Severity
Not classified by agency
No agency classActive
CPSC recall · Reported February 17, 2022
BrushX Hot Air Brushes Recalled Due to Electrocution or Shock Hazard; Imported by Ecom Brands (Recall Alert)
The recalled hot air brushes do not have an immersion protection device, posing an electrocution or shock hazard to the user if it falls into water when plugged in.
The CPSC recalled This recall involves the BrushX Styler, Dryer & Volumizer, also called the BrushX One; an….
BrushX Hot Air Brushes Recalled Due to Electrocution or Shock Hazard; Imported by Ecom Br… was recalled and listed by the CPSC in February 17, 2022. Reason: The recalled hot air brushes do not have an immersion protection device, posing an electrocution or shock haz…. Remedy: Consumers should immediately stop using the recalled hot air brushes, destroy them by unp…. Verify recall #22725 with the CPSC before acting.
The recall
issued this CPSC recall-The recalled hot air brushes do not have an immersion protection device, posing an electrocution or shock haz….
- None
- agency class
- February 17, 2022
- reported
Sourced from official CPSC enforcement records. Verify recall #22725 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.
Recall Insight
This CPSC action (record #22725) was formally reported on February 17, 2022. The CPSC does not publish a hazard classification for its recalls, so this record carries no agency severity grade, with a current status of Active. The recalling firm is not specified in the federal record. Federal records list the affected scope as About 100,000.
The documented reason for this recall is: The recalled hot air brushes do not have an immersion protection device, posing an electrocution or shock hazard to the user if it falls into water when plugged in. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Consumers should immediately stop using the recalled hot air brushes, destroy them by unplugging the unit and then cutting the cord, and email a photo of the destroyed product to BrushX at replacemen… - consumers holding this product should act on that instruction rather than relying on general guidance.
Within the same product category the archive holds 6 closely related recalls - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.
Medical Devices recalls over time
Where this recall sits in its category - 40,861 medical devices recalls on record
Affected scope
About 100,000
Related Recalls
6
0 from same agency
Product description
This recall involves the BrushX Styler, Dryer & Volumizer, also called the BrushX One; and the BrushX Gen.2 hot air brushes. The brushes were sold in black and black/pink color combinations. Recalled brushes have a "not waterproof" symbol to the left of the CE mark on the rear of the brush.
Reason for recall
The recalled hot air brushes do not have an immersion protection device, posing an electrocution or shock hazard to the user if it falls into water when plugged in.
Remedy, what to do
Consumers should immediately stop using the recalled hot air brushes, destroy them by unplugging the unit and then cutting the cord, and email a photo of the destroyed product to BrushX at replacement@mybrushx.com to receive a free, upgraded replacement product. BrushX is contacting all purchasers directly.
Recall Profile
| Attribute | Value |
|---|---|
| Agency | U.S. Consumer Product Safety Commission |
| Severity class | Not classified by agency |
| Status | Active |
| Recall number | 22725 |
| Date reported | February 17, 2022 |
| Date initiated | February 17, 2022 |
| Recalling firm | Not disclosed |
| Affected scope | About 100,000 |
| Distribution | Not disclosed |
| Official source | CPSC notice → |
Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.
What to do with this recall
Consumers should immediately stop using the recalled hot air brushes, destroy them by unplugging the unit and then cutting the co…
- Check the recall number (22725) and product description against the item you own. Search the archive
- Confirm the current status and remedy on the official CPSC notice before acting. CPSC notice
- Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next
This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.
Frequently Asked Questions
What product was recalled? ▼
This recall involves the BrushX Styler, Dryer & Volumizer, also called the BrushX One; and the BrushX Gen.2 hot air brushes. The brushes were sold in black and black/pink color combinations. Recalled brushes have a "not waterproof" symbol to the left of the CE mark on the rear of the brush.. Units affected: About 100,000.
Why was this product recalled? ▼
The recalled hot air brushes do not have an immersion protection device, posing an electrocution or shock hazard to the user if it falls into water when plugged in.
What should consumers do? ▼
Consumers should immediately stop using the recalled hot air brushes, destroy them by unplugging the unit and then cutting the cord, and email a photo of the destroyed product to BrushX at replacement@mybrushx.com to receive a free, upgraded replacement product. BrushX is contacting all purchasers directly.
Which agency issued this recall? ▼
This recall was issued by the CPSC on February 17, 2022. CPSC does not publish a hazard classification for this recall. Recall number: 22725.
How do I check if my product is affected by a recall? ▼
Check the product description and recall number (22725) against your product. Visit the official CPSC website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product? ▼
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.
Nearby Recalls in This Category
Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.
FDA Devices Moderate
FARADRIVE STEERABLE SHEATH CLEAR, used to facilitate access to the vasculature and into the chambers of the heart, Mate…
Boston Scientific Corporation · 2026-07-29
FDA Devices Moderate
FARASTAR Ablation Generator EU, Pulsed Field Ablation Generator, Product ID 61M401; Percutaneous Cardiac Ablation Cathe…
Boston Scientific Corporation · 2026-07-29
FDA Devices Moderate
Halyard STANDARD LINE INSERTION PACK. Model/Catalog Number: PVHM234-01. Convenience kit.
AVID Medical, Inc. · 2026-07-29
FDA Devices Moderate
Penumbra System RED 68 Reperfusion Catheter REF: RED68KIT
Penumbra, Inc. · 2026-07-29
FDA Devices Moderate
SafeOp Patient Interface, REF: AIX11240, part of SafeOp 3: Neural Informatix System
Alphatec Spine, Inc. · 2026-07-29
Compare this recall with FARADRIVE STEERABLE SHEATH CLEAR, used to facilitate access… →
Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: CPSC, reported February 17, 2022. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of August 2026.