PlainRecalls
ModerateActive

CPSC recall · Reported November 29, 2005

CPSC, Porter-Cable Announce Recall to Repair Circular Saws

The lower guard on these saws could stick in the open position, posing a risk of severe lacerations to consumers.

Recall #
06040
Affected scope
About 196,000 units
Compiled from official public sources by the editorial team.
Verify with CPSC →
View my saved recalls

Porter-Cable, of Jackson, Tenn. recalled The recall involves Porter-Cable® 7¼-inch MAG-Saw™ Circular Saws with model numbers 324MA… - a moderate-severity action.

CPSC, Porter-Cable Announce Recall to Repair Circular Saws was recalled by Porter-Cable, of Jackson, Tenn. in November 29, 2005. Reason: The lower guard on these saws could stick in the open position, posing a risk of severe lacerations to consum…. Remedy: Consumers should stop using the circular saws immediately and contact Porter-Cable for th…. Verify recall #06040 with the CPSC before acting.

The recall

Porter-Cable, of Jackson, Tenn. issued this moderate-severity CPSC recall-The lower guard on these saws could stick in the open position, posing a risk of severe lacerations to consum….

Moderate
severity level
November 29, 2005
reported

Sourced from official CPSC enforcement records. Verify recall #06040 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.

Recall Insight

This CPSC action (record #06040) was formally reported on November 29, 2005. It is classified under Moderate severity, with a current status of Active. Porter-Cable, of Jackson, Tenn. is listed as the recalling firm. Federal records list the affected scope as About 196,000 units.

The documented reason for this recall is: The lower guard on these saws could stick in the open position, posing a risk of severe lacerations to consumers. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Consumers should stop using the circular saws immediately and contact Porter-Cable for the location of the nearest service center to receive a free inspection and repair, if necessary. - consumers holding this product should act on that instruction rather than relying on general guidance.

Within the same product category the archive holds 6 closely related recalls, 6 from CPSC - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.

Electronics recalls over time

Where this recall sits in its category - 609 electronics recalls on record

1020304050 20052008201120142017202020232026 36
Severity2487872426High severity (most serious)Moderate severityLow severity
Where this recall sits in the database

Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.

Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.

Severity

Moderate

Affected scope

About 196,000 units

Related Recalls

6

6 from same agency

Product description

The recall involves Porter-Cable® 7¼-inch MAG-Saw™ Circular Saws with model numbers 324MAG (serial numbers 10001 through 108962), 325MAG (serial numbers 10001 through 014712), 423MAG (serial numbers 10001 through 100371), and 424MAG (serial numbers 10001 through 012690). The model and serial numbers are located on a label on the top of the saws. Units marked with a "T" at the location shown below have been inspected and are not affected by this recall. "Porter-Cable®" is written on the side of these saws.

Reason for recall

The lower guard on these saws could stick in the open position, posing a risk of severe lacerations to consumers.

Remedy, what to do

Consumers should stop using the circular saws immediately and contact Porter-Cable for the location of the nearest service center to receive a free inspection and repair, if necessary.

Recall Profile

Structured summary of the CPSC recall record
Attribute Value
Agency U.S. Consumer Product Safety Commission
Severity class Moderate
Status Active
Recall number 06040
Date reported November 29, 2005
Date initiated November 29, 2005
Recalling firm Porter-Cable, of Jackson, Tenn.
Affected scope About 196,000 units
Distribution Not disclosed
Official source CPSC notice →

Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.

What to do with this recall

Consumers should stop using the circular saws immediately and contact Porter-Cable for the location of the nearest service center…

  • Check the recall number (06040) and product description against the item you own. Search the archive
  • Confirm the current status and remedy on the official CPSC notice before acting. CPSC notice
  • Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next

This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.

Frequently Asked Questions

What product was recalled?
The recall involves Porter-Cable® 7¼-inch MAG-Saw™ Circular Saws with model numbers 324MAG (serial numbers 10001 through 108962), 325MAG (serial numbers 10001 through 014712), 423MAG (serial numbers 10001 through 100371), and 424MAG (serial numbers 10001 through 012690). The model and serial numbers are located on a label on the top of the saws. Units marked with a "T" at the location shown below have been inspected and are not affected by this recall. "Porter-Cable®" is written on the side of these saws.. Recalled by Porter-Cable, of Jackson, Tenn.. Units affected: About 196,000 units.
Why was this product recalled?
The lower guard on these saws could stick in the open position, posing a risk of severe lacerations to consumers.
What should consumers do?
Consumers should stop using the circular saws immediately and contact Porter-Cable for the location of the nearest service center to receive a free inspection and repair, if necessary.
Which agency issued this recall?
This recall was issued by the CPSC on November 29, 2005. Severity: Moderate. Recall number: 06040.
How do I check if my product is affected by a recall?
Check the product description and recall number (06040) against your product. Visit the official CPSC website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product?
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.

Nearby Recalls in This Category

Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.

Compare this recall with Projecting LED Finger Light Toys Recalled Due to Risk of Se… →

Browse all Electronics recalls →

Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: CPSC, reported November 29, 2005. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.