FDA Devices recall · Reported December 10, 2014
Cannulaide, Model 101. The Cannulaide product is composed of die-cut hydrocolloid coated polyurethane film with an integral hook strip (i.e., Velcro) to allow for the use of a loop material to help secure a nasal interface. The Cannulaide is applied under and over the nose of infants to provide a protective barrier to the philtrum, columella, septum, nares, and tip of nose. It is available in multiple sizes that vary the external geometry and nare hole size and spacing to allow for use on
Cannulaide model CA 101 was recalled because the firm discovered this model was packed and labeled as CA 102.
Beevers Manufacturing & Supply, Inc. recalled Cannulaide, Model 101. The Cannulaide product is composed of die-cut hydrocolloid coated … - a moderate-severity action.
Cannulaide, Model 101. The Cannulaide product is composed of die-cut hydrocolloid coated … was recalled by Beevers Manufacturing & Supply, Inc. in December 10, 2014. Reason: Cannulaide model CA 101 was recalled because the firm discovered this model was packed and labeled as CA 102.. Check the official notice for the remedy. Verify recall #Z-0487-2015 with the FDA Devices before acting.
The recall
Beevers Manufacturing & Supply, Inc. issued this moderate-severity FDA Devices recall-Cannulaide model CA 101 was recalled because the firm discovered this model was packed and labeled as CA 102..
- Moderate
- severity level
- 393 units
- affected scope
- Class II
- classification
- December 10, 2014
- reported
Sourced from official FDA Devices enforcement records. Verify recall #Z-0487-2015 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.
Recall Insight
This recall's affected scope, documented in the Recall Profile below, stays within a single-region or limited-distribution footprint. Distribution scope (see Distribution below) directly affects the consumer exposure window and determines whether a recall remains regional or escalates into a nationwide advisory.
Within the same product category the archive holds 6 closely related recalls, 6 from FDA Devices - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.
Medical Devices recalls over time
Where this recall sits in its category - 41,021 medical devices recalls on record
Of 88,244 recalls with an agency hazard classification, 19,068 are high severity, 64,652 moderate, and 4,524 low. A further 16,179 CPSC/NHTSA recalls have no agency class and are excluded from this split. This recall is classified moderate severity.
Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.
Product description
Cannulaide, Model 101. The Cannulaide product is composed of die-cut hydrocolloid coated polyurethane film with an integral hook strip (i.e., Velcro) to allow for the use of a loop material to help secure a nasal interface. The Cannulaide is applied under and over the nose of infants to provide a protective barrier to the philtrum, columella, septum, nares, and tip of nose. It is available in multiple sizes that vary the external geometry and nare hole size and spacing to allow for use on infants ranging from less than 700 grams to greater than 3000 grams. It is a non sterile, single patient use, disposable device.
Reason for recall
Cannulaide model CA 101 was recalled because the firm discovered this model was packed and labeled as CA 102.
Recall Profile
| Attribute | Value |
|---|---|
| Agency | U.S. Food and Drug Administration |
| Severity class | Moderate (Class II) |
| Status | Terminated |
| Recall number | Z-0487-2015 |
| Date reported | December 10, 2014 |
| Date initiated | January 18, 2007 |
| Recalling firm | Beevers Manufacturing & Supply, Inc. |
| Firm location | McMinnville, OR |
| Affected scope | 393 units |
| Distribution | Worldwide Distribution: US (nationwide) and country of: ME-Musaffah. |
Profile values are sourced directly from the official FDA Devices enforcement record. Source: U.S. Food and Drug Administration.
What to do with this recall
Match your product against the recall record, then act on the agency remedy.
- Check the recall number (Z-0487-2015) and product description against the item you own. Search the archive
- Confirm the current status with FDA Devices before acting, recall details can be updated.
- Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next
This page summarizes the official FDA Devices record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.
Frequently Asked Questions
What product was recalled? ▼
Why was this product recalled? ▼
Which agency issued this recall? ▼
Where was the recalled product distributed? ▼
Should I stop using a recalled medication or medical device? ▼
Nationwide recalls with similar severity or category timing
Drug and device notices outside this firm and state, matched by severity timing and product category.
Similar severity · nearest report date
Same archive severity grade (Moderate), closest by report date among other firms and states.
Similar Medical Devices · nearest report date
Same product category, closest by report date among other firms and states (deduped against the severity set).
Compare this recall with GORE VIABIL Short Wire Biliary Endoprosthesis, Model No. VS… → · All Medical Devices recalls
Methodology · Corrections · Archive as of August 2026