PlainRecalls
ModerateClass IITerminated

FDA Devices recall · Reported January 29, 2014

SIMVIEW NT and SIMVIEW NT with IDI: October 01, 2012 Siemens ceased Simview distribution. Manufactured by: Mecaserto now known as Mecasim Parc de lEsplanade 9,Rue Niels Bohr 77400 Saint Thibault des Vignes- France The intended use of the SIEMENS branded SIMVIEW NT and SIMVIEW NT with IDI is a radiation therapy simulation system.

In a very rare occurrence an intended movement of the SimView NT simulation system components could not be stopped with usual hand control or the collision detection functionality.

Recall #
Z-0786-2014
Affected scope
65 active devices
Initiated
December 11, 2013
Verify with FDA Devices →
View my saved recalls

Siemens Medical Solutions USA, Inc recalled SIMVIEW NT and SIMVIEW NT with IDI: October 01, 2012 Siemens ceased Simview distributi… - a moderate-severity action.

SIMVIEW NT and SIMVIEW NT with IDI: October 01, 2012 Siemens ceased Simview distributi… was recalled by Siemens Medical Solutions USA, Inc in January 29, 2014. Reason: In a very rare occurrence an intended movement of the SimView NT simulation system components could not be st…. Check the official notice for the remedy. Verify recall #Z-0786-2014 with the FDA Devices before acting.

The recall

Siemens Medical Solutions USA, Inc issued this moderate-severity FDA Devices recall-In a very rare occurrence an intended movement of the SimView NT simulation system components could not be st….

Moderate
severity level
Class II
classification
January 29, 2014
reported

Sourced from official FDA Devices enforcement records. Verify recall #Z-0786-2014 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.

Recall Insight

This recall's affected scope, documented in the Recall Profile below, stays within a single-region or limited-distribution footprint. Distribution scope (see Distribution below) directly affects the consumer exposure window and determines whether a recall remains regional or escalates into a nationwide advisory.

Within the same product category the archive holds 6 closely related recalls, 6 from FDA Devices - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.

Medical Devices recalls over time

Where this recall sits in its category - 41,021 medical devices recalls on record

01,0002,0003,0004,000 20052008201120142017202020232026 1,947
Severity1906864652High severity (most serious)Moderate severityLow severity
Where this agency-classified recall sits among FDA Class I/II/III notices

Of 88,244 recalls with an agency hazard classification, 19,068 are high severity, 64,652 moderate, and 4,524 low. A further 16,179 CPSC/NHTSA recalls have no agency class and are excluded from this split. This recall is classified moderate severity.

Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.

Product description

SIMVIEW NT and SIMVIEW NT with IDI: October 01, 2012 Siemens ceased Simview distribution. Manufactured by: Mecaserto now known as Mecasim Parc de lEsplanade 9,Rue Niels Bohr 77400 Saint Thibault des Vignes- France The intended use of the SIEMENS branded SIMVIEW NT and SIMVIEW NT with IDI is a radiation therapy simulation system.

Reason for recall

In a very rare occurrence an intended movement of the SimView NT simulation system components could not be stopped with usual hand control or the collision detection functionality.

Recall Profile

Structured summary of the FDA Devices recall record
Attribute Value
Agency U.S. Food and Drug Administration
Severity class Moderate (Class II)
Status Terminated
Recall number Z-0786-2014
Date reported January 29, 2014
Date initiated December 11, 2013
Recalling firm Siemens Medical Solutions USA, Inc
Firm location Martinez, CA
Affected scope 65 active devices
Distribution Class II Recall - Worldwide Distribution - US Distribution including the states of California, Louisiana, Massachusetts, Pennsylvania, New York, Kentucky and Michigan., and the countries of Bulgaria, Germany, Belarus, Russian Fed., P.R. C…

Profile values are sourced directly from the official FDA Devices enforcement record. Source: U.S. Food and Drug Administration.

What to do with this recall

Match your product against the recall record, then act on the agency remedy.

  • Check the recall number (Z-0786-2014) and product description against the item you own. Search the archive
  • Confirm the current status with FDA Devices before acting, recall details can be updated.
  • Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next

This page summarizes the official FDA Devices record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.

Frequently Asked Questions

What product was recalled?
SIMVIEW NT and SIMVIEW NT with IDI: October 01, 2012 Siemens ceased Simview distribution. Manufactured by: Mecaserto now known as Mecasim Parc de lEsplanade 9,Rue Niels Bohr 77400 Saint Thibault des Vignes- France The intended use of the SIEMENS branded SIMVIEW NT and SIMVIEW NT with IDI is a radiation therapy simulation system.. Recalled by Siemens Medical Solutions USA, Inc. Units affected: 65 active devices.
Why was this product recalled?
In a very rare occurrence an intended movement of the SimView NT simulation system components could not be stopped with usual hand control or the collision detection functionality.
Which agency issued this recall?
This recall was issued by the FDA Devices on January 29, 2014. Severity: Moderate. Recall number: Z-0786-2014.
Where was the recalled product distributed?
Distribution: Class II Recall - Worldwide Distribution - US Distribution including the states of California, Louisiana, Massachusetts, Pennsylvania, New York, Kentucky and Michigan., and the countries of Bulgaria, Germany, Belarus, Russian Fed., P.R. China, India, Republic Korea, Germany, Costa Rica, Argentina, Portugal, Greece, Bulgaria, Vietnam, Hungary, Italy, Palestinian Ter, Hungary, Jordan, Egypt Poland, Greece, Curacao, St Eus, Malaysia, Egypt, Malaysia, South Africa Turkey, Thailand, Qatar and Iraq..
Should I stop using a recalled medication or medical device?
Do not stop using a recalled medication or device without consulting your healthcare provider first, as abruptly discontinuing treatment could pose its own health risks. Your doctor can advise on alternatives or whether the recall applies to your specific product lot. Check the recall number and lot information against your product packaging.

Nationwide recalls with similar severity or category timing

Drug and device notices outside this firm and state, matched by severity timing and product category.

Compare this recall with GORE VIABIL Short Wire Biliary Endoprosthesis, Model No. VS… → · All Medical Devices recalls

This recall: FDA Devices, reported January 29, 2014. Severity classes follow each agency's own taxonomy; related-recall context is computed across the full archive.

Methodology · Corrections · Archive as of August 2026