PlainRecalls
ModerateActive

CPSC recall · Reported December 11, 2008

The Toro Company Reannounces Recall of Electric Blowers Due to Projectile Hazards

The blower's impeller, which is a rotating component on the blower, can break, resulting in pieces of plastic flying out of the blower. This poses a risk of serious injury to the …

Recall #
09062
Affected scope
About 900,000
Compiled from official public sources by the editorial team.
Verify with CPSC →
View my saved recalls

The Toro Company, of Bloomington, Minn. recalled The recall involves Toro Power Sweep electric blower model 51586 that was manufactured be… - a moderate-severity action.

The Toro Company Reannounces Recall of Electric Blowers Due to Projectile Hazards was recalled by The Toro Company, of Bloomington, Minn. in December 11, 2008. Reason: The blower's impeller, which is a rotating component on the blower, can break, resulting in pieces of plastic…. Remedy: Consumers should stop using the recalled blowers immediately and contact Toro to receive …. Verify recall #09062 with the CPSC before acting.

The recall

The Toro Company, of Bloomington, Minn. issued this moderate-severity CPSC recall-The blower's impeller, which is a rotating component on the blower, can break, resulting in pieces of plastic….

Moderate
severity level
December 11, 2008
reported

Sourced from official CPSC enforcement records. Verify recall #09062 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.

Recall Insight

This CPSC action (record #09062) was formally reported on December 11, 2008. It is classified under Moderate severity, with a current status of Active. The Toro Company, of Bloomington, Minn. is listed as the recalling firm. Federal records list the affected scope as About 900,000.

The documented reason for this recall is: The blower's impeller, which is a rotating component on the blower, can break, resulting in pieces of plastic flying out of the blower. This poses a risk of serious injury to the user or a bystander. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Consumers should stop using the recalled blowers immediately and contact Toro to receive a replacement blower. - consumers holding this product should act on that instruction rather than relying on general guidance.

Within the same product category the archive holds 6 closely related recalls, 6 from CPSC - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.

Appliances recalls over time

Where this recall sits in its category - 419 appliances recalls on record

0102030405060 20052008201120142017202020232026 9
Severity2487872426High severity (most serious)Moderate severityLow severity
Where this recall sits in the database

Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.

Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.

Severity

Moderate

Affected scope

About 900,000

Related Recalls

6

6 from same agency

Product description

The recall involves Toro Power Sweep electric blower model 51586 that was manufactured between 2000 and 2002. The recalled units have serial numbers that range between 000055100 and 220255609. There are two decals on the main housing of the blower. One decal reads, "TORO Power Sweep" and the decal on the opposite side of the blower contains the model number and serial number (shown by the letter "A" in the picture). The recalled units can be identified by a black impeller fan, which can be seen through the air inlet screen on the bottom of the unit.

Reason for recall

The blower's impeller, which is a rotating component on the blower, can break, resulting in pieces of plastic flying out of the blower. This poses a risk of serious injury to the user or a bystander.

Remedy, what to do

Consumers should stop using the recalled blowers immediately and contact Toro to receive a replacement blower.

Recall Profile

Structured summary of the CPSC recall record
Attribute Value
Agency U.S. Consumer Product Safety Commission
Severity class Moderate
Status Active
Recall number 09062
Date reported December 11, 2008
Date initiated December 11, 2008
Recalling firm The Toro Company, of Bloomington, Minn.
Affected scope About 900,000
Distribution Not disclosed
Official source CPSC notice →

Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.

What to do with this recall

Consumers should stop using the recalled blowers immediately and contact Toro to receive a replacement blower.

  • Check the recall number (09062) and product description against the item you own. Search the archive
  • Confirm the current status and remedy on the official CPSC notice before acting. CPSC notice
  • Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next

This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.

Frequently Asked Questions

What product was recalled?
The recall involves Toro Power Sweep electric blower model 51586 that was manufactured between 2000 and 2002. The recalled units have serial numbers that range between 000055100 and 220255609. There are two decals on the main housing of the blower. One decal reads, "TORO Power Sweep" and the decal on the opposite side of the blower contains the model number and serial number (shown by the letter "A" in the picture). The recalled units can be identified by a black impeller fan, which can be seen through the air inlet screen on the bottom of the unit.. Recalled by The Toro Company, of Bloomington, Minn.. Units affected: About 900,000.
Why was this product recalled?
The blower's impeller, which is a rotating component on the blower, can break, resulting in pieces of plastic flying out of the blower. This poses a risk of serious injury to the user or a bystander.
What should consumers do?
Consumers should stop using the recalled blowers immediately and contact Toro to receive a replacement blower.
Which agency issued this recall?
This recall was issued by the CPSC on December 11, 2008. Severity: Moderate. Recall number: 09062.
How do I check if my product is affected by a recall?
Check the product description and recall number (09062) against your product. Visit the official CPSC website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product?
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.

Nearby Recalls in This Category

Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.

Compare this recall with HSN Recalls Kitchen HQ Thermal Insulated Bowls Due to Fire … →

Browse all Appliances recalls →

Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: CPSC, reported December 11, 2008. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.