PlainRecalls
ModerateClass IITerminated

FDA Devices recall · Reported November 6, 2019

Implant Direct Scan Adapter Assembly Replant platform for the following part numbers: 6035-09PT-M (3.5mmD)/UDI : 10841307123934,;6043-09PT-M (4.3mmD)/UDI : 10841307123941; and 6050-09PT-M (5.00mmD)/ UDI: 10841307123958

The action is being initiated due to incorrect assembly of the scan adapter . The result of the incorrect assembly could cause the clinician not to be able to capture the position…

Recall #
Z-0261-2020
Affected scope
107 Scan Adapters
Initiated
September 6, 2018
Compiled from official public sources by the editorial team.
Verify with FDA Devices →
View my saved recalls

Implant Direct Sybron Manufacturing, LLC recalled Implant Direct Scan Adapter Assembly Replant platform for the following part numbers: 603… - a moderate-severity action.

Implant Direct Scan Adapter Assembly Replant platform for the following part numbers: 603… was recalled by Implant Direct Sybron Manufacturing, LLC in November 6, 2019. Reason: The action is being initiated due to incorrect assembly of the scan adapter . The result of the incorrect ass…. Check the official notice for the remedy. Verify recall #Z-0261-2020 with the FDA Devices before acting.

The recall

Implant Direct Sybron Manufacturing, LLC issued this moderate-severity FDA Devices recall-The action is being initiated due to incorrect assembly of the scan adapter . The result of the incorrect ass….

Moderate
severity level
Class II
classification
November 6, 2019
reported

Sourced from official FDA Devices enforcement records. Verify recall #Z-0261-2020 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.

Recall Insight

This FDA Devices action (record #Z-0261-2020) was formally reported on November 6, 2019, with the manufacturer initiating the action on September 6, 2018. It is classified under Moderate severity (Class II), with a current status of Terminated. Implant Direct Sybron Manufacturing, LLC is listed as the recalling firm, operating out of Westlake Village, CA. Federal records list the affected scope as 107 Scan Adapters.

The documented reason for this recall is: The action is being initiated due to incorrect assembly of the scan adapter . The result of the incorrect assembly could cause the clinician not to be able to capture the position and orientation of a dental implant(s) … Distribution data in the federal record shows the product reached: US: OH, CO, UT, NY, PA, CA, FL , GA, LA, NE, NJ,SC, MA, VA, UT, OUS: Canada, Australia,. Distribution scope directly affects the consumer exposure window and determines whether a recall remains regional or escalates into a nationwide advisory.

Within the same product category the archive holds 6 closely related recalls, 3 from FDA Devices - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.

Medical Devices recalls over time

Where this recall sits in its category - 40,322 medical devices recalls on record

-1,00001,0002,0003,0004,000 20052008201120142017202020232026 1,248
Severity2487872426High severity (most serious)Moderate severityLow severity
Where this recall sits in the database

Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.

Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.

Severity

Moderate

Affected scope

107 Scan Adapters

Related Recalls

6

3 from same agency

Product description

Implant Direct Scan Adapter Assembly Replant platform for the following part numbers: 6035-09PT-M (3.5mmD)/UDI : 10841307123934,;6043-09PT-M (4.3mmD)/UDI : 10841307123941; and 6050-09PT-M (5.00mmD)/ UDI: 10841307123958

Reason for recall

The action is being initiated due to incorrect assembly of the scan adapter . The result of the incorrect assembly could cause the clinician not to be able to capture the position and orientation of a dental implant(s) or lab analog during the digital scanning process which could result in a delay for the patient.

Recall Profile

Structured summary of the FDA Devices recall record
Attribute Value
Agency U.S. Food and Drug Administration
Severity class Moderate (Class II)
Status Terminated
Recall number Z-0261-2020
Date reported November 6, 2019
Date initiated September 6, 2018
Recalling firm Implant Direct Sybron Manufacturing, LLC
Firm location Westlake Village, CA
Affected scope 107 Scan Adapters
Distribution US: OH, CO, UT, NY, PA, CA, FL , GA, LA, NE, NJ,SC, MA, VA, UT, OUS: Canada, Australia,

Profile values are sourced directly from the official FDA Devices enforcement record. Source: U.S. Food and Drug Administration.

What to do with this recall

Match your product against the recall record, then act on the agency remedy.

  • Check the recall number (Z-0261-2020) and product description against the item you own. Search the archive
  • Confirm the current status with FDA Devices before acting, recall details can be updated.
  • Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next

This page summarizes the official FDA Devices record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.

Frequently Asked Questions

What product was recalled?
Implant Direct Scan Adapter Assembly Replant platform for the following part numbers: 6035-09PT-M (3.5mmD)/UDI : 10841307123934,;6043-09PT-M (4.3mmD)/UDI : 10841307123941; and 6050-09PT-M (5.00mmD)/ UDI: 10841307123958. Recalled by Implant Direct Sybron Manufacturing, LLC. Units affected: 107 Scan Adapters.
Why was this product recalled?
The action is being initiated due to incorrect assembly of the scan adapter . The result of the incorrect assembly could cause the clinician not to be able to capture the position and orientation of a dental implant(s) or lab analog during the digital scanning process which could result in a delay for the patient.
Which agency issued this recall?
This recall was issued by the FDA Devices on November 6, 2019. Severity: Moderate. Recall number: Z-0261-2020.
Where was the recalled product distributed?
Distribution: US: OH, CO, UT, NY, PA, CA, FL , GA, LA, NE, NJ,SC, MA, VA, UT, OUS: Canada, Australia,.
How do I check if my product is affected by a recall?
Check the product description and recall number (Z-0261-2020) against your product. Visit the official FDA Devices website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
Should I stop using a recalled medication or medical device?
Do not stop using a recalled medication or device without consulting your healthcare provider first, as abruptly discontinuing treatment could pose its own health risks. Your doctor can advise on alternatives or whether the recall applies to your specific product lot. Check the recall number and lot information against your product packaging.

Nearby Recalls in This Category

Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.

Compare this recall with Rowenta Recalls Cordless Vacuum Cleaners Due to Risk of Ser… →

Browse all Medical Devices recalls →

Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: FDA Devices, reported November 6, 2019. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.