PlainRecalls
ModerateActive

CPSC recall · Reported April 10, 2013

Battenfeld Technologies Recalls Three-Digit Combination Locking Handgun Vaults Due to Lock Malfunction

The lock can fail and allow unintended access to the contents of the vault.

Recall #
13165
Affected scope
About 3,900 in the U.S. and about 100 in Canada
Verify with CPSC →
View my saved recalls

The CPSC recalled This recall is for combination lock models of Lockdown® Compact and Large handgun securit… — a moderate-severity action.

Battenfeld Technologies Recalls Three-Digit Combination Locking Handgun Vaults Due to Loc… was recalled and listed by the CPSC in April 10, 2013. Reason: The lock can fail and allow unintended access to the contents of the vault.. Remedy: Consumers should immediately stop using the recalled handgun vaults and contact Battenfel…. Verify recall #13165 with the CPSC before acting.

The recall

issued this moderate-severity CPSC recall — The lock can fail and allow unintended access to the contents of the vault..

Moderate
severity level
April 10, 2013
reported

Sourced from official CPSC enforcement records. Verify recall #13165 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.

Recall Insight

This CPSC action (record #13165) was formally reported on April 10, 2013. It is classified under Moderate severity, with a current status of Active. The recalling firm is not specified in the federal record. Federal records list the affected scope as About 3,900 in the U.S. and about 100 in Canada.

The documented reason for this recall is: The lock can fail and allow unintended access to the contents of the vault. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Consumers should immediately stop using the recalled handgun vaults and contact Battenfeld Technologies to return the vault for a full refund. — consumers holding this product should act on that instruction rather than relying on general guidance.

Within the same product category the archive holds 6 closely related recalls — clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.

Vehicles recalls over time

Where this recall sits in its category — 9,301 vehicles recalls on record

02004006008001,000 20052008201120142017202020232026 109

Where this recall sits in the database

Severity2366872097High severity (most serious)Moderate severityLow severity
Where this recall sits in the database

Of 100,165 recalls in the database, 23,668 are high severity, 72,097 moderate, and 4,400 low. This recall is classified moderate severity.

Counts reflect market size and reporting activity, not inherent danger — we do not rank products by risk from raw recall volume.

Severity

Moderate

Affected scope

About 3,900 in the U.S. and about 100 in Canada

Related Recalls

6

0 from same agency

Product description

This recall is for combination lock models of Lockdown® Compact and Large handgun security vaults. The vaults are black, steel cases used to store handguns or other valuables at home, in the car or when traveling. The Compact vault's interior is 5.25 inches wide, 8.25 long and 1.5 inches deep and can store most compact automatics and revolvers. The Large vault's interior is 6.125 inches wide, 9.75 inches long and 1.5 inches deep and can store most full-sized automatics and revolvers with barrels up to 4 inches long. The vaults are lined with foam padding in the top and bottom and are secured by a three-digit combination lock. A label with the words "Lockdown" and "www.lockdownvaults.com" is located to the left of the combination lock. The serial number is located on a paper label on the inside surface of the vault bottom under the foam. Recalled Compact and Large vaults have serial numbers from ST120002600 to ST120006800.

Reason for recall

The lock can fail and allow unintended access to the contents of the vault.

Remedy — what to do

Consumers should immediately stop using the recalled handgun vaults and contact Battenfeld Technologies to return the vault for a full refund.

Recall Profile

Structured summary of the CPSC recall record
Attribute Value
Agency U.S. Consumer Product Safety Commission
Severity class Moderate
Status Active
Recall number 13165
Date reported April 10, 2013
Date initiated April 10, 2013
Recalling firm Not disclosed
Affected scope About 3,900 in the U.S. and about 100 in Canada
Distribution Not disclosed
Official source CPSC notice →

Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.

What to do with this recall

Consumers should immediately stop using the recalled handgun vaults and contact Battenfeld Technologies to return the vault for a…

  • Check the recall number (13165) and product description against the item you own. Search the archive
  • Confirm the current status and remedy on the official CPSC notice before acting. CPSC notice
  • Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next

This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.

Frequently Asked Questions

What product was recalled?
This recall is for combination lock models of Lockdown® Compact and Large handgun security vaults. The vaults are black, steel cases used to store handguns or other valuables at home, in the car or when traveling. The Compact vault's interior is 5.25 inches wide, 8.25 long and 1.5 inches deep and can store most compact automatics and revolvers. The Large vault's interior is 6.125 inches wide, 9.75 inches long and 1.5 inches deep and can store most full-sized automatics and revolvers with barrels up to 4 inches long. The vaults are lined with foam padding in the top and bottom and are secured by a three-digit combination lock. A label with the words "Lockdown" and "www.lockdownvaults.com" is located to the left of the combination lock. The serial number is located on a paper label on the inside surface of the vault bottom under the foam. Recalled Compact and Large vaults have serial numbers from ST120002600 to ST120006800.. Units affected: About 3,900 in the U.S. and about 100 in Canada.
Why was this product recalled?
The lock can fail and allow unintended access to the contents of the vault.
What should consumers do?
Consumers should immediately stop using the recalled handgun vaults and contact Battenfeld Technologies to return the vault for a full refund.
Which agency issued this recall?
This recall was issued by the CPSC on April 10, 2013. Severity: Moderate. Recall number: 13165.
How do I check if my product is affected by a recall?
Check the product description and recall number (13165) against your product. Visit the official CPSC website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product?
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.

Nearby Recalls in This Category

Other recalls in the same product category — useful for spotting patterns across the same defect class or manufacturer.

Compare this recall with Gas-X, Simethicone 125 mg/ ANTIGAS, 120 SoftGels, Distribut… →

Data Sources

Source: FDA, CPSC, and NHTSA federal recall databases. This recall: CPSC, reported April 10, 2013.

  • Source: FDA — Food and Drug Administration, openFDA Enforcement API (food, drug, and medical device recalls)
  • Source: CPSC — Consumer Product Safety Commission Recalls API (consumer product recalls and hazards)
  • Source: NHTSA — National Highway Traffic Safety Administration Recalls API (vehicle safety recalls)

Recall information is sourced from official federal agency databases. Always verify recall details with the issuing agency for the most current status. This information is for research and awareness purposes only.

Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records — no number is typed in by an editor. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of June 2026.