PlainRecalls
ModerateActive

CPSC recall · Reported September 21, 2018

Woodcraft Recalls Clip-On Adapters for Motorcycle Handlebars Due to Crash Hazard

The adapter plate on the motorcycle handlebars can crack and fail, posing a crash hazard.

Recall #
18226
Affected scope
About 400
Verify with CPSC →
View my saved recalls

Woodcraft Technologies Inc., of Winchendon, Mass. recalled This recall involves Woodcraft clip-on on adapter plates. The adapter plates are the cent… - a moderate-severity action.

Woodcraft Recalls Clip-On Adapters for Motorcycle Handlebars Due to Crash Hazard was recalled by Woodcraft Technologies Inc., of Winchendon, Mass. in September 21, 2018. Reason: The adapter plate on the motorcycle handlebars can crack and fail, posing a crash hazard.. Remedy: Consumers should immediately stop using the recalled adapter plates and contact Woodcraft…. Verify recall #18226 with the CPSC before acting.

The recall

Woodcraft Technologies Inc., of Winchendon, Mass. issued this moderate-severity CPSC recall-The adapter plate on the motorcycle handlebars can crack and fail, posing a crash hazard..

Moderate
severity level
September 21, 2018
reported

Sourced from official CPSC enforcement records. Verify recall #18226 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.

Recall Insight

This CPSC action (record #18226) was formally reported on September 21, 2018. It is classified under Moderate severity, with a current status of Active. Woodcraft Technologies Inc., of Winchendon, Mass. is listed as the recalling firm. Federal records list the affected scope as About 400.

The documented reason for this recall is: The adapter plate on the motorcycle handlebars can crack and fail, posing a crash hazard. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Consumers should immediately stop using the recalled adapter plates and contact Woodcraft for a free replacement. - consumers holding this product should act on that instruction rather than relying on general guidance.

Within the same product category the archive holds 6 closely related recalls, 6 from CPSC - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.

Vehicles recalls over time

Where this recall sits in its category - 7,642 vehicles recalls on record

0200400600 20052008201120142017202020232026 82
Severity2487872426High severity (most serious)Moderate severityLow severity
Where this recall sits in the database

Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.

Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.

Severity

Moderate

Affected scope

About 400

Related Recalls

6

6 from same agency

Product description

This recall involves Woodcraft clip-on on adapter plates. The adapter plates are the center part of the assembly sold to replace your handlebars with a clip-on style set up that can be adjusted for street riding or track use. They can be installed either in an "up" or "down" position. They are compatible with certain Yamaha FZ07 and Ducati Monster motorcycles. They were sold in black and have "Woodcraft" printed in the middle of the plate. The part number can be found on the left end side of the packaging. Part Number Models 12-0407AP Adapter plate base unit 12-1407 Yamaha FZ07 '15-'18 Clip-on Riser Set 1" w/Adapter Plate 12-2407 Yamaha FZ07 '15-'18 Clip-on Riser Set 1-1/2" W/Adapter Plate 12-1630 Ducati Monster 1200 '14-'16 1 Inch Clip-on Adapter Plate Risers 12-1631 Ducati Monster 821 '14-'16 1 Inch Clip-on Adapter Plate Risers 12-2630 Ducati Monster 1200 '14-'16, 1-1/2 Inch Clip-on Adapter Plate Risers 12-2631 Ducati Monster 821 '14-'16, 1-1/2 Inch Clip-on Adapter Plate Risers

Reason for recall

The adapter plate on the motorcycle handlebars can crack and fail, posing a crash hazard.

Remedy, what to do

Consumers should immediately stop using the recalled adapter plates and contact Woodcraft for a free replacement.

Recall Profile

Structured summary of the CPSC recall record
Attribute Value
Agency U.S. Consumer Product Safety Commission
Severity class Moderate
Status Active
Recall number 18226
Date reported September 21, 2018
Date initiated September 21, 2018
Recalling firm Woodcraft Technologies Inc., of Winchendon, Mass.
Affected scope About 400
Distribution Not disclosed
Official source CPSC notice →

Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.

What to do with this recall

Consumers should immediately stop using the recalled adapter plates and contact Woodcraft for a free replacement.

  • Check the recall number (18226) and product description against the item you own. Search the archive
  • Confirm the current status and remedy on the official CPSC notice before acting. CPSC notice
  • Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next

This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.

Frequently Asked Questions

What product was recalled?
This recall involves Woodcraft clip-on on adapter plates. The adapter plates are the center part of the assembly sold to replace your handlebars with a clip-on style set up that can be adjusted for street riding or track use. They can be installed either in an "up" or "down" position. They are compatible with certain Yamaha FZ07 and Ducati Monster motorcycles. They were sold in black and have "Woodcraft" printed in the middle of the plate. The part number can be found on the left end side of the packaging. Part Number Models 12-0407AP Adapter plate base unit 12-1407 Yamaha FZ07 '15-'18 Clip-on Riser Set 1" w/Adapter Plate 12-2407 Yamaha FZ07 '15-'18 Clip-on Riser Set 1-1/2" W/Adapter Plate 12-1630 Ducati Monster 1200 '14-'16 1 Inch Clip-on Adapter Plate Risers 12-1631 Ducati Monster 821 '14-'16 1 Inch Clip-on Adapter Plate Risers 12-2630 Ducati Monster 1200 '14-'16, 1-1/2 Inch Clip-on Adapter Plate Risers 12-2631 Ducati Monster 821 '14-'16, 1-1/2 Inch Clip-on Adapter Plate Risers. Recalled by Woodcraft Technologies Inc., of Winchendon, Mass.. Units affected: About 400.
Why was this product recalled?
The adapter plate on the motorcycle handlebars can crack and fail, posing a crash hazard.
What should consumers do?
Consumers should immediately stop using the recalled adapter plates and contact Woodcraft for a free replacement.
Which agency issued this recall?
This recall was issued by the CPSC on September 21, 2018. Severity: Moderate. Recall number: 18226.
How do I check if my product is affected by a recall?
Check the product description and recall number (18226) against your product. Visit the official CPSC website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product?
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.

Nearby Recalls in This Category

Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.

Compare this recall with Yamazuki Recalls Youth All-Terrain Vehicles (ATVs) Due to R… →

Browse all Vehicles recalls →

Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: CPSC, reported September 21, 2018. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.