Severity
Critical
NHTSA recall · Reported March 3, 2026
Ford Motor Company (Ford) is recalling certain 2021-2026 Ford Bronco and 2021-2024 Ford Edge vehicles. The Accessory Protocol Interface Module (APIM) may overheat and shutdown, wh…
Ford recalled Ford Motor Company (Ford) is recalling certain 2021-2026 Ford Bronco and 2021-2024 Ford E… - a critical-severity action.
FORD 2021-2025: BACK OVER PREVENTION:SOFTWARE was recalled by Ford in March 3, 2026. Reason: Ford Motor Company (Ford) is recalling certain 2021-2026 Ford Bronco and 2021-2024 Ford Edge vehicles. The Ac…. Remedy: The APIM software will be updated by a dealer, or through an over-the-air (OTA) update, f…. Verify recall #26V124000 with the NHTSA before acting.
The recall
Ford issued this critical-severity NHTSA recall-Ford Motor Company (Ford) is recalling certain 2021-2026 Ford Bronco and 2021-2024 Ford Edge vehicles. The Ac….
Sourced from official NHTSA enforcement records. Verify recall #26V124000 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.
This NHTSA action (record #26V124000) was formally reported on March 3, 2026. It is classified under Critical severity, with a current status of Active. Ford is listed as the recalling firm. The number of affected units is not disclosed in the agency filing, which is common for drug and food recalls where lot-level tracking supersedes unit counts.
The documented reason for this recall is: Ford Motor Company (Ford) is recalling certain 2021-2026 Ford Bronco and 2021-2024 Ford Edge vehicles. The Accessory Protocol Interface Module (APIM) may overheat and shutdown, which can prevent the rearview camera imag… The specific hazard cited in the filing is: A rearview camera that fails to display an image can reduce the driver’s view behind the vehicle, increasing the risk of a crash.. Distribution data in the federal record shows the product reached: United States. Distribution scope directly affects the consumer exposure window and determines whether a recall remains regional or escalates into a nationwide advisory. The remedy documented by the agency is: The APIM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters are expected to be mailed March 30, 2026. Owners may contact Ford Cu… - consumers holding this product should act on that instruction rather than relying on general guidance.
Within the same product category the archive holds 6 closely related recalls - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.
Where this recall sits in its category - 7,642 vehicles recalls on record
Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified high severity.
Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.
Severity
Critical
Affected scope
Unknown
Related Recalls
6
0 from same agency
Ford Motor Company (Ford) is recalling certain 2021-2026 Ford Bronco and 2021-2024 Ford Edge vehicles. The Accessory Protocol Interface Module (APIM) may overheat and shutdown, which can prevent the rearview camera image from displaying as intended.
Ford Motor Company (Ford) is recalling certain 2021-2026 Ford Bronco and 2021-2024 Ford Edge vehicles. The Accessory Protocol Interface Module (APIM) may overheat and shutdown, which can prevent the rearview camera image from displaying as intended.
A rearview camera that fails to display an image can reduce the driver’s view behind the vehicle, increasing the risk of a crash.
The APIM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters are expected to be mailed March 30, 2026. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 26S09. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on March 5, 2026.
| Attribute | Value |
|---|---|
| Agency | National Highway Traffic Safety Administration |
| Severity class | Critical |
| Status | Active |
| Recall number | 26V124000 |
| Date reported | March 3, 2026 |
| Date initiated | March 3, 2026 |
| Recalling firm | Ford |
| Affected scope | Not disclosed |
| Distribution | United States |
| Official source | NHTSA notice → |
Profile values are sourced directly from the official NHTSA enforcement record. Source: National Highway Traffic Safety Administration.
What to do with this recall
The APIM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letter…
This page summarizes the official NHTSA record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.
Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.
Yongkang Ruihe Metal Products Co. Ltd., of China · 2026-06-25
· 2026-06-18
CooCooBaby, of China · 2026-06-18
Kawasaki Motors Manufacturing Corp., U.S.A., of Lincoln, Nebraska · 2026-06-11
· 2026-06-11
Compare this recall with Yamazuki Recalls Youth All-Terrain Vehicles (ATVs) Due to R… →
Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: NHTSA, reported March 3, 2026. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.