Severity
Moderate
ModerateClass IITerminated
FDA Devices recall · Reported October 24, 2018
ADVIA Centaur CKMB Master Curve Material, Cat No. 07867768 Product Usage: For in vitro diagnostic use for evaluating the ADVIA Centaur CKMB assay. This material is intended to be run singly as unknown samples after a two-point calibration has been performed on the system.
A potential bias was identified with certain kits compared to the internal standards.
Compiled from official public sources by the editorial team.
Verify with FDA Devices →
Siemens Healthcare Diagnostics, Inc recalled ADVIA Centaur CKMB Master Curve Material, Cat No. 07867768 Product Usage: For in vi… - a moderate-severity action.
ADVIA Centaur CKMB Master Curve Material, Cat No. 07867768 Product Usage: For in vi… was recalled by Siemens Healthcare Diagnostics, Inc in October 24, 2018. Reason: A potential bias was identified with certain kits compared to the internal standards.. Check the official notice for the remedy. Verify recall #Z-0115-2019 with the FDA Devices before acting.
The recall
Siemens Healthcare Diagnostics, Inc issued this moderate-severity FDA Devices recall-A potential bias was identified with certain kits compared to the internal standards..
- Moderate
- severity level
- Class II
- classification
- October 24, 2018
- reported
Sourced from official FDA Devices enforcement records. Verify recall #Z-0115-2019 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.
Recall Insight
This FDA Devices action (record #Z-0115-2019) was formally reported on October 24, 2018, with the manufacturer initiating the action on July 24, 2018. It is classified under Moderate severity (Class II), with a current status of Terminated. Siemens Healthcare Diagnostics, Inc is listed as the recalling firm, operating out of East Walpole, MA. Federal records list the affected scope as 379 sets.
The documented reason for this recall is: A potential bias was identified with certain kits compared to the internal standards. Distribution data in the federal record shows the product reached: US Nationwide Distribution. Distribution scope directly affects the consumer exposure window and determines whether a recall remains regional or escalates into a nationwide advisory.
Within the same product category the archive holds 6 closely related recalls - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.
Medical Devices recalls over time
Where this recall sits in its category - 40,422 medical devices recalls on record
Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.
Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.
Affected scope
379 sets
Related Recalls
6
0 from same agency
Product description
ADVIA Centaur CKMB Master Curve Material, Cat No. 07867768 Product Usage: For in vitro diagnostic use for evaluating the ADVIA Centaur CKMB assay. This material is intended to be run singly as unknown samples after a two-point calibration has been performed on the system.
Reason for recall
A potential bias was identified with certain kits compared to the internal standards.
Recall Profile
| Attribute | Value |
|---|---|
| Agency | U.S. Food and Drug Administration |
| Severity class | Moderate (Class II) |
| Status | Terminated |
| Recall number | Z-0115-2019 |
| Date reported | October 24, 2018 |
| Date initiated | July 24, 2018 |
| Recalling firm | Siemens Healthcare Diagnostics, Inc |
| Firm location | East Walpole, MA |
| Affected scope | 379 sets |
| Distribution | US Nationwide Distribution |
Profile values are sourced directly from the official FDA Devices enforcement record. Source: U.S. Food and Drug Administration.
What to do with this recall
Match your product against the recall record, then act on the agency remedy.
- Check the recall number (Z-0115-2019) and product description against the item you own. Search the archive
- Confirm the current status with FDA Devices before acting, recall details can be updated.
- Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next
This page summarizes the official FDA Devices record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.
Frequently Asked Questions
What product was recalled? ▼
ADVIA Centaur CKMB Master Curve Material, Cat No. 07867768 Product Usage: For in vitro diagnostic use for evaluating the ADVIA Centaur CKMB assay. This material is intended to be run singly as unknown samples after a two-point calibration has been performed on the system.. Recalled by Siemens Healthcare Diagnostics, Inc. Units affected: 379 sets.
Why was this product recalled? ▼
A potential bias was identified with certain kits compared to the internal standards.
Which agency issued this recall? ▼
This recall was issued by the FDA Devices on October 24, 2018. Severity: Moderate. Recall number: Z-0115-2019.
Where was the recalled product distributed? ▼
Distribution: US Nationwide Distribution.
How do I check if my product is affected by a recall? ▼
Check the product description and recall number (Z-0115-2019) against your product. Visit the official FDA Devices website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
Should I stop using a recalled medication or medical device? ▼
Do not stop using a recalled medication or device without consulting your healthcare provider first, as abruptly discontinuing treatment could pose its own health risks. Your doctor can advise on alternatives or whether the recall applies to your specific product lot. Check the recall number and lot information against your product packaging.
Nearby Recalls in This Category
Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.
CPSC Moderate
Rowenta Recalls Cordless Vacuum Cleaners Due to Risk of Serious Injury from Fire and Burn Hazards
· 2026-07-02
CPSC Moderate
Winco Fireworks International Recalls Roman Candles 8 Shot Fireworks Due to Risk of Serious Injury from Explosion and B…
· 2026-07-02
CPSC Moderate
Winco Fireworks International Recalls Unity 7 Shot 200 Gram Aerial Cake Fireworks Due to Risk of Serious Injury from Ex…
· 2026-07-02
CPSC Moderate
Daikin Comfort Technologies Manufacturing Recalls Amana Air Conditioners and Heat Pumps Due to Risk of Serious Injury f…
· 2026-06-25
CPSC Moderate
Super Off-Road Solar Power Banks Recalled Due to Overheating; Imported by Spector & Co.
· 2026-06-25
Compare this recall with Rowenta Recalls Cordless Vacuum Cleaners Due to Risk of Ser… →
Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: FDA Devices, reported October 24, 2018. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.