Severity
Moderate
CPSC recall · Reported October 30, 2025
The recalled chainsaw's chain brake may not activate, posing a laceration hazard.
Milwaukee Electric Tool Corp., of Brookfield, Wisconsin recalled This recall involves the M18 FUEL Top Handle Chainsaw, catalog number 2826-20 with a seri… - a moderate-severity action.
Milwaukee Tool Recalls M18 FUEL 14" and 12" Top Handle Chainsaws Due to Laceration Hazard was recalled by Milwaukee Electric Tool Corp., of Brookfield, Wisconsin in October 30, 2025. Reason: The recalled chainsaw's chain brake may not activate, posing a laceration hazard.. Remedy: Consumers should immediately stop using the recalled chainsaw and contact Milwaukee Tool …. Verify recall #26064 with the CPSC before acting.
The recall
Milwaukee Electric Tool Corp., of Brookfield, Wisconsin issued this moderate-severity CPSC recall-The recalled chainsaw's chain brake may not activate, posing a laceration hazard..
Sourced from official CPSC enforcement records. Verify recall #26064 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.
This CPSC action (record #26064) was formally reported on October 30, 2025. It is classified under Moderate severity, with a current status of Active. Milwaukee Electric Tool Corp., of Brookfield, Wisconsin is listed as the recalling firm. Federal records list the affected scope as About 90,860 (In addition, about 7,500 were sold in Canada).
The documented reason for this recall is: The recalled chainsaw's chain brake may not activate, posing a laceration hazard. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Consumers should immediately stop using the recalled chainsaw and contact Milwaukee Tool for a free repair. Consumers should register their product at https://service.milwaukeetool.com/support/eservi… - consumers holding this product should act on that instruction rather than relying on general guidance.
Within the same product category the archive holds 6 closely related recalls, 6 from CPSC - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.
Where this recall sits in its category - 7,642 vehicles recalls on record
Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.
Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.
Severity
Moderate
Affected scope
About 90,860 (In addition, about 7,500 were sold in Canada)
Related Recalls
6
6 from same agency
This recall involves the M18 FUEL Top Handle Chainsaw, catalog number 2826-20 with a serial break identified with "A" in the product's serial number. The catalog number can be found on the upper right portion of the product's nameplate. The serial number can be found on upper left portion of the nameplate, and the serial break level is the 4th digit of the serial number. The product is a battery-operated chainsaw that comes with either a 12" or 14" bar, which is intended for use with Milwaukee's M18 batteries. The product is sold either individually as a bare tool that includes a chain and bar cover and blade wrench, or as a kit that includes two (2)M18 batteries, an M18 battery charger, a chain and bar cover and a blade wrench.
The recalled chainsaw's chain brake may not activate, posing a laceration hazard.
Consumers should immediately stop using the recalled chainsaw and contact Milwaukee Tool for a free repair. Consumers should register their product at https://service.milwaukeetool.com/support/eservice to receive a prepaid shipping label to return their product to Milwaukee Tool for repair.
| Attribute | Value |
|---|---|
| Agency | U.S. Consumer Product Safety Commission |
| Severity class | Moderate |
| Status | Active |
| Recall number | 26064 |
| Date reported | October 30, 2025 |
| Date initiated | October 30, 2025 |
| Recalling firm | Milwaukee Electric Tool Corp., of Brookfield, Wisconsin |
| Affected scope | About 90,860 (In addition, about 7,500 were sold in Canada) |
| Distribution | Not disclosed |
| Official source | CPSC notice → |
Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.
What to do with this recall
Consumers should immediately stop using the recalled chainsaw and contact Milwaukee Tool for a free repair. Consumers should regi…
This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.
Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.
Yongkang Ruihe Metal Products Co. Ltd., of China · 2026-06-25
· 2026-06-18
CooCooBaby, of China · 2026-06-18
Kawasaki Motors Manufacturing Corp., U.S.A., of Lincoln, Nebraska · 2026-06-11
· 2026-06-11
Compare this recall with Yamazuki Recalls Youth All-Terrain Vehicles (ATVs) Due to R… →
Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: CPSC, reported October 30, 2025. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.