Severity
Moderate
ModerateActive
CPSC recall · Reported May 8, 2025
Sanven Technology Recalls Vevor Cable Railing Kits Due to Entrapment Hazard
The bottom hole on the cable support posts is over four inches from the bottom of the base plate, posing an entrapment hazard to consumers.
Compiled from official public sources by the editorial team.
Verify with CPSC →
The CPSC recalled This recall involves Vevor's cable railing kits for indoor or outdoor use. The cable supp… - a moderate-severity action.
Sanven Technology Recalls Vevor Cable Railing Kits Due to Entrapment Hazard was recalled and listed by the CPSC in May 8, 2025. Reason: The bottom hole on the cable support posts is over four inches from the bottom of the base plate, posing an e…. Remedy: Consumers should stop using the cable railing kits immediately, prevent children from acc…. Verify recall #25251 with the CPSC before acting.
The recall
issued this moderate-severity CPSC recall-The bottom hole on the cable support posts is over four inches from the bottom of the base plate, posing an e….
- Moderate
- severity level
- May 8, 2025
- reported
Sourced from official CPSC enforcement records. Verify recall #25251 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.
Recall Insight
This CPSC action (record #25251) was formally reported on May 8, 2025. It is classified under Moderate severity, with a current status of Active. The recalling firm is not specified in the federal record. Federal records list the affected scope as About 800.
The documented reason for this recall is: The bottom hole on the cable support posts is over four inches from the bottom of the base plate, posing an entrapment hazard to consumers. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Consumers should stop using the cable railing kits immediately, prevent children from accessing the area where they are located, and contact Vevor for a full refund. Vevor will provide pre-paid shipp… - consumers holding this product should act on that instruction rather than relying on general guidance.
Within the same product category the archive holds 6 closely related recalls, 6 from CPSC - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.
Electronics recalls over time
Where this recall sits in its category - 609 electronics recalls on record
Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.
Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.
Affected scope
About 800
Related Recalls
6
6 from same agency
Product description
This recall involves Vevor's cable railing kits for indoor or outdoor use. The cable support posts are made of stainless steel and were sold in black and silver colors. "Vevor" is printed on a label located on the top of each support post, and the P/N or P/C number is on the label of the product's outer packaging. If the consumer has discarded the outer packaging, the product model can be identified through the following product features. (P/N) or (P/C) # Color Number of Holes Overall Height of Cable Support Post (in inches) Cross-sectional Dimensions (in inches) Location of the Holes on Cable Support Post 1JZLGZHS9142UYBR4V0 black 10 36" 1.18" x 1.96" L-shaped Holes 1JZLGZHS1067CSWRBV0 black 12 42" 1.18" x 1.96" L-shaped Holes 1JZLGZ106755UOBB9V0 black 12 42" 1.96" x 1.96" L-shaped Holes LGZY106.72.55KZF0V0 silver 12 42" 1" x 2" Horizontal Holes 1JZLGZ91455YMDM3LV0 /1JZLGZ91455YMDM3LV0-0801 silver 10 36" 1.96" x 1.96" Horizontal Holes
Reason for recall
The bottom hole on the cable support posts is over four inches from the bottom of the base plate, posing an entrapment hazard to consumers.
Remedy, what to do
Consumers should stop using the cable railing kits immediately, prevent children from accessing the area where they are located, and contact Vevor for a full refund. Vevor will provide pre-paid shipping labels so that consumers can return the recalled cable railing kits. Alternatively, consumers can provide photographic evidence of disposal or destruction of the cable support posts to recalling@vevor.com.
Recall Profile
| Attribute | Value |
|---|---|
| Agency | U.S. Consumer Product Safety Commission |
| Severity class | Moderate |
| Status | Active |
| Recall number | 25251 |
| Date reported | May 8, 2025 |
| Date initiated | May 8, 2025 |
| Recalling firm | Not disclosed |
| Affected scope | About 800 |
| Distribution | Not disclosed |
| Official source | CPSC notice → |
Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.
What to do with this recall
Consumers should stop using the cable railing kits immediately, prevent children from accessing the area where they are located, …
- Check the recall number (25251) and product description against the item you own. Search the archive
- Confirm the current status and remedy on the official CPSC notice before acting. CPSC notice
- Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next
This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.
Frequently Asked Questions
What product was recalled? ▼
This recall involves Vevor's cable railing kits for indoor or outdoor use. The cable support posts are made of stainless steel and were sold in black and silver colors. "Vevor" is printed on a label located on the top of each support post, and the P/N or P/C number is on the label of the product's outer packaging. If the consumer has discarded the outer packaging, the product model can be identified through the following product features. (P/N) or (P/C) # Color Number of Holes Overall Height of Cable Support Post (in inches) Cross-sectional Dimensions (in inches) Location of the Holes on Cable Support Post 1JZLGZHS9142UYBR4V0 black 10 36" 1.18" x 1.96" L-shaped Holes 1JZLGZHS1067CSWRBV0 black 12 42" 1.18" x 1.96" L-shaped Holes 1JZLGZ106755UOBB9V0 black 12 42" 1.96" x 1.96" L-shaped Holes LGZY106.72.55KZF0V0 silver 12 42" 1" x 2" Horizontal Holes 1JZLGZ91455YMDM3LV0 /1JZLGZ91455YMDM3LV0-0801 silver 10 36" 1.96" x 1.96" Horizontal Holes. Units affected: About 800.
Why was this product recalled? ▼
The bottom hole on the cable support posts is over four inches from the bottom of the base plate, posing an entrapment hazard to consumers.
What should consumers do? ▼
Consumers should stop using the cable railing kits immediately, prevent children from accessing the area where they are located, and contact Vevor for a full refund. Vevor will provide pre-paid shipping labels so that consumers can return the recalled cable railing kits. Alternatively, consumers can provide photographic evidence of disposal or destruction of the cable support posts to recalling@vevor.com.
Which agency issued this recall? ▼
This recall was issued by the CPSC on May 8, 2025. Severity: Moderate. Recall number: 25251.
How do I check if my product is affected by a recall? ▼
Check the product description and recall number (25251) against your product. Visit the official CPSC website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product? ▼
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.
Nearby Recalls in This Category
Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.
CPSC Moderate
Projecting LED Finger Light Toys Recalled Due to Risk of Serious Injury Death from Battery Ingestion; Violate Mandatory…
Shenzhen Bopu Product Design Co., Ltd., dba POPOOO, of China · 2026-07-02
CPSC Moderate
Combination Smoke and Carbon Monoxide (CO) Detectors Recalled Due to Risk of Serious Injury or Death from Failure to Al…
· 2026-06-25
CPSC Moderate
Raychy Children's Light Sneakers Recalled Due to Risk of Serious Injury or Death from Battery Ingestion; Violate Mandat…
· 2026-06-25
CPSC Moderate
Super Off-Road Solar Power Banks Recalled Due to Overheating; Imported by Spector & Co.
· 2026-06-25
CPSC Moderate
School Specialty Recalls Tip Restraint Kits Included in Childcraft Furniture Due to Risk of Serious Injury or Death fro…
School Specialty, LLC, of Greenville, Wisconsin · 2026-06-11
Compare this recall with Projecting LED Finger Light Toys Recalled Due to Risk of Se… →
Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: CPSC, reported May 8, 2025. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.