PlainRecalls
ModerateActive

CPSC recall · Reported February 6, 2025

Doosan Bobcat North America Recalls Bobcat & Steiner AirFX Finish Mower Deck Attachments Due to Crush Hazard

The recalled mower decks cannot be secured in the upright or tilted position by the locking pins during maintenance or service, posing a crush hazard.

Recall #
25121
Affected scope
About 552 (In addition, about 27 were sold in Canada)
Compiled from official public sources by the editorial team.
Verify with CPSC →
View my saved recalls

Doosan Bobcat North America, of West Fargo, North Dakota recalled This recall involves Bobcat & Steiner AirFX Finish Mower Deck attachments. The mower deck… - a moderate-severity action.

Doosan Bobcat North America Recalls Bobcat & Steiner AirFX Finish Mower Deck Attachments … was recalled by Doosan Bobcat North America, of West Fargo, North Dakota in February 6, 2025. Reason: The recalled mower decks cannot be secured in the upright or tilted position by the locking pins during maint…. Remedy: Consumers should immediately inspect and determine whether locking pins can be inserted w…. Verify recall #25121 with the CPSC before acting.

The recall

Doosan Bobcat North America, of West Fargo, North Dakota issued this moderate-severity CPSC recall-The recalled mower decks cannot be secured in the upright or tilted position by the locking pins during maint….

Moderate
severity level
February 6, 2025
reported

Sourced from official CPSC enforcement records. Verify recall #25121 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.

Recall Insight

This CPSC action (record #25121) was formally reported on February 6, 2025. It is classified under Moderate severity, with a current status of Active. Doosan Bobcat North America, of West Fargo, North Dakota is listed as the recalling firm. Federal records list the affected scope as About 552 (In addition, about 27 were sold in Canada).

The documented reason for this recall is: The recalled mower decks cannot be secured in the upright or tilted position by the locking pins during maintenance or service, posing a crush hazard. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Consumers should immediately inspect and determine whether locking pins can be inserted while the deck is in the upright or tilted position during maintenance or service. Contact Doosan Bobcat North … - consumers holding this product should act on that instruction rather than relying on general guidance.

Within the same product category the archive holds 6 closely related recalls, 6 from CPSC - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.

Household Products recalls over time

Where this recall sits in its category - 3,056 household products recalls on record

50100150200250 20052008201120142017202020232026 115
Severity2487872426High severity (most serious)Moderate severityLow severity
Where this recall sits in the database

Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.

Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.

Severity

Moderate

Affected scope

About 552 (In addition, about 27 were sold in Canada)

Related Recalls

6

6 from same agency

Product description

This recall involves Bobcat & Steiner AirFX Finish Mower Deck attachments. The mower decks are all black and labeled with "AirFX" and either "72" or "61" depending on the mower deck model. The following model numbers, located on the rear of the attachment on the right-side frame rail, are included in this recall. Model Number Description 7526575 72" AirFX 7526579 61" AirFX 7449223 61" AirFx Finish Mower 7447341 72" AirFx Finish Mower

Reason for recall

The recalled mower decks cannot be secured in the upright or tilted position by the locking pins during maintenance or service, posing a crush hazard.

Remedy, what to do

Consumers should immediately inspect and determine whether locking pins can be inserted while the deck is in the upright or tilted position during maintenance or service. Contact Doosan Bobcat North America or a Bobcat dealer to obtain a free repair, which will be available in the near future. Until then, if the locking pins cannot be inserted, obtain two straps, each rated for 1,500 lbs., and wrap a strap around each front tractor axle, securing each strap to the mower deck when performing service or maintenance. Consumers should contact Doosan if they are unable to obtain straps, and straps will be provided at no cost to the consumer. Doosan Bobcat North America is contacting all known purchasers.

Recall Profile

Structured summary of the CPSC recall record
Attribute Value
Agency U.S. Consumer Product Safety Commission
Severity class Moderate
Status Active
Recall number 25121
Date reported February 6, 2025
Date initiated February 6, 2025
Recalling firm Doosan Bobcat North America, of West Fargo, North Dakota
Affected scope About 552 (In addition, about 27 were sold in Canada)
Distribution Not disclosed
Official source CPSC notice →

Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.

What to do with this recall

Consumers should immediately inspect and determine whether locking pins can be inserted while the deck is in the upright or tilte…

  • Check the recall number (25121) and product description against the item you own. Search the archive
  • Confirm the current status and remedy on the official CPSC notice before acting. CPSC notice
  • Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next

This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.

Frequently Asked Questions

What product was recalled?
This recall involves Bobcat & Steiner AirFX Finish Mower Deck attachments. The mower decks are all black and labeled with "AirFX" and either "72" or "61" depending on the mower deck model. The following model numbers, located on the rear of the attachment on the right-side frame rail, are included in this recall. Model Number Description 7526575 72" AirFX 7526579 61" AirFX 7449223 61" AirFx Finish Mower 7447341 72" AirFx Finish Mower. Recalled by Doosan Bobcat North America, of West Fargo, North Dakota. Units affected: About 552 (In addition, about 27 were sold in Canada).
Why was this product recalled?
The recalled mower decks cannot be secured in the upright or tilted position by the locking pins during maintenance or service, posing a crush hazard.
What should consumers do?
Consumers should immediately inspect and determine whether locking pins can be inserted while the deck is in the upright or tilted position during maintenance or service. Contact Doosan Bobcat North America or a Bobcat dealer to obtain a free repair, which will be available in the near future. Until then, if the locking pins cannot be inserted, obtain two straps, each rated for 1,500 lbs., and wrap a strap around each front tractor axle, securing each strap to the mower deck when performing service or maintenance. Consumers should contact Doosan if they are unable to obtain straps, and straps will be provided at no cost to the consumer. Doosan Bobcat North America is contacting all known purchasers.
Which agency issued this recall?
This recall was issued by the CPSC on February 6, 2025. Severity: Moderate. Recall number: 25121.
How do I check if my product is affected by a recall?
Check the product description and recall number (25121) against your product. Visit the official CPSC website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product?
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.

Nearby Recalls in This Category

Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.

Compare this recall with Cooper Lighting Recalls Metalux Optimized High Bay LED Ligh… →

Browse all Household Products recalls →

Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: CPSC, reported February 6, 2025. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.