PlainRecalls
ModerateActive

CPSC recall · Reported May 27, 2010

Hoover Recalls Upright Vacuum Cleaners Due to Fire and Shock Hazards

The power cord is not properly routed or securely seated in the cord rewind assembly allowing the power cord to be pulled loose. This poses fire and shock hazards.

Recall #
10248
Affected scope
About 108,000
Compiled from official public sources by the editorial team.
Verify with CPSC →
View my saved recalls

The CPSC recalled This recall involves Hoover® WindTunnel T-Series™ Bagless Upright vacuum cleaners with th… - a moderate-severity action.

Hoover Recalls Upright Vacuum Cleaners Due to Fire and Shock Hazards was recalled and listed by the CPSC in May 27, 2010. Reason: The power cord is not properly routed or securely seated in the cord rewind assembly allowing the power cord …. Remedy: Consumers should immediately stop using the recalled vacuum cleaners and contact Hoover f…. Verify recall #10248 with the CPSC before acting.

The recall

issued this moderate-severity CPSC recall-The power cord is not properly routed or securely seated in the cord rewind assembly allowing the power cord ….

Moderate
severity level
May 27, 2010
reported

Sourced from official CPSC enforcement records. Verify recall #10248 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.

Recall Insight

This CPSC action (record #10248) was formally reported on May 27, 2010. It is classified under Moderate severity, with a current status of Active. The recalling firm is not specified in the federal record. Federal records list the affected scope as About 108,000.

The documented reason for this recall is: The power cord is not properly routed or securely seated in the cord rewind assembly allowing the power cord to be pulled loose. This poses fire and shock hazards. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Consumers should immediately stop using the recalled vacuum cleaners and contact Hoover for a free repair. - consumers holding this product should act on that instruction rather than relying on general guidance.

Within the same product category the archive holds 6 closely related recalls, 6 from CPSC - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.

Household Products recalls over time

Where this recall sits in its category - 3,056 household products recalls on record

50100150200250 20052008201120142017202020232026 115
Severity2487872426High severity (most serious)Moderate severityLow severity
Where this recall sits in the database

Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.

Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.

Severity

Moderate

Affected scope

About 108,000

Related Recalls

6

6 from same agency

Product description

This recall involves Hoover® WindTunnel T-Series™ Bagless Upright vacuum cleaners with the cord rewind feature. This feature enables the cord to wind inside the vacuum for storage. The following model numbers and manufacturing codes are included in the recall. Model Numbers UH70110 UH70120 UH70200 UH70205 UH70210 Manufacturing code ends with H09A I09A J09A K09A. Vacuums with the manufacturing code K09A followed by a green dot are not included in this recall. Vacuum cleaners with the cord rewind feature sold after November 2009 and with any other manufacturing code are not included in this recall. The model number and manufacturing code can be found on a label on the lower rear part of the vacuum cleaner.

Reason for recall

The power cord is not properly routed or securely seated in the cord rewind assembly allowing the power cord to be pulled loose. This poses fire and shock hazards.

Remedy, what to do

Consumers should immediately stop using the recalled vacuum cleaners and contact Hoover for a free repair.

Recall Profile

Structured summary of the CPSC recall record
Attribute Value
Agency U.S. Consumer Product Safety Commission
Severity class Moderate
Status Active
Recall number 10248
Date reported May 27, 2010
Date initiated May 27, 2010
Recalling firm Not disclosed
Affected scope About 108,000
Distribution Not disclosed
Official source CPSC notice →

Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.

What to do with this recall

Consumers should immediately stop using the recalled vacuum cleaners and contact Hoover for a free repair.

  • Check the recall number (10248) and product description against the item you own. Search the archive
  • Confirm the current status and remedy on the official CPSC notice before acting. CPSC notice
  • Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next

This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.

Frequently Asked Questions

What product was recalled?
This recall involves Hoover® WindTunnel T-Series™ Bagless Upright vacuum cleaners with the cord rewind feature. This feature enables the cord to wind inside the vacuum for storage. The following model numbers and manufacturing codes are included in the recall. Model Numbers UH70110 UH70120 UH70200 UH70205 UH70210 Manufacturing code ends with H09A I09A J09A K09A. Vacuums with the manufacturing code K09A followed by a green dot are not included in this recall. Vacuum cleaners with the cord rewind feature sold after November 2009 and with any other manufacturing code are not included in this recall. The model number and manufacturing code can be found on a label on the lower rear part of the vacuum cleaner.. Units affected: About 108,000.
Why was this product recalled?
The power cord is not properly routed or securely seated in the cord rewind assembly allowing the power cord to be pulled loose. This poses fire and shock hazards.
What should consumers do?
Consumers should immediately stop using the recalled vacuum cleaners and contact Hoover for a free repair.
Which agency issued this recall?
This recall was issued by the CPSC on May 27, 2010. Severity: Moderate. Recall number: 10248.
How do I check if my product is affected by a recall?
Check the product description and recall number (10248) against your product. Visit the official CPSC website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product?
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.

Nearby Recalls in This Category

Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.

Compare this recall with Cooper Lighting Recalls Metalux Optimized High Bay LED Ligh… →

Browse all Household Products recalls →

Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: CPSC, reported May 27, 2010. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.