSC notice before acting. CPSC notice
  • Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next

This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.

Frequently Asked Questions

What product was recalled? ▼
The wheels were sold under the "BOSCH" brand name under the following catalog numbers: Catalog Number Description 2610917994 12-inch type 1 abrasive cut off wheel intended for cutting stainless steel in stationary machines 2610917996 12-inch type 1 abrasive cut off wheel intended for metal cutting in portable machines with 1-inch arbor 2610917998 12-inch type 1 abrasive cut off wheel intended for metal cutting in portable machines with 1-inch arbor 2610918000 12-inch type 1 abrasive cut off wheel intended for concrete/masonry in portable machines with 1-inch arbor 2610918002 12-inch type 1 abrasive cut off wheel intended for concrete/masonry in portable machines with 20mm arbor 2610918004 12-inch type 1 abrasive cut off wheel intended for asphalt/green concrete for portable machines with 1" arbor 2610918006 12-inch type 1 abrasive cut off wheel intended for asphalt/green concrete for portable machines with 20mm arbor 2610918009 3-1/16-inch AL Oxide metal cutting wheel, 3/8-inch arbor 2610918010 4-1/16-inch AL Oxide metal cutting wheel, 3/8-inch arbor 2610918011 2-1/2-inch by .045-inch AL Oxide metal cutting wheel, 3/8-inch arbor 2610918012 2-1/2-inch by .045-inch AL Oxide metal cutting wheel, 1/4-inch arbor 2610918013 3-inch by .045-inch AL Oxide metal cutting wheel, 3/8-inch arbor 2610918014 3-inch by .045-inch AL Oxide metal cutting wheel, 1/4-inch arbor 2610918015 4-inch by .045-inch AL Oxide metal cutting wheel, 3/8-inch arbor 2610918016 4-inch by .045-inch AL Oxide metal cutting wheel, 1/4-inch arbor 2610918017 4-inch by .045-inch AL Oxide metal cutting wheel, 5/8-inch arbor The recalled 12-inch-diameter wheels can be identified by a stamped expiration date in the metal center ring of "V 6/2007" or before. Expiration date "V 7/2007" and after are not included in this recall. The smaller wheels (2-1/2-inch to 4-inch diameter) under this recall will state "Made in Bulgaria." The replacement smaller wheels will state "made in Canada," and are not affected by this recall.. Recalled by Robert Bosch Tool Corp., of Mt. Prospect, Ill.. Units affected: About 6,400.
Why was this product recalled? ▼
These abrasive cut-off wheels do not have correct speed rating labels. If used at the labeled speed rating, the wheels can burst, causing possible injury to user and bystanders.
What should consumers do? ▼
Consumers should stop using the recalled wheels immediately and contact Bosch for return and replacement instructions.
Which agency issued this recall? ▼
This recall was issued by the CPSC on November 15, 2004. CPSC does not publish a hazard classification for this recall. Recall number: 05046.
How do I report an injury from a recalled product? ▼
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.

Nationwide recalls with similar severity or category timing

Consumer-product notices outside this firm and state, matched by severity timing and product category.

Similar severity · nearest report date

Same archive severity grade, closest by report date among other firms and states.

CPSC, RMM Corporation Announce Recall of … 2004-11-15 CPSC, York International Announce Recall … 2004-11-15 CPSC, The Nautilus Group Announce Recall … 2004-11-16 CPSC, Maytag Corp. Announce Recall of Jen… 2004-11-17

Similar Household Products · nearest report date

Same product category, closest by report date among other firms and states (deduped against the severity set).

CPSC, Country Home Products, Inc. Announc… 2004-11-17 CPSC, Ocean Management Systems Announce R… 2004-11-17 CPSC, Byer of Maine Announce Recall to Ex… 2004-11-19 CPSC, Emerson Motor Co. Announce Recall o… 2004-11-19

Compare this recall with CCM Hockey U.S. Recalls FMHVR Hybrid Visors and ACCHVR Repl… → · All Household Products recalls

This recall: CPSC, reported November 15, 2004. Severity classes follow each agency's own taxonomy; related-recall context is computed across the full archive.

Methodology · Corrections · Archive as of August 2026