Severity
Moderate
ModerateActive
CPSC recall · Reported March 9, 2011
Global Industrial Recalls Workbench Components Due To Electrical Shock Hazard
Misrouted wiring in the electrical outlets on the workbench risers, aprons and shelves, and reverse polarity in some workbench power cords pose an electric shock hazard.
Compiled from official public sources by the editorial team.
Verify with CPSC →
Global Equipment Company, of Port Washington, N.y., dba Global Industrial recalled This recall affects all workbenches with the following components: - The Power Riser is m… - a moderate-severity action.
Global Industrial Recalls Workbench Components Due To Electrical Shock Hazard was recalled by Global Equipment Company, of Port Washington, N.y., dba Global Industrial in March 9, 2011. Reason: Misrouted wiring in the electrical outlets on the workbench risers, aprons and shelves, and reverse polarity …. Remedy: Consumers should immediately unplug their workbench power cords and stop using the electr…. Verify recall #11724 with the CPSC before acting.
The recall
Global Equipment Company, of Port Washington, N.y., dba Global Industrial issued this moderate-severity CPSC recall-Misrouted wiring in the electrical outlets on the workbench risers, aprons and shelves, and reverse polarity ….
- Moderate
- severity level
- March 9, 2011
- reported
Sourced from official CPSC enforcement records. Verify recall #11724 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.
Recall Insight
This CPSC action (record #11724) was formally reported on March 9, 2011. It is classified under Moderate severity, with a current status of Active. Global Equipment Company, of Port Washington, N.y., dba Global Industrial is listed as the recalling firm. Federal records list the affected scope as About 5,000.
The documented reason for this recall is: Misrouted wiring in the electrical outlets on the workbench risers, aprons and shelves, and reverse polarity in some workbench power cords pose an electric shock hazard. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Consumers should immediately unplug their workbench power cords and stop using the electrical outlets on the workbenches. Additionally, they should remove the power cord from the workbench. Global is… - consumers holding this product should act on that instruction rather than relying on general guidance.
Within the same product category the archive holds 6 closely related recalls, 6 from CPSC - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.
Household Products recalls over time
Where this recall sits in its category - 3,056 household products recalls on record
Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.
Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.
Affected scope
About 5,000
Related Recalls
6
6 from same agency
Product description
This recall affects all workbenches with the following components: - The Power Riser is made of steel, has an 18-inch shelf with four duplex receptacles and an on/off switch mounted along the front. It comes in gray only and in lengths of 60, 72 and 96 inches. The riser attaches to the top of the bench. - The Power Apron is made of steel, has three duplex receptacles and an on/off switch mounted in one of the long cross beams. It comes in blue or tan and in lengths of 48, 60, 72 and 96 inches. - The Power Shelf is made of steel, has three duplex receptacles and an on/off switch mounted on the front. It comes in blue or tan and in lengths of 48, 60, 72 and 96 inches. It attaches to a pair of 48-inch uprights.
Reason for recall
Misrouted wiring in the electrical outlets on the workbench risers, aprons and shelves, and reverse polarity in some workbench power cords pose an electric shock hazard.
Remedy, what to do
Consumers should immediately unplug their workbench power cords and stop using the electrical outlets on the workbenches. Additionally, they should remove the power cord from the workbench. Global is contacting its customers directly and either sending replacement risers, aprons and shelves with properly wired outlets and replacement power cords or sending technicians on-site to repair faulty wiring and replace faulty power cords.
Recall Profile
| Attribute | Value |
|---|---|
| Agency | U.S. Consumer Product Safety Commission |
| Severity class | Moderate |
| Status | Active |
| Recall number | 11724 |
| Date reported | March 9, 2011 |
| Date initiated | March 9, 2011 |
| Recalling firm | Global Equipment Company, of Port Washington, N.y., dba Global Industrial |
| Affected scope | About 5,000 |
| Distribution | Not disclosed |
| Official source | CPSC notice → |
Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.
What to do with this recall
Consumers should immediately unplug their workbench power cords and stop using the electrical outlets on the workbenches. Additio…
- Check the recall number (11724) and product description against the item you own. Search the archive
- Confirm the current status and remedy on the official CPSC notice before acting. CPSC notice
- Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next
This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.
Frequently Asked Questions
What product was recalled? ▼
This recall affects all workbenches with the following components: - The Power Riser is made of steel, has an 18-inch shelf with four duplex receptacles and an on/off switch mounted along the front. It comes in gray only and in lengths of 60, 72 and 96 inches. The riser attaches to the top of the bench. - The Power Apron is made of steel, has three duplex receptacles and an on/off switch mounted in one of the long cross beams. It comes in blue or tan and in lengths of 48, 60, 72 and 96 inches. - The Power Shelf is made of steel, has three duplex receptacles and an on/off switch mounted on the front. It comes in blue or tan and in lengths of 48, 60, 72 and 96 inches. It attaches to a pair of 48-inch uprights.. Recalled by Global Equipment Company, of Port Washington, N.y., dba Global Industrial. Units affected: About 5,000.
Why was this product recalled? ▼
Misrouted wiring in the electrical outlets on the workbench risers, aprons and shelves, and reverse polarity in some workbench power cords pose an electric shock hazard.
What should consumers do? ▼
Consumers should immediately unplug their workbench power cords and stop using the electrical outlets on the workbenches. Additionally, they should remove the power cord from the workbench. Global is contacting its customers directly and either sending replacement risers, aprons and shelves with properly wired outlets and replacement power cords or sending technicians on-site to repair faulty wiring and replace faulty power cords.
Which agency issued this recall? ▼
This recall was issued by the CPSC on March 9, 2011. Severity: Moderate. Recall number: 11724.
How do I check if my product is affected by a recall? ▼
Check the product description and recall number (11724) against your product. Visit the official CPSC website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product? ▼
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.
Nearby Recalls in This Category
Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.
CPSC Moderate
Cooper Lighting Recalls Metalux Optimized High Bay LED Light Fixtures Due to Fire Hazard
Cooper Lighting, LLC, of Peachtree City, Georgia · 2026-07-02
CPSC Moderate
Winco Fireworks International Recalls Roman Candles 8 Shot Fireworks Due to Risk of Serious Injury from Explosion and B…
· 2026-07-02
CPSC Moderate
Winco Fireworks International Recalls Unity 7 Shot 200 Gram Aerial Cake Fireworks Due to Risk of Serious Injury from Ex…
· 2026-07-02
CPSC Moderate
Kith Retail Recalls Children's Loungewear Sets Due to Risk of Serious Injury from Burn Hazard; Violate Mandatory Standa…
· 2026-06-25
CPSC Moderate
Southern Telecom Expands Recall of Lomi Waxing Kits Due to Risk of Serious Injury or Death from Fire and Burn Hazards; …
· 2026-06-25
Compare this recall with Cooper Lighting Recalls Metalux Optimized High Bay LED Ligh… →
Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: CPSC, reported March 9, 2011. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.