Severity
Moderate
ModerateActive
CPSC recall · Reported December 11, 2018
Penn State Industries Recalls Woodworking Jaw Chuck Systems Due to Laceration Hazard
The jaws can loosen from the chuck and break off, posing a laceration hazard.
Compiled from official public sources by the editorial team.
Verify with CPSC →
Industrial Supply Ltd., of China recalled This recall involves Penn State Industries CSCBARR5 quick change jaw chuck systems used w… - a moderate-severity action.
Penn State Industries Recalls Woodworking Jaw Chuck Systems Due to Laceration Hazard was recalled by Industrial Supply Ltd., of China in December 11, 2018. Reason: The jaws can loosen from the chuck and break off, posing a laceration hazard.. Remedy: Consumers should immediately stop using the recalled jaw chuck systems and contact Penn S…. Verify recall #19045 with the CPSC before acting.
The recall
Industrial Supply Ltd., of China issued this moderate-severity CPSC recall-The jaws can loosen from the chuck and break off, posing a laceration hazard..
- Moderate
- severity level
- December 11, 2018
- reported
Sourced from official CPSC enforcement records. Verify recall #19045 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.
Recall Insight
This CPSC action (record #19045) was formally reported on December 11, 2018. It is classified under Moderate severity, with a current status of Active. Industrial Supply Ltd., of China is listed as the recalling firm. Federal records list the affected scope as About 1,000.
The documented reason for this recall is: The jaws can loosen from the chuck and break off, posing a laceration hazard. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Consumers should immediately stop using the recalled jaw chuck systems and contact Penn State Industries to receive a full refund of the purchase price. - consumers holding this product should act on that instruction rather than relying on general guidance.
Within the same product category the archive holds 6 closely related recalls, 6 from CPSC - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.
Household Products recalls over time
Where this recall sits in its category - 3,056 household products recalls on record
Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.
Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.
Affected scope
About 1,000
Related Recalls
6
6 from same agency
Product description
This recall involves Penn State Industries CSCBARR5 quick change jaw chuck systems used with woodworking lathes. The recalled jaw chuck systems are made of steel, are silver in color and measure about 3.875 inches in diameter. "PSI Woodworking Products" and product number "CSCBARR5" are printed on the side of the chuck.
Reason for recall
The jaws can loosen from the chuck and break off, posing a laceration hazard.
Remedy, what to do
Consumers should immediately stop using the recalled jaw chuck systems and contact Penn State Industries to receive a full refund of the purchase price.
Recall Profile
| Attribute | Value |
|---|---|
| Agency | U.S. Consumer Product Safety Commission |
| Severity class | Moderate |
| Status | Active |
| Recall number | 19045 |
| Date reported | December 11, 2018 |
| Date initiated | December 11, 2018 |
| Recalling firm | Industrial Supply Ltd., of China |
| Affected scope | About 1,000 |
| Distribution | Not disclosed |
| Official source | CPSC notice → |
Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.
What to do with this recall
Consumers should immediately stop using the recalled jaw chuck systems and contact Penn State Industries to receive a full refund…
- Check the recall number (19045) and product description against the item you own. Search the archive
- Confirm the current status and remedy on the official CPSC notice before acting. CPSC notice
- Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next
This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.
Frequently Asked Questions
What product was recalled? ▼
This recall involves Penn State Industries CSCBARR5 quick change jaw chuck systems used with woodworking lathes. The recalled jaw chuck systems are made of steel, are silver in color and measure about 3.875 inches in diameter. "PSI Woodworking Products" and product number "CSCBARR5" are printed on the side of the chuck.. Recalled by Industrial Supply Ltd., of China. Units affected: About 1,000.
Why was this product recalled? ▼
The jaws can loosen from the chuck and break off, posing a laceration hazard.
What should consumers do? ▼
Consumers should immediately stop using the recalled jaw chuck systems and contact Penn State Industries to receive a full refund of the purchase price.
Which agency issued this recall? ▼
This recall was issued by the CPSC on December 11, 2018. Severity: Moderate. Recall number: 19045.
How do I check if my product is affected by a recall? ▼
Check the product description and recall number (19045) against your product. Visit the official CPSC website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product? ▼
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.
Nearby Recalls in This Category
Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.
CPSC Moderate
Cooper Lighting Recalls Metalux Optimized High Bay LED Light Fixtures Due to Fire Hazard
Cooper Lighting, LLC, of Peachtree City, Georgia · 2026-07-02
CPSC Moderate
Winco Fireworks International Recalls Roman Candles 8 Shot Fireworks Due to Risk of Serious Injury from Explosion and B…
· 2026-07-02
CPSC Moderate
Winco Fireworks International Recalls Unity 7 Shot 200 Gram Aerial Cake Fireworks Due to Risk of Serious Injury from Ex…
· 2026-07-02
CPSC Moderate
Kith Retail Recalls Children's Loungewear Sets Due to Risk of Serious Injury from Burn Hazard; Violate Mandatory Standa…
· 2026-06-25
CPSC Moderate
Southern Telecom Expands Recall of Lomi Waxing Kits Due to Risk of Serious Injury or Death from Fire and Burn Hazards; …
· 2026-06-25
Compare this recall with Cooper Lighting Recalls Metalux Optimized High Bay LED Ligh… →
Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: CPSC, reported December 11, 2018. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.