PlainRecalls

Baby Jogger LLC Recalls Baby Jogger Jump Seats Due to Fall Hazard

Reported: March 1, 2011 Initiated: March 1, 2011 #11145 About 1,545 (U.S.) and about 450 (Canada) units

Baby Jogger LLC, of Richmond, Va. issued this CPSC recall on March 1, 2011. Classified as Moderate severity. Approximately About 1,545 (U.S.) and about 450 (Canada) units are affected. The recall was issued because: If the Jump Seat does not properly lock into place, the Jump Seat could disengage from the stroller allowing the child …. This recall notice is sourced from official CPSC enforcement records. Below you will find the complete product description, hazard information, remedy instructions, and related recalls from the same manufacturer or product category.

Recall Insight

This CPSC action (record #11145) was formally reported on March 1, 2011. It is classified under Moderate severity, with a current status of Active. Baby Jogger LLC, of Richmond, Va. is listed as the recalling firm. Federal records indicate About 1,545 (U.S.) and about 450 (Canada) units are affected, placing this recall in the million-unit bracket that typically triggers nationwide consumer alerts and retailer sweeps.

The documented reason for this recall is: If the Jump Seat does not properly lock into place, the Jump Seat could disengage from the stroller allowing the child to fall out. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Consumers should immediately stop using the Jump Seat and contact Baby Jogger to receive Jump Seat safety straps and assembly instructions. — consumers holding this product should act on that instruction rather than relying on general guidance.

To put this record in context, PlainRecalls indexes 83,949 recalls across the FDA, CPSC, NHTSA and USDA FSIS going back to 1995. Within the same product category, the database holds 6 closely related recalls, of which 6 were also issued by CPSC. That clustering is a signal — repeated actions in a narrow category often indicate a systemic quality-control issue, a supplier-wide contamination, or a design defect that has propagated across product lines. This recall is roughly 15 years old; older recalls can remain relevant because many units enter resale, rental, and secondary-market channels where the original warning never reaches the end user. Always cross-check the recall number against the official agency page before relying on any summary.

Recall Distribution by Severity Class

Severity1Class I (Critical)Class II (Moderate)Class III (Low)
Recall Distribution by Severity Class

Severity

Moderate

Units Affected

About 1,545 (U.S.) and about 450 (Canada)

Related Recalls

6

6 from same agency

Product Description

This recall includes the Baby Jogger Jump Seat. The Jump Seat is a fabric seat accessory with the name "Baby Jogger" on the front that is attached to the mounting bracket on the frame of a Baby Jogger City Elite, Baby Jogger City Classic or Baby Jogger Summit stroller and allows a toddler and baby to ride together in the same stroller at the same time. The item number is printed on the product packaging. Item Number Sold J7J50 Beginning January 2008

Reason for Recall

If the Jump Seat does not properly lock into place, the Jump Seat could disengage from the stroller allowing the child to fall out.

Remedy

Consumers should immediately stop using the Jump Seat and contact Baby Jogger to receive Jump Seat safety straps and assembly instructions.

Details

Units Affected
About 1,545 (U.S.) and about 450 (Canada)

Recall Profile

Structured summary of the CPSC recall record
Attribute Value
Agency U.S. Consumer Product Safety Commission
Severity class Moderate
Status Active
Recall number 11145
Date reported March 1, 2011
Date initiated March 1, 2011
Recalling firm Baby Jogger LLC, of Richmond, Va.
Units affected About 1,545 (U.S.) and about 450 (Canada)
Distribution Not disclosed

Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.

Scale of Impact

About 1,545 (U.S.) and about 450 (Canada) units affected — million-unit bracket.

Regional (<10K units)
Multi-state (10K – 100K units)
Large-scale (100K – 1M units)
Massive (≥1M units) ✓ This recall

Bracket cutoffs follow federal recall-disclosure conventions; bar widths scale linearly within each bracket. Source: PlainRecalls analysis of U.S. Consumer Product Safety Commission filings.

Frequently Asked Questions

What product was recalled?
This recall includes the Baby Jogger Jump Seat. The Jump Seat is a fabric seat accessory with the name "Baby Jogger" on the front that is attached to the mounting bracket on the frame of a Baby Jogger City Elite, Baby Jogger City Classic or Baby Jogger Summit stroller and allows a toddler and baby to ride together in the same stroller at the same time. The item number is printed on the product packaging. Item Number Sold J7J50 Beginning January 2008. Recalled by Baby Jogger LLC, of Richmond, Va.. Units affected: About 1,545 (U.S.) and about 450 (Canada).
Why was this product recalled?
If the Jump Seat does not properly lock into place, the Jump Seat could disengage from the stroller allowing the child to fall out.
What should consumers do?
Consumers should immediately stop using the Jump Seat and contact Baby Jogger to receive Jump Seat safety straps and assembly instructions.
Which agency issued this recall?
This recall was issued by the CPSC on March 1, 2011. Severity: Moderate. Recall number: 11145.
How do I check if my product is affected by a recall?
Check the product description and recall number (11145) against your product. Visit the official CPSC website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product?
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.

Recall Context

Product recalls are issued when a manufacturer, distributor, or federal agency determines that a product poses a safety risk to consumers. This recall is classified as moderate severity, indicating the product may cause temporary or medically reversible health consequences. Across PlainRecalls, we track 83,000+ recalls from FDA, CPSC, and NHTSA to help consumers stay informed and act quickly when safety issues arise.

Nearby Recalls in This Category

Other recalls in the same product category — useful for spotting patterns across the same defect class or manufacturer.

Compare this recall with Infant Walkers Recalled Due to Risk of Serious Injury or De… →

Data Sources

Data as of 2025. Source: FDA, CPSC, NHTSA, USDA FSIS federal recall databases.

  • Source: FDA — Food and Drug Administration, openFDA Enforcement API (food, drug, and medical device recalls)
  • Source: CPSC — Consumer Product Safety Commission Recalls API (consumer product recalls and hazards)
  • Source: NHTSA — National Highway Traffic Safety Administration Recalls API (vehicle safety recalls)
  • Source: USDA FSIS — Food Safety and Inspection Service (meat, poultry, and egg product recalls)

Recall information is sourced from official federal agency databases. Always verify recall details with the issuing agency for the most current status. This information is for research and awareness purposes only.

All federal data sources used on this page

Source: Federal recall agencies (FDA, CPSC, NHTSA, USDA FSIS) Aggregated multi-agency recall feeds · 2024 Recall data normalized across federal agency feeds; severity classifications follow each agency's own taxonomy (FDA Class I/II/III; CPSC, NHTSA, USDA FSIS).