PlainRecalls
ModerateClass IITerminated

FDA Devices recall · Reported April 5, 2017

Non-Sterile Double DIN to DIN "Y" Connector, Product Usage: Extension for connecting hemodialysis blood tubing to the hemodialyzer.

A customer relayed a complaint of a leaking dialysis tubing connector.

Recall #
Z-1679-2017
Affected scope
400 pieces
Initiated
January 20, 2015
Verify with FDA Devices →
View my saved recalls

Molded Products Inc recalled Non-Sterile Double DIN to DIN "Y" Connector, Product Usage: Extension for connecting h… — a moderate-severity action.

Non-Sterile Double DIN to DIN "Y" Connector, Product Usage: Extension for connecting h… was recalled by Molded Products Inc in April 5, 2017. Reason: A customer relayed a complaint of a leaking dialysis tubing connector.. Check the official notice for the remedy. Verify recall #Z-1679-2017 with the FDA Devices before acting.

The recall

Molded Products Inc issued this moderate-severity FDA Devices recall — A customer relayed a complaint of a leaking dialysis tubing connector..

Moderate
severity level
Class II
classification
April 5, 2017
reported

Sourced from official FDA Devices enforcement records. Verify recall #Z-1679-2017 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.

Recall Insight

This FDA Devices action (record #Z-1679-2017) was formally reported on April 5, 2017, with the manufacturer initiating the action on January 20, 2015. It is classified under Moderate severity (Class II), with a current status of Terminated. Molded Products Inc is listed as the recalling firm, operating out of Harlan, IA. Federal records list the affected scope as 400 pieces.

The documented reason for this recall is: A customer relayed a complaint of a leaking dialysis tubing connector. Distribution data in the federal record shows the product reached: Product was distributed to Ontario, Canada.. Distribution scope directly affects the consumer exposure window and determines whether a recall remains regional or escalates into a nationwide advisory.

Within the same product category the archive holds 6 closely related recalls, 6 from FDA Devices — clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.

Medical Devices recalls over time

Where this recall sits in its category — 40,409 medical devices recalls on record

-1,00001,0002,0003,0004,0005,000 20052008201120142017202020232026 1,243

Where this recall sits in the database

Severity2366872097High severity (most serious)Moderate severityLow severity
Where this recall sits in the database

Of 100,165 recalls in the database, 23,668 are high severity, 72,097 moderate, and 4,400 low. This recall is classified moderate severity.

Counts reflect market size and reporting activity, not inherent danger — we do not rank products by risk from raw recall volume.

Severity

Moderate

Affected scope

400 pieces

Related Recalls

6

6 from same agency

Product description

Non-Sterile Double DIN to DIN "Y" Connector, Product Usage: Extension for connecting hemodialysis blood tubing to the hemodialyzer.

Reason for recall

A customer relayed a complaint of a leaking dialysis tubing connector.

Recall Profile

Structured summary of the FDA Devices recall record
Attribute Value
Agency U.S. Food and Drug Administration
Severity class Moderate (Class II)
Status Terminated
Recall number Z-1679-2017
Date reported April 5, 2017
Date initiated January 20, 2015
Recalling firm Molded Products Inc
Firm location Harlan, IA
Affected scope 400 pieces
Distribution Product was distributed to Ontario, Canada.

Profile values are sourced directly from the official FDA Devices enforcement record. Source: U.S. Food and Drug Administration.

What to do with this recall

Match your product against the recall record, then act on the agency remedy.

  • Check the recall number (Z-1679-2017) and product description against the item you own. Search the archive
  • Confirm the current status with FDA Devices before acting — recall details can be updated.
  • Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next

This page summarizes the official FDA Devices record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.

Frequently Asked Questions

What product was recalled?
Non-Sterile Double DIN to DIN "Y" Connector, Product Usage: Extension for connecting hemodialysis blood tubing to the hemodialyzer.. Recalled by Molded Products Inc. Units affected: 400 pieces.
Why was this product recalled?
A customer relayed a complaint of a leaking dialysis tubing connector.
Which agency issued this recall?
This recall was issued by the FDA Devices on April 5, 2017. Severity: Moderate. Recall number: Z-1679-2017.
Where was the recalled product distributed?
Distribution: Product was distributed to Ontario, Canada..
How do I check if my product is affected by a recall?
Check the product description and recall number (Z-1679-2017) against your product. Visit the official FDA Devices website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
Should I stop using a recalled medication or medical device?
Do not stop using a recalled medication or device without consulting your healthcare provider first, as abruptly discontinuing treatment could pose its own health risks. Your doctor can advise on alternatives or whether the recall applies to your specific product lot. Check the recall number and lot information against your product packaging.

Nearby Recalls in This Category

Other recalls in the same product category — useful for spotting patterns across the same defect class or manufacturer.

Compare this recall with GE HealthCare TRADE IN CARESCAPE TELEMETRY SERVER ARK-2250L… →

Data Sources

Source: FDA, CPSC, and NHTSA federal recall databases. This recall: FDA Devices, reported April 5, 2017.

  • Source: FDA — Food and Drug Administration, openFDA Enforcement API (food, drug, and medical device recalls)
  • Source: CPSC — Consumer Product Safety Commission Recalls API (consumer product recalls and hazards)
  • Source: NHTSA — National Highway Traffic Safety Administration Recalls API (vehicle safety recalls)

Recall information is sourced from official federal agency databases. Always verify recall details with the issuing agency for the most current status. This information is for research and awareness purposes only.

Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records — no number is typed in by an editor. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of June 2026.