Severity
Moderate
ModerateActive
CPSC recall · Reported August 19, 2015
Grizzly Recalls Table Saws Due to Laceration and Impact Hazards (Recall Alert)
The motor pulley can come loose and hit the table saw blade, causing the blade teeth to break into flying metal fragments, posing a risk of laceration or impact injury to consumer…
The CPSC recalled This recall involves Grizzly 10-inch hybrid table saws with model number G0771 and serial… - a moderate-severity action.
Grizzly Recalls Table Saws Due to Laceration and Impact Hazards (Recall Alert) was recalled and listed by the CPSC in August 19, 2015. Reason: The motor pulley can come loose and hit the table saw blade, causing the blade teeth to break into flying met…. Remedy: Consumers should immediately stop using the recalled table saws and return them to Grizzl…. Verify recall #15748 with the CPSC before acting.
The recall
issued this moderate-severity CPSC recall-The motor pulley can come loose and hit the table saw blade, causing the blade teeth to break into flying met….
- Moderate
- severity level
- August 19, 2015
- reported
Sourced from official CPSC enforcement records. Verify recall #15748 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.
Recall Insight
This CPSC action (record #15748) was formally reported on August 19, 2015. It is classified under Moderate severity, with a current status of Active. The recalling firm is not specified in the federal record. Federal records list the affected scope as About 1,240.
The documented reason for this recall is: The motor pulley can come loose and hit the table saw blade, causing the blade teeth to break into flying metal fragments, posing a risk of laceration or impact injury to consumers. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Consumers should immediately stop using the recalled table saws and return them to Grizzly for a full refund, free repair or a free motor pulley kit that can be installed by the consumer. Grizzly is … - consumers holding this product should act on that instruction rather than relying on general guidance.
Within the same product category the archive holds 6 closely related recalls, 6 from CPSC - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.
Household Products recalls over time
Where this recall sits in its category - 3,056 household products recalls on record
Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.
Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.
Affected scope
About 1,240
Related Recalls
6
6 from same agency
Product description
This recall involves Grizzly 10-inch hybrid table saws with model number G0771 and serial number between TS2014060001 and TS2014111244 or a date code between 06/2014 and 11/2014. The Grizzly logo, "G0771," the serial number and the date code are printed on the side of the table saw's enclosed white metal base. Grizzly.com is printed on a green band on the bottom of the base.
Reason for recall
The motor pulley can come loose and hit the table saw blade, causing the blade teeth to break into flying metal fragments, posing a risk of laceration or impact injury to consumers.
Remedy, what to do
Consumers should immediately stop using the recalled table saws and return them to Grizzly for a full refund, free repair or a free motor pulley kit that can be installed by the consumer. Grizzly is contacting consumers who bought the recalled table saws directly.
Recall Profile
| Attribute | Value |
|---|---|
| Agency | U.S. Consumer Product Safety Commission |
| Severity class | Moderate |
| Status | Active |
| Recall number | 15748 |
| Date reported | August 19, 2015 |
| Date initiated | August 19, 2015 |
| Recalling firm | Not disclosed |
| Affected scope | About 1,240 |
| Distribution | Not disclosed |
| Official source | CPSC notice → |
Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.
What to do with this recall
Consumers should immediately stop using the recalled table saws and return them to Grizzly for a full refund, free repair or a fr…
- Check the recall number (15748) and product description against the item you own. Search the archive
- Confirm the current status and remedy on the official CPSC notice before acting. CPSC notice
- Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next
This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.
Frequently Asked Questions
What product was recalled? ▼
This recall involves Grizzly 10-inch hybrid table saws with model number G0771 and serial number between TS2014060001 and TS2014111244 or a date code between 06/2014 and 11/2014. The Grizzly logo, "G0771," the serial number and the date code are printed on the side of the table saw's enclosed white metal base. Grizzly.com is printed on a green band on the bottom of the base.. Units affected: About 1,240.
Why was this product recalled? ▼
The motor pulley can come loose and hit the table saw blade, causing the blade teeth to break into flying metal fragments, posing a risk of laceration or impact injury to consumers.
What should consumers do? ▼
Consumers should immediately stop using the recalled table saws and return them to Grizzly for a full refund, free repair or a free motor pulley kit that can be installed by the consumer. Grizzly is contacting consumers who bought the recalled table saws directly.
Which agency issued this recall? ▼
This recall was issued by the CPSC on August 19, 2015. Severity: Moderate. Recall number: 15748.
How do I check if my product is affected by a recall? ▼
Check the product description and recall number (15748) against your product. Visit the official CPSC website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product? ▼
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.
Nearby Recalls in This Category
Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.
CPSC Moderate
Cooper Lighting Recalls Metalux Optimized High Bay LED Light Fixtures Due to Fire Hazard
Cooper Lighting, LLC, of Peachtree City, Georgia · 2026-07-02
CPSC Moderate
Winco Fireworks International Recalls Roman Candles 8 Shot Fireworks Due to Risk of Serious Injury from Explosion and B…
· 2026-07-02
CPSC Moderate
Winco Fireworks International Recalls Unity 7 Shot 200 Gram Aerial Cake Fireworks Due to Risk of Serious Injury from Ex…
· 2026-07-02
CPSC Moderate
Kith Retail Recalls Children's Loungewear Sets Due to Risk of Serious Injury from Burn Hazard; Violate Mandatory Standa…
· 2026-06-25
CPSC Moderate
Southern Telecom Expands Recall of Lomi Waxing Kits Due to Risk of Serious Injury or Death from Fire and Burn Hazards; …
· 2026-06-25
Compare this recall with Cooper Lighting Recalls Metalux Optimized High Bay LED Ligh… →
Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: CPSC, reported August 19, 2015. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.