Severity
Moderate
ModerateActive
CPSC recall · Reported March 31, 2017
Black+Decker Portable Table Saws Made by Rexon Recalled Due to Laceration and Impact Injury Hazards; Sold Exclusively at Walmart
The table saw stand can collapse unexpectedly, posing laceration and impact injury hazards to the operator.
Rexon Industrial Corp., Ltd. of Taiwan recalled The recall involves model number JT2504BD Black+Decker brand 10-inch table saws. The tabl… - a moderate-severity action.
Black+Decker Portable Table Saws Made by Rexon Recalled Due to Laceration and Impact Inju… was recalled by Rexon Industrial Corp., Ltd. of Taiwan in March 31, 2017. Reason: The table saw stand can collapse unexpectedly, posing laceration and impact injury hazards to the operator.. Remedy: Consumers should immediately stop using the recalled table saws and contact Rexon for a f…. Verify recall #17118 with the CPSC before acting.
The recall
Rexon Industrial Corp., Ltd. of Taiwan issued this moderate-severity CPSC recall-The table saw stand can collapse unexpectedly, posing laceration and impact injury hazards to the operator..
- Moderate
- severity level
- March 31, 2017
- reported
Sourced from official CPSC enforcement records. Verify recall #17118 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.
Recall Insight
This CPSC action (record #17118) was formally reported on March 31, 2017. It is classified under Moderate severity, with a current status of Active. Rexon Industrial Corp., Ltd. of Taiwan is listed as the recalling firm. Federal records list the affected scope as About 400.
The documented reason for this recall is: The table saw stand can collapse unexpectedly, posing laceration and impact injury hazards to the operator. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Consumers should immediately stop using the recalled table saws and contact Rexon for a free replacement stand. - consumers holding this product should act on that instruction rather than relying on general guidance.
Within the same product category the archive holds 6 closely related recalls, 6 from CPSC - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.
Household Products recalls over time
Where this recall sits in its category - 3,056 household products recalls on record
Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.
Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.
Affected scope
About 400
Related Recalls
6
6 from same agency
Product description
The recall involves model number JT2504BD Black+Decker brand 10-inch table saws. The table saws sit on a black metal foldable stand. Black+Decker and JT2504BD are printed on the front right side of the table saw.
Reason for recall
The table saw stand can collapse unexpectedly, posing laceration and impact injury hazards to the operator.
Remedy, what to do
Consumers should immediately stop using the recalled table saws and contact Rexon for a free replacement stand.
Recall Profile
| Attribute | Value |
|---|---|
| Agency | U.S. Consumer Product Safety Commission |
| Severity class | Moderate |
| Status | Active |
| Recall number | 17118 |
| Date reported | March 31, 2017 |
| Date initiated | March 31, 2017 |
| Recalling firm | Rexon Industrial Corp., Ltd. of Taiwan |
| Affected scope | About 400 |
| Distribution | Not disclosed |
| Official source | CPSC notice → |
Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.
What to do with this recall
Consumers should immediately stop using the recalled table saws and contact Rexon for a free replacement stand.
- Check the recall number (17118) and product description against the item you own. Search the archive
- Confirm the current status and remedy on the official CPSC notice before acting. CPSC notice
- Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next
This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.
Frequently Asked Questions
What product was recalled? ▼
The recall involves model number JT2504BD Black+Decker brand 10-inch table saws. The table saws sit on a black metal foldable stand. Black+Decker and JT2504BD are printed on the front right side of the table saw.. Recalled by Rexon Industrial Corp., Ltd. of Taiwan. Units affected: About 400.
Why was this product recalled? ▼
The table saw stand can collapse unexpectedly, posing laceration and impact injury hazards to the operator.
What should consumers do? ▼
Consumers should immediately stop using the recalled table saws and contact Rexon for a free replacement stand.
Which agency issued this recall? ▼
This recall was issued by the CPSC on March 31, 2017. Severity: Moderate. Recall number: 17118.
How do I check if my product is affected by a recall? ▼
Check the product description and recall number (17118) against your product. Visit the official CPSC website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product? ▼
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.
Nearby Recalls in This Category
Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.
CPSC Moderate
Cooper Lighting Recalls Metalux Optimized High Bay LED Light Fixtures Due to Fire Hazard
Cooper Lighting, LLC, of Peachtree City, Georgia · 2026-07-02
CPSC Moderate
Winco Fireworks International Recalls Roman Candles 8 Shot Fireworks Due to Risk of Serious Injury from Explosion and B…
· 2026-07-02
CPSC Moderate
Winco Fireworks International Recalls Unity 7 Shot 200 Gram Aerial Cake Fireworks Due to Risk of Serious Injury from Ex…
· 2026-07-02
CPSC Moderate
Kith Retail Recalls Children's Loungewear Sets Due to Risk of Serious Injury from Burn Hazard; Violate Mandatory Standa…
· 2026-06-25
CPSC Moderate
Southern Telecom Expands Recall of Lomi Waxing Kits Due to Risk of Serious Injury or Death from Fire and Burn Hazards; …
· 2026-06-25
Compare this recall with Cooper Lighting Recalls Metalux Optimized High Bay LED Ligh… →
Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: CPSC, reported March 31, 2017. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.