Severity
Moderate
Brilliance 64 and Ingenuity CT Computed Tomography X-Ray Scanning Systems: Brilliance 64 - Model #728231; and Ingenuity CT - Model # 728326, Distributed By: Philips Healthcare, Cleveland, OH. The Brilliance 64 and Ingenuity CT are Computed Tomography X-Ray Systems intended to produce cross-sectional images of the body by computer reconstruction of x-ray transmission data taken at different angles and planes. These devices may include signal analysis and display equipment, patient, and equipment
Reported: January 23, 2013 Initiated: December 3, 2012 #Z-0674-2013 A total of nine (9) units were distributed (3 units in the U.S & 6 units overseas) units
Philips Medical Systems (Cleveland) Inc issued this FDA Devices recall on January 23, 2013. Classified as Moderate severity (Class II). Approximately A total of nine (9) units were distributed (3 units in the U.S & 6 units overseas) units are affected. The recall was issued because: Software anomalies. Philips Medical Systems recalled their Brilliance 64 running software v4.0.0xx516 and their Ingenui…. This recall notice is sourced from official FDA Devices enforcement records. Below you will find the complete product description, hazard information, remedy instructions, and related recalls from the same manufacturer or product category.
Recall Insight
This FDA Devices action (record #Z-0674-2013) was formally reported on January 23, 2013, with the manufacturer initiating the action on December 3, 2012. It is classified under Moderate severity (Class II), with a current status of Terminated. Philips Medical Systems (Cleveland) Inc is listed as the recalling firm, operating out of Cleveland, OH. Federal records indicate A total of nine (9) units were distributed (3 units in the U.S & 6 units overseas) units are affected.
The documented reason for this recall is: Software anomalies. Philips Medical Systems recalled their Brilliance 64 running software v4.0.0xx516 and their Ingenuity CT running software v4.0.0xx518 due to software issues detected in these CT scanning systems. If… Distribution data in the federal record shows the product reached: Worldwide distribution: USA including IN, OH and OR; and the countries: Australia, Belgium, China, Israel, and Sweden.. Distribution scope directly affects the consumer exposure window and determines whether a recall remains regional or escalates into a nationwide advisory.
To put this record in context, PlainRecalls indexes 83,949 recalls across the FDA, CPSC, NHTSA and USDA FSIS going back to 1995. Within the same product category, the database holds 6 closely related recalls, of which 6 were also issued by FDA Devices. That clustering is a signal — repeated actions in a narrow category often indicate a systemic quality-control issue, a supplier-wide contamination, or a design defect that has propagated across product lines. This recall is roughly 13 years old; older recalls can remain relevant because many units enter resale, rental, and secondary-market channels where the original warning never reaches the end user. Always cross-check the recall number against the official agency page before relying on any summary.
Recall Distribution by Severity Class
Units Affected
A total of nine (9) units were distributed (3 units in the U.S & 6 units overseas)
Related Recalls
6
6 from same agency
Product Description
Brilliance 64 and Ingenuity CT Computed Tomography X-Ray Scanning Systems: Brilliance 64 - Model #728231; and Ingenuity CT - Model # 728326, Distributed By: Philips Healthcare, Cleveland, OH. The Brilliance 64 and Ingenuity CT are Computed Tomography X-Ray Systems intended to produce cross-sectional images of the body by computer reconstruction of x-ray transmission data taken at different angles and planes. These devices may include signal analysis and display equipment, patient, and equipment supports, components and accessories.
Reason for Recall
Software anomalies. Philips Medical Systems recalled their Brilliance 64 running software v4.0.0xx516 and their Ingenuity CT running software v4.0.0xx518 due to software issues detected in these CT scanning systems. If these issues were to re-occur they could pose the risk of injury to patients undergoing scans; device users; or device service personnel.
Details
- Recalling Firm
- Philips Medical Systems (Cleveland) Inc
- Units Affected
- A total of nine (9) units were distributed (3 units in the U.S & 6 units overseas)
- Distribution
- Worldwide distribution: USA including IN, OH and OR; and the countries: Australia, Belgium, China, Israel, and Sweden.
- Location
- Cleveland, OH
Recall Profile
| Attribute | Value |
|---|---|
| Agency | U.S. Food and Drug Administration |
| Severity class | Moderate (Class II) |
| Status | Terminated |
| Recall number | Z-0674-2013 |
| Date reported | January 23, 2013 |
| Date initiated | December 3, 2012 |
| Recalling firm | Philips Medical Systems (Cleveland) Inc |
| Units affected | A total of nine (9) units were distributed (3 units in the U.S & 6 units overseas) |
| Distribution | Worldwide distribution: USA including IN, OH and OR; and the countries: Australia, Belgium, China, Israel, and Sweden. |
Profile values are sourced directly from the official FDA Devices enforcement record. Source: U.S. Food and Drug Administration.
Frequently Asked Questions
What product was recalled? ▼
Brilliance 64 and Ingenuity CT Computed Tomography X-Ray Scanning Systems: Brilliance 64 - Model #728231; and Ingenuity CT - Model # 728326, Distributed By: Philips Healthcare, Cleveland, OH. The Brilliance 64 and Ingenuity CT are Computed Tomography X-Ray Systems intended to produce cross-sectional images of the body by computer reconstruction of x-ray transmission data taken at different angles and planes. These devices may include signal analysis and display equipment, patient, and equipment supports, components and accessories.. Recalled by Philips Medical Systems (Cleveland) Inc. Units affected: A total of nine (9) units were distributed (3 units in the U.S & 6 units overseas).
Why was this product recalled? ▼
Software anomalies. Philips Medical Systems recalled their Brilliance 64 running software v4.0.0xx516 and their Ingenuity CT running software v4.0.0xx518 due to software issues detected in these CT scanning systems. If these issues were to re-occur they could pose the risk of injury to patients undergoing scans; device users; or device service personnel.
Which agency issued this recall? ▼
This recall was issued by the FDA Devices on January 23, 2013. Severity: Moderate. Recall number: Z-0674-2013.
Where was the recalled product distributed? ▼
Distribution: Worldwide distribution: USA including IN, OH and OR; and the countries: Australia, Belgium, China, Israel, and Sweden..
How do I check if my product is affected by a recall? ▼
Check the product description and recall number (Z-0674-2013) against your product. Visit the official FDA Devices website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
Should I stop using a recalled medication or medical device? ▼
Do not stop using a recalled medication or device without consulting your healthcare provider first, as abruptly discontinuing treatment could pose its own health risks. Your doctor can advise on alternatives or whether the recall applies to your specific product lot. Check the recall number and lot information against your product packaging.
Recall Guides
Learn how the US recall system works and how to protect yourself and your household.
How the US Recall System Works
The three federal agencies, how recalls are initiated, and what happens next.
Understanding Recall Severity Classes
What Class I, II, and III mean and which recalls demand immediate action.
What to Do When a Product Is Recalled
Verify, claim your remedy, report injuries, and navigate the process.
How to Check If Your Products Are Recalled
Step-by-step guide to checking food, products, medications, and vehicles.
Recalled Products in Your Home
A room-by-room household audit guide for active recalls.
Most Recalled Product Categories
Rankings of highest-recall categories from FDA, CPSC, and NHTSA.
Recall Context
Product recalls are issued when a manufacturer, distributor, or federal agency determines that a product poses a safety risk to consumers. This recall is classified as moderate severity, indicating the product may cause temporary or medically reversible health consequences. Across PlainRecalls, we track 83,000+ recalls from FDA, CPSC, and NHTSA to help consumers stay informed and act quickly when safety issues arise.
Related Safety Data
Explore related product safety and public health data from federal sources.
Food Safety Inspections
FDA and state food facility inspection results — violations, enforcement actions, and compliance history for food manufacturers and processors.
PlainFoodSafe →
Ingredient Safety Data
FDA food additive and ingredient safety database — regulatory status, usage limits, and safety assessments for thousands of ingredients.
PlainIngredients →
Nutrition Data
USDA nutrition facts for 2M+ food items — calories, macros, vitamins, and ingredient analysis to verify what you consume.
GetFoodFacts →
Drug Safety Information
FDA drug data for 680+ medications — interactions, alternatives, side effects, and safety information for recalled and active drugs.
PlainMeds →
Product Injury Data
CPSC emergency room injury data for 838 product categories — 7.3M NEISS records tracking real-world consumer product injuries.
PlainSafety →
Recall Checker
Search our database of 83K+ recalls by product name, brand, or recall number across all agencies.
Check Now →
Recall Radar
Live feed of the latest recalls across FDA, CPSC, NHTSA, and USDA — filter by agency and severity.
View Radar →
Nearby Recalls in This Category
Other recalls in the same product category — useful for spotting patterns across the same defect class or manufacturer.
FDA Devices Moderate
Endo-Model Replacement Plateau; Item Number: 15-0027/11;
Waldemar Link GmbH & Co. KG (Mfg Site) · 2026-03-18
FDA Devices Low
Penner Pacific Bathing Spa, Model Numbers 360020-1P
Penner Patient Care, Inc. · 2026-03-18
FDA Devices Moderate
GEM Premier 5000 PAK, Part No. 00055360004.
Instrumentation Laboratory · 2026-03-18
FDA Devices Moderate
CHEMISTRY ANALYZER AU5800, REF: B96697, B96698, B23279, B23280, B23281
Beckman Coulter Mishima K.K. · 2026-03-18
FDA Devices Critical
Owner's Booklets and Instructions for Use that are used with the following blood glucose measurement devices. Descript…
Trividia Health, Inc. · 2026-03-18
Compare this recall with Endo-Model Replacement Plateau; Item Number: 15-0027/11; →
Data Sources
Data as of 2025. Source: FDA, CPSC, NHTSA, USDA FSIS federal recall databases.
- Source: FDA — Food and Drug Administration, openFDA Enforcement API (food, drug, and medical device recalls)
- Source: CPSC — Consumer Product Safety Commission Recalls API (consumer product recalls and hazards)
- Source: NHTSA — National Highway Traffic Safety Administration Recalls API (vehicle safety recalls)
- Source: USDA FSIS — Food Safety and Inspection Service (meat, poultry, and egg product recalls)
Recall information is sourced from official federal agency databases. Always verify recall details with the issuing agency for the most current status. This information is for research and awareness purposes only.
Read our methodology — how this data is sourced, computed, and verified.
All federal data sources used on this page
- U.S. Census Bureau ACS — demographic + housing + income data. census.gov/programs-surveys/acs
- BLS Occupational Employment and Wage Statistics (OEWS) — wage + employment by occupation. bls.gov/oes
- BEA Regional Economic Accounts — GDP + personal income by state/metro. bea.gov/data/regional
- U.S. Census Bureau County Business Patterns — establishment + employment by industry. census.gov/cbp
- IRS Statistics of Income (SOI) — tax-return aggregate data. irs.gov/statistics
- data.gov — U.S. federal open-data portal — discovery layer for additional federal sources. data.gov
Source: Federal recall agencies (FDA, CPSC, NHTSA, USDA FSIS) Aggregated multi-agency recall feeds · 2024 Recall data normalized across federal agency feeds; severity classifications follow each agency's own taxonomy (FDA Class I/II/III; CPSC, NHTSA, USDA FSIS).