PlainRecalls
NHTSA Critical Active

MACK 2009: PARKING BRAKE:CONVENTIONAL:AIR

Reported: April 17, 2008 Initiated: April 17, 2008 #08V177000

Product Description

MACK IS RECALLING 66 MY 2009 GU TRUCKS EQUIPPED WITH BENDIX MV-3 DASH CONTROL VALVES. THE MOLDED VALVE BODY HAS AN INCORRECT CORE PIN IN THE INJECTION MOLD CAUSING THE VALVE BODY TO BE OVERSIZED IN THE DOUBLE CHECK VALVE AREA. THIS CONDITION CAN ALLOW THE RUBBER DOUBLE CHECK VALVE TO BECOME LODGED IN THE BODY OPENING UNDER CERTAIN CIRCUMSTANCES.

Reason for Recall

MACK IS RECALLING 66 MY 2009 GU TRUCKS EQUIPPED WITH BENDIX MV-3 DASH CONTROL VALVES. THE MOLDED VALVE BODY HAS AN INCORRECT CORE PIN IN THE INJECTION MOLD CAUSING THE VALVE BODY TO BE OVERSIZED IN THE DOUBLE CHECK VALVE AREA. THIS CONDITION CAN ALLOW THE RUBBER DOUBLE CHECK VALVE TO BECOME LODGED IN THE BODY OPENING UNDER CERTAIN CIRCUMSTANCES.

Hazard

IF THE DOUBLE CHECK VALVE BECOMES LODGED, IN THE EVENT OF A PRIMARY RESERVOIR FAILURE, AIR PRESSURE CAN LEAK PAST THE LODGED DOUBLE CHECK VALVE THEREBY DEPLETING THE SECONDARY RESERVOIR, CAUSING REDUCED ABILITY FOR MODULATING THE SERVICE EMERGENCY BRAKES INCREASING THE RISK OF A CRASH.

Remedy

DEALERS WILL INSPECT THE MV-3 DASH VALVE FOR THE PRODUCTION DATE CODE. VALVES IN THE AFFECTED PRODUCTION LOTS WILL BE REPLACED FREE OF CHARGE. THE RECALL BEGAN ON MAY 9, 2008. OWNERS MAY CONTACT MACK TRUCKS AT 1-800-528-6586.

Details

Recalling Firm
MACK
Distribution
United States
Official Source
https://www.nhtsa.gov/recalls?nhtsaId=08V177000

Frequently Asked Questions

What product was recalled? ▼
MACK IS RECALLING 66 MY 2009 GU TRUCKS EQUIPPED WITH BENDIX MV-3 DASH CONTROL VALVES. THE MOLDED VALVE BODY HAS AN INCORRECT CORE PIN IN THE INJECTION MOLD CAUSING THE VALVE BODY TO BE OVERSIZED IN THE DOUBLE CHECK VALVE AREA. THIS CONDITION CAN ALLOW THE RUBBER DOUBLE CHECK VALVE TO BECOME LODGED IN THE BODY OPENING UNDER CERTAIN CIRCUMSTANCES.. Recalled by MACK.
Why was this product recalled? ▼
MACK IS RECALLING 66 MY 2009 GU TRUCKS EQUIPPED WITH BENDIX MV-3 DASH CONTROL VALVES. THE MOLDED VALVE BODY HAS AN INCORRECT CORE PIN IN THE INJECTION MOLD CAUSING THE VALVE BODY TO BE OVERSIZED IN THE DOUBLE CHECK VALVE AREA. THIS CONDITION CAN ALLOW THE RUBBER DOUBLE CHECK VALVE TO BECOME LODGED IN THE BODY OPENING UNDER CERTAIN CIRCUMSTANCES.
What should consumers do? ▼
DEALERS WILL INSPECT THE MV-3 DASH VALVE FOR THE PRODUCTION DATE CODE. VALVES IN THE AFFECTED PRODUCTION LOTS WILL BE REPLACED FREE OF CHARGE. THE RECALL BEGAN ON MAY 9, 2008. OWNERS MAY CONTACT MACK TRUCKS AT 1-800-528-6586.
Which agency issued this recall? ▼
This recall was issued by the NHTSA on April 17, 2008. Severity: Critical. Recall number: 08V177000.

Related Recalls

NHTSA Critical

LEXUS 2025: POWER TRAIN:AUTOMATIC TRANSMISSION

LEXUS · 2026-02-18
NHTSA Critical

CADILLAC,CHEVROLET,GMC 2022: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE

CADILLAC,CHEVROLET,GMC · 2026-02-13
NHTSA Critical

CHEVROLET,GMC 2020-2022: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE

CHEVROLET,GMC · 2026-02-12
NHTSA Critical

CADILLAC 2024: BACK OVER PREVENTION:SOFTWARE

CADILLAC · 2026-02-12
NHTSA Critical

NISSAN 2024-2025: FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM:THROTTLEBODY/MANIFOLD

NISSAN · 2026-02-12

Explore Related Data

Vehicle Safety → Drug Information →