PlainRecalls
ModerateActive

CPSC recall · Reported February 23, 2012

Gas Cylinders Recalled by Worthington Cylinders Wisconsin Due to Fire Hazard

The seal on the cylinders can leak after torches or other fuel consuming equipment are disconnected from them, posing a fire hazard.

Recall #
12117
Affected scope
29,026,000 units in the U.S.; 1,371,100 units in Canada
Verify with CPSC →
View my saved recalls

Worthington Cylinders Wisconsin, LLC, of Chilton, Wis. recalled The cylinders contain propylene gas and are used for soldering, brazing, cutting and weld… - a moderate-severity action.

Gas Cylinders Recalled by Worthington Cylinders Wisconsin Due to Fire Hazard was recalled by Worthington Cylinders Wisconsin, LLC, of Chilton, Wis. in February 23, 2012. Reason: The seal on the cylinders can leak after torches or other fuel consuming equipment are disconnected from them…. Remedy: Unused cylinders: If the cylinder has never been connected to a torch or other device, do…. Verify recall #12117 with the CPSC before acting.

The recall

Worthington Cylinders Wisconsin, LLC, of Chilton, Wis. issued this moderate-severity CPSC recall-The seal on the cylinders can leak after torches or other fuel consuming equipment are disconnected from them….

Moderate
severity level
29.0M units
affected scope
February 23, 2012
reported

Sourced from official CPSC enforcement records. Verify recall #12117 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.

Recall Insight

This CPSC action (record #12117) was formally reported on February 23, 2012. It is classified under Moderate severity, with a current status of Active. Worthington Cylinders Wisconsin, LLC, of Chilton, Wis. is listed as the recalling firm. Federal records list the affected scope as 29,026,000 units in the U.S.; 1,371,100 units in Canada, placing this recall in the million-unit bracket that typically triggers nationwide consumer alerts and retailer sweeps.

The documented reason for this recall is: The seal on the cylinders can leak after torches or other fuel consuming equipment are disconnected from them, posing a fire hazard. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Unused cylinders: If the cylinder has never been connected to a torch or other device, do not use cylinder. Return cylinder to store where it was purchased for exchange or full refund. Partially-used… - consumers holding this product should act on that instruction rather than relying on general guidance.

Within the same product category the archive holds 6 closely related recalls, 6 from CPSC - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.

Household Products recalls over time

Where this recall sits in its category - 3,056 household products recalls on record

50100150200250 20052008201120142017202020232026 115
Severity2487872426High severity (most serious)Moderate severityLow severity
Where this recall sits in the database

Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.

Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.

Severity

Moderate

Affected scope

29,026,000 units in the U.S.; 1,371,100 units in Canada

Related Recalls

6

6 from same agency

Product description

The cylinders contain propylene gas and are used for soldering, brazing, cutting and welding. They contain 14.1 oz Map-Pro, 14.1 oz Propylene or 16 oz MAPP (Methyl Acetylene Propadiene Stabilized). The cylinders are approximately 3" in diameter and 11" tall and are either yellow or black in color. They were sold alone and in kits that include a torch and a cylinder. The cylinders and torch kits have a variety of labels, including: ACE ASCO BENCHMARK® BERNZOMATIC® CRAFTSMAN® EMC EXPRESS Firepower® GENTEC® GOSS® HOTERY Jones Stephens Corp LENOX® Mag-Torch® MAGNA® Mastercraft® and TURNER® Master Mechanic® MAPP NAPA BERNZOMATIC® PREST-O-LITE® RONA ROTHENBERGER SUPER-EGO SureFire™ TurboTorch® UNIWELD® WORTHINGTON MAPP® GAS WORTHINGTON MAP/Pro™ WORTHINGTON PROPYLENE

Reason for recall

The seal on the cylinders can leak after torches or other fuel consuming equipment are disconnected from them, posing a fire hazard.

Remedy, what to do

Unused cylinders: If the cylinder has never been connected to a torch or other device, do not use cylinder. Return cylinder to store where it was purchased for exchange or full refund. Partially-used cylinder currently connected to torch or other device:Do not disconnect torch or other device. Take outdoors and ignite the torch and burn off entire contents* of the cylinder. Disconnect the torch from empty cylinder and dispose of empty cylinder per cylinder label instructions or return it to store where it was purchased for exchange or a full refund. Partially-used cylinder NOT connected to a torch or other device now: Take cylinder outdoors. Leak test top of the cylinder with soapy water. If bubbles develop, attach the torch. Ignite the torch and burn off entire contents* of the cylinder. Remove the torch from empty cylinder and dispose of empty cylinder per cylinder label instructions or return it to the store where it was purchased for exchange or a full refund. If no bubbles develop, do not use cylinder. Return it to the store where it was purchased for exchange or a full refund. *NEVER LEAVE LIT TORCH AND CYLINDER UNATTENDED. USE TORCH ONLY IN A WELL-VENTILATED AREA.

Recall Profile

Structured summary of the CPSC recall record
Attribute Value
Agency U.S. Consumer Product Safety Commission
Severity class Moderate
Status Active
Recall number 12117
Date reported February 23, 2012
Date initiated February 23, 2012
Recalling firm Worthington Cylinders Wisconsin, LLC, of Chilton, Wis.
Affected scope 29,026,000 units in the U.S.; 1,371,100 units in Canada
Distribution Not disclosed
Official source CPSC notice →

Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.

Scale of Impact

29,026,000 units in the U.S.; 1,371,100 units in Canada units affected - million-unit bracket.

Regional (<10K units) -
Multi-state (10K – 100K units) -
Large-scale (100K – 1M units) -
Massive (≥1M units) ✓ This recall

Bracket cutoffs follow federal recall-disclosure conventions; bar widths scale linearly within each bracket. Source: PlainRecalls analysis of U.S. Consumer Product Safety Commission filings.

What to do with this recall

Unused cylinders: If the cylinder has never been connected to a torch or other device, do not use cylinder. Return cylinder to st…

  • Check the recall number (12117) and product description against the item you own. Search the archive
  • Confirm the current status and remedy on the official CPSC notice before acting. CPSC notice
  • Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next

This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.

Frequently Asked Questions

What product was recalled?
The cylinders contain propylene gas and are used for soldering, brazing, cutting and welding. They contain 14.1 oz Map-Pro, 14.1 oz Propylene or 16 oz MAPP (Methyl Acetylene Propadiene Stabilized). The cylinders are approximately 3" in diameter and 11" tall and are either yellow or black in color. They were sold alone and in kits that include a torch and a cylinder. The cylinders and torch kits have a variety of labels, including: ACE ASCO BENCHMARK® BERNZOMATIC® CRAFTSMAN® EMC EXPRESS Firepower® GENTEC® GOSS® HOTERY Jones Stephens Corp LENOX® Mag-Torch® MAGNA® Mastercraft® and TURNER® Master Mechanic® MAPP NAPA BERNZOMATIC® PREST-O-LITE® RONA ROTHENBERGER SUPER-EGO SureFire™ TurboTorch® UNIWELD® WORTHINGTON MAPP® GAS WORTHINGTON MAP/Pro™ WORTHINGTON PROPYLENE. Recalled by Worthington Cylinders Wisconsin, LLC, of Chilton, Wis.. Units affected: 29,026,000 units in the U.S.; 1,371,100 units in Canada.
Why was this product recalled?
The seal on the cylinders can leak after torches or other fuel consuming equipment are disconnected from them, posing a fire hazard.
What should consumers do?
Unused cylinders: If the cylinder has never been connected to a torch or other device, do not use cylinder. Return cylinder to store where it was purchased for exchange or full refund. Partially-used cylinder currently connected to torch or other device:Do not disconnect torch or other device. Take outdoors and ignite the torch and burn off entire contents* of the cylinder. Disconnect the torch from empty cylinder and dispose of empty cylinder per cylinder label instructions or return it to store where it was purchased for exchange or a full refund. Partially-used cylinder NOT connected to a torch or other device now: Take cylinder outdoors. Leak test top of the cylinder with soapy water. If bubbles develop, attach the torch. Ignite the torch and burn off entire contents* of the cylinder. Remove the torch from empty cylinder and dispose of empty cylinder per cylinder label instructions or return it to the store where it was purchased for exchange or a full refund. If no bubbles develop, do not use cylinder. Return it to the store where it was purchased for exchange or a full refund. *NEVER LEAVE LIT TORCH AND CYLINDER UNATTENDED. USE TORCH ONLY IN A WELL-VENTILATED AREA.
Which agency issued this recall?
This recall was issued by the CPSC on February 23, 2012. Severity: Moderate. Recall number: 12117.
How do I check if my product is affected by a recall?
Check the product description and recall number (12117) against your product. Visit the official CPSC website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product?
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.

Nearby Recalls in This Category

Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.

Compare this recall with Cooper Lighting Recalls Metalux Optimized High Bay LED Ligh… →

Browse all Household Products recalls →

Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: CPSC, reported February 23, 2012. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.