PlainRecalls
ModerateActive

NHTSA recall · Reported March 6, 2008

LEXUS 2000-2003: VISIBILITY:GLASS, SIDE/REAR

POLYMER PROCESS DEVELOPMENT IS RECALLING 931 UNITS OF BACK GLASS, P/NO. FB20415ZPY, SOLD AS REPLACEMENT EQUIPMENT FOR USE ON 1999-2004 LEXUS RX300 VEHICLES. THE GLASS FAILS TO CO…

Recall #
08E020000
Compiled from official public sources by the editorial team.
Verify with NHTSA →
View my saved recalls

Lexus recalled POLYMER PROCESS DEVELOPMENT IS RECALLING 931 UNITS OF BACK GLASS, P/NO. FB20415ZPY, SOLD … - a moderate-severity action.

LEXUS 2000-2003: VISIBILITY:GLASS, SIDE/REAR was recalled by Lexus in March 6, 2008. Reason: POLYMER PROCESS DEVELOPMENT IS RECALLING 931 UNITS OF BACK GLASS, P/NO. FB20415ZPY, SOLD AS REPLACEMENT EQUIP…. Remedy: POLYMER WILL NOTIFY OWNERS AND REPLACE THE AFFECTED GLASS FREE OF CHARGE. THE RECALL BEG…. Verify recall #08E020000 with the NHTSA before acting.

The recall

Lexus issued this moderate-severity NHTSA recall-POLYMER PROCESS DEVELOPMENT IS RECALLING 931 UNITS OF BACK GLASS, P/NO. FB20415ZPY, SOLD AS REPLACEMENT EQUIP….

Moderate
severity level
March 6, 2008
reported

Sourced from official NHTSA enforcement records. Verify recall #08E020000 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.

Recall Insight

This NHTSA action (record #08E020000) was formally reported on March 6, 2008. It is classified under Moderate severity, with a current status of Active. Lexus is listed as the recalling firm. The number of affected units is not disclosed in the agency filing, which is common for drug and food recalls where lot-level tracking supersedes unit counts.

The documented reason for this recall is: POLYMER PROCESS DEVELOPMENT IS RECALLING 931 UNITS OF BACK GLASS, P/NO. FB20415ZPY, SOLD AS REPLACEMENT EQUIPMENT FOR USE ON 1999-2004 LEXUS RX300 VEHICLES. THE GLASS FAILS TO CONFORM TO THE AUTOMOTIVE GLAZING MATERIAL… The specific hazard cited in the filing is: THE PURPOSE OF THIS STANDARD IS TO REDUCE INJURIES RESULTING FROM IMPACT TO GLAZING SURFACES.. Distribution data in the federal record shows the product reached: United States. Distribution scope directly affects the consumer exposure window and determines whether a recall remains regional or escalates into a nationwide advisory. The remedy documented by the agency is: POLYMER WILL NOTIFY OWNERS AND REPLACE THE AFFECTED GLASS FREE OF CHARGE. THE RECALL BEGAN ON APRIL 18, 2008. OWNERS MAY CONTACT POLYMER TOLL-FREE AT 800-510-9879. - consumers holding this product should act on that instruction rather than relying on general guidance.

Within the same product category the archive holds 6 closely related recalls - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.

Vehicles recalls over time

Where this recall sits in its category - 7,642 vehicles recalls on record

0200400600 20052008201120142017202020232026 82
Severity2487872426High severity (most serious)Moderate severityLow severity
Where this recall sits in the database

Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.

Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.

Severity

Moderate

Affected scope

Unknown

Related Recalls

6

0 from same agency

Product description

POLYMER PROCESS DEVELOPMENT IS RECALLING 931 UNITS OF BACK GLASS, P/NO. FB20415ZPY, SOLD AS REPLACEMENT EQUIPMENT FOR USE ON 1999-2004 LEXUS RX300 VEHICLES. THE GLASS FAILS TO CONFORM TO THE AUTOMOTIVE GLAZING MATERIAL REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 205, GLAZING MATERIALS.

Reason for recall

POLYMER PROCESS DEVELOPMENT IS RECALLING 931 UNITS OF BACK GLASS, P/NO. FB20415ZPY, SOLD AS REPLACEMENT EQUIPMENT FOR USE ON 1999-2004 LEXUS RX300 VEHICLES. THE GLASS FAILS TO CONFORM TO THE AUTOMOTIVE GLAZING MATERIAL REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 205, GLAZING MATERIALS.

Hazard

THE PURPOSE OF THIS STANDARD IS TO REDUCE INJURIES RESULTING FROM IMPACT TO GLAZING SURFACES.

Remedy, what to do

POLYMER WILL NOTIFY OWNERS AND REPLACE THE AFFECTED GLASS FREE OF CHARGE. THE RECALL BEGAN ON APRIL 18, 2008. OWNERS MAY CONTACT POLYMER TOLL-FREE AT 800-510-9879.

Recall Profile

Structured summary of the NHTSA recall record
Attribute Value
Agency National Highway Traffic Safety Administration
Severity class Moderate
Status Active
Recall number 08E020000
Date reported March 6, 2008
Date initiated March 6, 2008
Recalling firm Lexus
Affected scope Not disclosed
Distribution United States
Official source NHTSA notice →

Profile values are sourced directly from the official NHTSA enforcement record. Source: National Highway Traffic Safety Administration.

What to do with this recall

POLYMER WILL NOTIFY OWNERS AND REPLACE THE AFFECTED GLASS FREE OF CHARGE. THE RECALL BEGAN ON APRIL 18, 2008. OWNERS MAY CONTAC…

  • Check the recall number (08E020000) and product description against the item you own. Search the archive
  • Confirm the current status and remedy on the official NHTSA notice before acting. NHTSA notice
  • Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next

This page summarizes the official NHTSA record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.

Frequently Asked Questions

What product was recalled?
POLYMER PROCESS DEVELOPMENT IS RECALLING 931 UNITS OF BACK GLASS, P/NO. FB20415ZPY, SOLD AS REPLACEMENT EQUIPMENT FOR USE ON 1999-2004 LEXUS RX300 VEHICLES. THE GLASS FAILS TO CONFORM TO THE AUTOMOTIVE GLAZING MATERIAL REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 205, GLAZING MATERIALS.. Recalled by Lexus.
Why was this product recalled?
POLYMER PROCESS DEVELOPMENT IS RECALLING 931 UNITS OF BACK GLASS, P/NO. FB20415ZPY, SOLD AS REPLACEMENT EQUIPMENT FOR USE ON 1999-2004 LEXUS RX300 VEHICLES. THE GLASS FAILS TO CONFORM TO THE AUTOMOTIVE GLAZING MATERIAL REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 205, GLAZING MATERIALS.
What should consumers do?
POLYMER WILL NOTIFY OWNERS AND REPLACE THE AFFECTED GLASS FREE OF CHARGE. THE RECALL BEGAN ON APRIL 18, 2008. OWNERS MAY CONTACT POLYMER TOLL-FREE AT 800-510-9879.
Which agency issued this recall?
This recall was issued by the NHTSA on March 6, 2008. Severity: Moderate. Recall number: 08E020000.
Where was the recalled product distributed?
Distribution: United States.
How do I check if my product is affected by a recall?
Check the product description and recall number (08E020000) against your product. Visit the official NHTSA website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product?
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.

Nearby Recalls in This Category

Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.

Compare this recall with Yamazuki Recalls Youth All-Terrain Vehicles (ATVs) Due to R… →

Browse all Vehicles recalls →

Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: NHTSA, reported March 6, 2008. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.