PlainRecalls

Alex Toys Recalls Infant Building Play Sets Due to Choking Hazard

Reported: August 23, 2016 Initiated: August 23, 2016 #16248 About 91,000 units

CPSC recall on August 23, 2016. Classified as Moderate severity. Approximately About 91,000 units are affected. The recall was issued because: Small parts of the plastic toy building sets can detach, posing a choking hazard to young children.. This recall notice is sourced from official CPSC enforcement records. Below you will find the complete product description, hazard information, remedy instructions, and related recalls from the same manufacturer or product category.

Recall Insight

This CPSC action (record #16248) was formally reported on August 23, 2016. It is classified under Moderate severity, with a current status of Active. The recalling firm is not specified in the federal record. Federal records indicate About 91,000 units are affected.

The documented reason for this recall is: Small parts of the plastic toy building sets can detach, posing a choking hazard to young children. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Consumers should immediately take the recalled building sets away from children and contact ALEX for a prepaid shipping envelope to return the product(s). ALEX will send consumers a full refund upon … — consumers holding this product should act on that instruction rather than relying on general guidance.

To put this record in context, PlainRecalls indexes 83,949 recalls across the FDA, CPSC, NHTSA and USDA FSIS going back to 1995. Within the same product category, the database holds 6 closely related recalls. That clustering is a signal — repeated actions in a narrow category often indicate a systemic quality-control issue, a supplier-wide contamination, or a design defect that has propagated across product lines. This recall is roughly 10 years old; older recalls can remain relevant because many units enter resale, rental, and secondary-market channels where the original warning never reaches the end user. Always cross-check the recall number against the official agency page before relying on any summary.

Recall Distribution by Severity Class

Severity1Class I (Critical)Class II (Moderate)Class III (Low)
Recall Distribution by Severity Class

Severity

Moderate

Units Affected

About 91,000

Related Recalls

6

0 from same agency

Product Description

This recall involves three ALEX Jr. branded sets of infant building toys, the Baby Builder, model 1982, First Pops, model 1981P, and the First Snaps, model 1981S produced prior to November 2010. The sets include an assortment of plastic shapes in bright colors. The pieces are designed to be pulled, pushed, snapped and twisted and come in stackable plastic jars. They were sold in sets of 14 and 26 pieces. The recalled First Snaps sets' containers have the following batch codes, on a sticker above the UPC code on the container. P0002073 P0001713 P0001330 P0000954 P0002107 P0001628 P0001009 P00000814 P0001948 P0001536 P0001098 P0001677 P0001427 P0000983

Reason for Recall

Small parts of the plastic toy building sets can detach, posing a choking hazard to young children.

Remedy

Consumers should immediately take the recalled building sets away from children and contact ALEX for a prepaid shipping envelope to return the product(s). ALEX will send consumers a full refund upon receipt of returned sets.

Recall Profile

Structured summary of the CPSC recall record
Attribute Value
Agency U.S. Consumer Product Safety Commission
Severity class Moderate
Status Active
Recall number 16248
Date reported August 23, 2016
Date initiated August 23, 2016
Recalling firm Not disclosed
Units affected About 91,000
Distribution Not disclosed

Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.

Scale of Impact

About 91,000 units affected — limited or regional distribution scale.

Regional (<10K units)
Multi-state (10K – 100K units) ✓ This recall
Large-scale (100K – 1M units)
Massive (≥1M units)

Bracket cutoffs follow federal recall-disclosure conventions; bar widths scale linearly within each bracket. Source: PlainRecalls analysis of U.S. Consumer Product Safety Commission filings.

Frequently Asked Questions

What product was recalled?
This recall involves three ALEX Jr. branded sets of infant building toys, the Baby Builder, model 1982, First Pops, model 1981P, and the First Snaps, model 1981S produced prior to November 2010. The sets include an assortment of plastic shapes in bright colors. The pieces are designed to be pulled, pushed, snapped and twisted and come in stackable plastic jars. They were sold in sets of 14 and 26 pieces. The recalled First Snaps sets' containers have the following batch codes, on a sticker above the UPC code on the container. P0002073 P0001713 P0001330 P0000954 P0002107 P0001628 P0001009 P00000814 P0001948 P0001536 P0001098 P0001677 P0001427 P0000983. Units affected: About 91,000.
Why was this product recalled?
Small parts of the plastic toy building sets can detach, posing a choking hazard to young children.
What should consumers do?
Consumers should immediately take the recalled building sets away from children and contact ALEX for a prepaid shipping envelope to return the product(s). ALEX will send consumers a full refund upon receipt of returned sets.
Which agency issued this recall?
This recall was issued by the CPSC on August 23, 2016. Severity: Moderate. Recall number: 16248.
How do I check if my product is affected by a recall?
Check the product description and recall number (16248) against your product. Visit the official CPSC website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product?
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.

Recall Context

Product recalls are issued when a manufacturer, distributor, or federal agency determines that a product poses a safety risk to consumers. This recall is classified as moderate severity, indicating the product may cause temporary or medically reversible health consequences. Across PlainRecalls, we track 83,000+ recalls from FDA, CPSC, and NHTSA to help consumers stay informed and act quickly when safety issues arise.

Nearby Recalls in This Category

Other recalls in the same product category — useful for spotting patterns across the same defect class or manufacturer.

Compare this recall with Lowes Foods sour cream and onion flavored potato chips, 8oz… →

Data Sources

Data as of 2025. Source: FDA, CPSC, NHTSA, USDA FSIS federal recall databases.

  • Source: FDA — Food and Drug Administration, openFDA Enforcement API (food, drug, and medical device recalls)
  • Source: CPSC — Consumer Product Safety Commission Recalls API (consumer product recalls and hazards)
  • Source: NHTSA — National Highway Traffic Safety Administration Recalls API (vehicle safety recalls)
  • Source: USDA FSIS — Food Safety and Inspection Service (meat, poultry, and egg product recalls)

Recall information is sourced from official federal agency databases. Always verify recall details with the issuing agency for the most current status. This information is for research and awareness purposes only.

All federal data sources used on this page

Source: Federal recall agencies (FDA, CPSC, NHTSA, USDA FSIS) Aggregated multi-agency recall feeds · 2024 Recall data normalized across federal agency feeds; severity classifications follow each agency's own taxonomy (FDA Class I/II/III; CPSC, NHTSA, USDA FSIS).