PlainRecalls
No agency classActive

CPSC recall · Reported August 30, 2012

Shimano Recalls to Repair PRO VIBE Bicycle Handlebars Due to a Fall Hazard

The recalled handlebars can break during riding, posing a fall hazard.

Recall #
12264
Affected scope
About 67
Verify with CPSC →
View my saved recalls

Great Go Cycles Inc., of Taiwan recalled The recalled bicycle handlebars, intended for high-end road racing bikes, are compact and….

Shimano Recalls to Repair PRO VIBE Bicycle Handlebars Due to a Fall Hazard was recalled by Great Go Cycles Inc., of Taiwan in August 30, 2012. Reason: The recalled handlebars can break during riding, posing a fall hazard.. Remedy: Consumers should immediately stop using bicycles with the recalled handlebars and contact…. Verify recall #12264 with the CPSC before acting.

The recall

Great Go Cycles Inc., of Taiwan issued this CPSC recall-The recalled handlebars can break during riding, posing a fall hazard..

None
agency class
August 30, 2012
reported

Sourced from official CPSC enforcement records. Verify recall #12264 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.

Recall Insight

This recall's affected scope, documented in the Recall Profile below, stays within a single-region or limited-distribution footprint. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. Consumers holding this product should act on the agency's documented remedy above rather than relying on general guidance.

Within the same product category the archive holds 6 closely related recalls, 6 from CPSC - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.

Outdoor & Sports recalls over time

Where this recall sits in its category - 515 outdoor & sports recalls on record

101520253035 20052008201120142017202020232026 32

Product description

The recalled bicycle handlebars, intended for high-end road racing bikes, are compact and drop-shaped . The handlebars are sold separately and they have two labels with "Pro Vibe" logo directly printed on them. The model number appears on the bar code sticker on the packaging and serial numbers are printed on a label inside the tube of the handlebar. The recalled model numbers are: PRHA0099, PRHA0102, PRHA0103, PRHA0105 and PRHA0106. The affected serial codes are: JE028ZG, JE101ZG, JE106ZG, JF081ZG, JF102ZG, JG048ZG, JH006ZG and JH077ZG.

Reason for recall

The recalled handlebars can break during riding, posing a fall hazard.

Remedy, what to do

Consumers should immediately stop using bicycles with the recalled handlebars and contact Shimano for information about obtaining a free replacement from an authorized retailer in their area.

Recall Profile

Structured summary of the CPSC recall record
Attribute Value
Agency U.S. Consumer Product Safety Commission
Severity class Not classified by agency
Status Active
Recall number 12264
Date reported August 30, 2012
Date initiated August 30, 2012
Recalling firm Great Go Cycles Inc., of Taiwan
Affected scope About 67
Distribution Not disclosed
Official source CPSC notice →

Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.

What to do with this recall

Consumers should immediately stop using bicycles with the recalled handlebars and contact Shimano for information about obtaining…

  • Check the recall number (12264) and product description against the item you own. Search the archive
  • Confirm the current status and remedy on the official CPSC notice before acting. CPSC notice
  • Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next

This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.

Frequently Asked Questions

What product was recalled?
The recalled bicycle handlebars, intended for high-end road racing bikes, are compact and drop-shaped . The handlebars are sold separately and they have two labels with "Pro Vibe" logo directly printed on them. The model number appears on the bar code sticker on the packaging and serial numbers are printed on a label inside the tube of the handlebar. The recalled model numbers are: PRHA0099, PRHA0102, PRHA0103, PRHA0105 and PRHA0106. The affected serial codes are: JE028ZG, JE101ZG, JE106ZG, JF081ZG, JF102ZG, JG048ZG, JH006ZG and JH077ZG.. Recalled by Great Go Cycles Inc., of Taiwan. Units affected: About 67.
Why was this product recalled?
The recalled handlebars can break during riding, posing a fall hazard.
What should consumers do?
Consumers should immediately stop using bicycles with the recalled handlebars and contact Shimano for information about obtaining a free replacement from an authorized retailer in their area.
Which agency issued this recall?
This recall was issued by the CPSC on August 30, 2012. CPSC does not publish a hazard classification for this recall. Recall number: 12264.
How do I report an injury from a recalled product?
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.

Nationwide recalls with similar severity or category timing

Consumer-product notices outside this firm and state, matched by severity timing and product category.

Compare this recall with Southern Telecom Recalls Brookstone-Branded Tabletop Fire P… → · All Outdoor & Sports recalls

This recall: CPSC, reported August 30, 2012. Severity classes follow each agency's own taxonomy; related-recall context is computed across the full archive.

Methodology · Corrections · Archive as of August 2026