Severity
Moderate
ModerateActive
CPSC recall · Reported August 3, 2007
Serious Facial Injury from Explosion of Aerosol Can Prompts Sherwin-Williams Recall; Firm Warns Consumers Not to Handle Hi-Heat™ Coating Cans
The aerosol cans can over-pressurize and explode, posing a risk of injury to consumers.
Compiled from official public sources by the editorial team.
Verify with CPSC →
The Sherwin-Williams Co., of Cleveland, Ohio recalled The recall involves Thermo-Tec Hi-Heat aerosol coating used to color and protect Thermo-T… - a moderate-severity action.
Serious Facial Injury from Explosion of Aerosol Can Prompts Sherwin-Williams Recall; Firm… was recalled by The Sherwin-Williams Co., of Cleveland, Ohio in August 3, 2007. Reason: The aerosol cans can over-pressurize and explode, posing a risk of injury to consumers.. Remedy: Consumers should not handle the cans and contact Sherwin-Williams immediately. A represen…. Verify recall #07259 with the CPSC before acting.
The recall
The Sherwin-Williams Co., of Cleveland, Ohio issued this moderate-severity CPSC recall-The aerosol cans can over-pressurize and explode, posing a risk of injury to consumers..
- Moderate
- severity level
- August 3, 2007
- reported
Sourced from official CPSC enforcement records. Verify recall #07259 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.
Recall Insight
This CPSC action (record #07259) was formally reported on August 3, 2007. It is classified under Moderate severity, with a current status of Active. The Sherwin-Williams Co., of Cleveland, Ohio is listed as the recalling firm. Federal records list the affected scope as About 3,000.
The documented reason for this recall is: The aerosol cans can over-pressurize and explode, posing a risk of injury to consumers. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Consumers should not handle the cans and contact Sherwin-Williams immediately. A representative will be dispatched within 48 hours to safely collect the recalled cans. Consumers will be sent a $15.00… - consumers holding this product should act on that instruction rather than relying on general guidance.
Within the same product category the archive holds 6 closely related recalls, 6 from CPSC - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.
Household Products recalls over time
Where this recall sits in its category - 3,056 household products recalls on record
Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.
Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.
Affected scope
About 3,000
Related Recalls
6
6 from same agency
Product description
The recall involves Thermo-Tec Hi-Heat aerosol coating used to color and protect Thermo-Tec automotive exhaust wrap. The part number (#12002) is printed above the UPC, and the date code (#B1815) is written on the bottom of the can. The 11-ounce aerosol can is mostly blue with orange and yellow flames and has an aluminum-colored cap. The can states "HI-HEAT COATING 2000°F" in large white letters on the front of the can.
Reason for recall
The aerosol cans can over-pressurize and explode, posing a risk of injury to consumers.
Remedy, what to do
Consumers should not handle the cans and contact Sherwin-Williams immediately. A representative will be dispatched within 48 hours to safely collect the recalled cans. Consumers will be sent a $15.00 check for each recalled can that is collected.
Recall Profile
| Attribute | Value |
|---|---|
| Agency | U.S. Consumer Product Safety Commission |
| Severity class | Moderate |
| Status | Active |
| Recall number | 07259 |
| Date reported | August 3, 2007 |
| Date initiated | August 3, 2007 |
| Recalling firm | The Sherwin-Williams Co., of Cleveland, Ohio |
| Affected scope | About 3,000 |
| Distribution | Not disclosed |
| Official source | CPSC notice → |
Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.
What to do with this recall
Consumers should not handle the cans and contact Sherwin-Williams immediately. A representative will be dispatched within 48 hour…
- Check the recall number (07259) and product description against the item you own. Search the archive
- Confirm the current status and remedy on the official CPSC notice before acting. CPSC notice
- Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next
This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.
Frequently Asked Questions
What product was recalled? ▼
The recall involves Thermo-Tec Hi-Heat aerosol coating used to color and protect Thermo-Tec automotive exhaust wrap. The part number (#12002) is printed above the UPC, and the date code (#B1815) is written on the bottom of the can. The 11-ounce aerosol can is mostly blue with orange and yellow flames and has an aluminum-colored cap. The can states "HI-HEAT COATING 2000°F" in large white letters on the front of the can.. Recalled by The Sherwin-Williams Co., of Cleveland, Ohio. Units affected: About 3,000.
Why was this product recalled? ▼
The aerosol cans can over-pressurize and explode, posing a risk of injury to consumers.
What should consumers do? ▼
Consumers should not handle the cans and contact Sherwin-Williams immediately. A representative will be dispatched within 48 hours to safely collect the recalled cans. Consumers will be sent a $15.00 check for each recalled can that is collected.
Which agency issued this recall? ▼
This recall was issued by the CPSC on August 3, 2007. Severity: Moderate. Recall number: 07259.
How do I check if my product is affected by a recall? ▼
Check the product description and recall number (07259) against your product. Visit the official CPSC website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product? ▼
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.
Nearby Recalls in This Category
Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.
CPSC Moderate
Cooper Lighting Recalls Metalux Optimized High Bay LED Light Fixtures Due to Fire Hazard
Cooper Lighting, LLC, of Peachtree City, Georgia · 2026-07-02
CPSC Moderate
Winco Fireworks International Recalls Roman Candles 8 Shot Fireworks Due to Risk of Serious Injury from Explosion and B…
· 2026-07-02
CPSC Moderate
Winco Fireworks International Recalls Unity 7 Shot 200 Gram Aerial Cake Fireworks Due to Risk of Serious Injury from Ex…
· 2026-07-02
CPSC Moderate
Kith Retail Recalls Children's Loungewear Sets Due to Risk of Serious Injury from Burn Hazard; Violate Mandatory Standa…
· 2026-06-25
CPSC Moderate
Southern Telecom Expands Recall of Lomi Waxing Kits Due to Risk of Serious Injury or Death from Fire and Burn Hazards; …
· 2026-06-25
Compare this recall with Cooper Lighting Recalls Metalux Optimized High Bay LED Ligh… →
Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: CPSC, reported August 3, 2007. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.