PlainRecalls
ModerateClass IIOngoing

FDA Devices recall · Reported December 4, 2024

Autosampler, Models: SIL-40C XR CL, SIL-40C X3 CL

There have been cases of failure of the main board due to condensation water occurring in the gap between thermal insulation material on the underside of the main base dropping on…

Recall #
Z-0554-2025
Affected scope
48
Initiated
October 9, 2024
Compiled from official public sources by the editorial team.
Verify with FDA Devices →
View my saved recalls

Shimadzu Corp. Analytical & Measuring Instruments Div. recalled Autosampler, Models: SIL-40C XR CL, SIL-40C X3 CL - a moderate-severity action.

Autosampler, Models: SIL-40C XR CL, SIL-40C X3 CL was recalled by Shimadzu Corp. Analytical & Measuring Instruments Div. in December 4, 2024. Reason: There have been cases of failure of the main board due to condensation water occurring in the gap between the…. Check the official notice for the remedy. Verify recall #Z-0554-2025 with the FDA Devices before acting.

The recall

Shimadzu Corp. Analytical & Measuring Instruments Div. issued this moderate-severity FDA Devices recall-There have been cases of failure of the main board due to condensation water occurring in the gap between the….

Moderate
severity level
48 units
affected scope
Class II
classification
December 4, 2024
reported

Sourced from official FDA Devices enforcement records. Verify recall #Z-0554-2025 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.

Recall Insight

This FDA Devices action (record #Z-0554-2025) was formally reported on December 4, 2024, with the manufacturer initiating the action on October 9, 2024. It is classified under Moderate severity (Class II), with a current status of Ongoing. Shimadzu Corp. Analytical & Measuring Instruments Div. is listed as the recalling firm, operating out of Kyoto. Federal records list the affected scope as 48.

The documented reason for this recall is: There have been cases of failure of the main board due to condensation water occurring in the gap between thermal insulation material on the underside of the main base dropping onto the main board The symptoms and error… Distribution data in the federal record shows the product reached: Worldwide - US Nationwide distribution in the states of DE, PA and the country of DE.. Distribution scope directly affects the consumer exposure window and determines whether a recall remains regional or escalates into a nationwide advisory.

Within the same product category the archive holds 6 closely related recalls, 3 from FDA Devices - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.

Medical Devices recalls over time

Where this recall sits in its category - 40,322 medical devices recalls on record

-1,00001,0002,0003,0004,000 20052008201120142017202020232026 1,248
Severity2487872426High severity (most serious)Moderate severityLow severity
Where this recall sits in the database

Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.

Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.

Severity

Moderate

Affected scope

48

Related Recalls

6

3 from same agency

Product description

Autosampler, Models: SIL-40C XR CL, SIL-40C X3 CL

Reason for recall

There have been cases of failure of the main board due to condensation water occurring in the gap between thermal insulation material on the underside of the main base dropping onto the main board The symptoms and errors differ depending on the position where the water drops adhere. To date there have been examples of reports of inter-board communication errors, HOME POSITION error or SLIP error of XYZ drive units. The failure could result in delay of patient sample testing.

Recall Profile

Structured summary of the FDA Devices recall record
Attribute Value
Agency U.S. Food and Drug Administration
Severity class Moderate (Class II)
Status Ongoing
Recall number Z-0554-2025
Date reported December 4, 2024
Date initiated October 9, 2024
Recalling firm Shimadzu Corp. Analytical & Measuring Instruments Div.
Firm location Kyoto
Affected scope 48
Distribution Worldwide - US Nationwide distribution in the states of DE, PA and the country of DE.

Profile values are sourced directly from the official FDA Devices enforcement record. Source: U.S. Food and Drug Administration.

Scale of Impact

48 units affected - limited or regional distribution scale.

Regional (<10K units) ✓ This recall
Multi-state (10K – 100K units) -
Large-scale (100K – 1M units) -
Massive (≥1M units) -

Bracket cutoffs follow federal recall-disclosure conventions; bar widths scale linearly within each bracket. Source: PlainRecalls analysis of U.S. Food and Drug Administration filings.

What to do with this recall

Match your product against the recall record, then act on the agency remedy.

  • Check the recall number (Z-0554-2025) and product description against the item you own. Search the archive
  • Confirm the current status with FDA Devices before acting, recall details can be updated.
  • Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next

This page summarizes the official FDA Devices record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.

Frequently Asked Questions

What product was recalled?
Autosampler, Models: SIL-40C XR CL, SIL-40C X3 CL. Recalled by Shimadzu Corp. Analytical & Measuring Instruments Div.. Units affected: 48.
Why was this product recalled?
There have been cases of failure of the main board due to condensation water occurring in the gap between thermal insulation material on the underside of the main base dropping onto the main board The symptoms and errors differ depending on the position where the water drops adhere. To date there have been examples of reports of inter-board communication errors, HOME POSITION error or SLIP error of XYZ drive units. The failure could result in delay of patient sample testing.
Which agency issued this recall?
This recall was issued by the FDA Devices on December 4, 2024. Severity: Moderate. Recall number: Z-0554-2025.
Where was the recalled product distributed?
Distribution: Worldwide - US Nationwide distribution in the states of DE, PA and the country of DE..
How do I check if my product is affected by a recall?
Check the product description and recall number (Z-0554-2025) against your product. Visit the official FDA Devices website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
Should I stop using a recalled medication or medical device?
Do not stop using a recalled medication or device without consulting your healthcare provider first, as abruptly discontinuing treatment could pose its own health risks. Your doctor can advise on alternatives or whether the recall applies to your specific product lot. Check the recall number and lot information against your product packaging.

Nearby Recalls in This Category

Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.

Compare this recall with Rowenta Recalls Cordless Vacuum Cleaners Due to Risk of Ser… →

Browse all Medical Devices recalls →

Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: FDA Devices, reported December 4, 2024. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.