The Hive Announces Recall to Repair Revl Carbon Road Bicycle Brakes Due to Fall Hazard

The cable clamping area of the bicycle brakes can crack over time, causing the brakes to fail. This could pose a fall or crash hazard to the cyclist.

Recall #: 11010
Affected scope: About 500

Compiled from official public sources by the publisher. · Updated September 2026

Verify with CPSC →

View my saved recalls

The CPSC recalled The recall involves black Revl carbon road bicycle brakes with date codes 41B, 44B, 45B, ….

The Hive Announces Recall to Repair Revl Carbon Road Bicycle Brakes Due to Fall Hazard was recalled and listed by the CPSC in October 14, 2010. Reason: The cable clamping area of the bicycle brakes can crack over time, causing the brakes to fail. This could pos…. Remedy: Consumers should stop using their bicycles with these recalled brakes and contact The Hiv…. Verify recall #11010 with the CPSC before acting.

The recall

issued this CPSC recall-The cable clamping area of the bicycle brakes can crack over time, causing the brakes to fail. This could pos….

None
agency class: October 14, 2010
reported

Sourced from official CPSC enforcement records. Verify recall #11010 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.

Recall Insight

This recall's affected scope, documented in the Recall Profile below, stays within a single-region or limited-distribution footprint. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. Consumers holding this product should act on the agency's documented remedy above rather than relying on general guidance.

Within the same product category the archive holds 6 closely related recalls, 3 from CPSC - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.

Product description

The recall involves black Revl carbon road bicycle brakes with date codes 41B, 44B, 45B, 53B, 13C and 16C printed on the underside of the carbon brake arms. "Revl" is printed on the brake.

Reason for recall

The cable clamping area of the bicycle brakes can crack over time, causing the brakes to fail. This could pose a fall or crash hazard to the cyclist.

Remedy, what to do

Consumers should stop using their bicycles with these recalled brakes and contact The Hive for replacement parts and instruction to repair their brakes or contact their retailer to perform the repair free of charge.

Recall Profile

Structured summary of the CPSC recall record
Attribute	Value
Agency	U.S. Consumer Product Safety Commission
Severity class	Not classified by agency
Status	Active
Recall number	11010
Date reported	October 14, 2010
Date initiated	October 14, 2010
Recalling firm	Not disclosed
Affected scope	About 500
Distribution	Not disclosed
Official source	CPSC notice →

Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.

What to do with this recall

Consumers should stop using their bicycles with these recalled brakes and contact The Hive for replacement parts and instruction …

Check the recall number (11010) and product description against the item you own. Search the archive
Confirm the current status and remedy on the official CPSC notice before acting. CPSC notice
Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next

This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.

Frequently Asked Questions

What product was recalled? ▼

The recall involves black Revl carbon road bicycle brakes with date codes 41B, 44B, 45B, 53B, 13C and 16C printed on the underside of the carbon brake arms. "Revl" is printed on the brake.. Units affected: About 500.

Why was this product recalled? ▼

The cable clamping area of the bicycle brakes can crack over time, causing the brakes to fail. This could pose a fall or crash hazard to the cyclist.

What should consumers do? ▼

Which agency issued this recall? ▼

This recall was issued by the CPSC on October 14, 2010. CPSC does not publish a hazard classification for this recall. Recall number: 11010.

How do I report an injury from a recalled product? ▼

Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.

Nationwide recalls with similar severity or category timing

Consumer-product notices outside this firm and state, matched by severity timing and product category.

Similar severity · nearest report date

Same archive severity grade, closest by report date among other firms and states.

Ryobi Recalls Cordless Drills Due to Fire… 2010-10-14 Additional Injuries Prompt JAKKS Pacific … 2010-10-15 Briggs & Stratton Recalls Riding Mowers D… 2010-10-15 Iron Lover's Bench Sold Exclusively at Ro… 2010-10-13

Similar Vehicles · nearest report date

Same product category, closest by report date among other firms and states (deduped against the severity set).

CHEVROLET 2009-2010: SEAT BELTS:FRONT:ANC… 2010-10-13 VOLVO 2010-2011: AIR BAGS:FRONTAL 2010-10-13 VOLVO 2008-2011: EQUIPMENT:OTHER:LABELS 2010-10-12 BMW 2009-2010: SERVICE BRAKES, HYDRAULIC:… 2010-10-18

Compare this recall with KTM North America Recalls Off-Road Motorcycles Due to Risk … → · All Vehicles recalls

This recall: CPSC, reported October 14, 2010. Severity classes follow each agency's own taxonomy; related-recall context is computed across the full archive.

Methodology · Corrections · Archive as of August 2026