PlainRecalls
ModerateClass IIOngoing

FDA Devices recall · Reported May 28, 2025

META-TAN LAG/COMPRESSION SCREW KIT 90MM/85MM, REF: 71642690

Integrated Lag/Compression Screw Kit has a compression screw with hexagon socket that may be undersized, which causes the screw to be non-functional, which would require replaceme…

Recall #
Z-1806-2025
Affected scope
75
Initiated
March 18, 2025
Compiled from official public sources by the editorial team.
Verify with FDA Devices →
View my saved recalls

Smith & Nephew, Inc. recalled META-TAN LAG/COMPRESSION SCREW KIT 90MM/85MM, REF: 71642690 - a moderate-severity action.

META-TAN LAG/COMPRESSION SCREW KIT 90MM/85MM, REF: 71642690 was recalled by Smith & Nephew, Inc. in May 28, 2025. Reason: Integrated Lag/Compression Screw Kit has a compression screw with hexagon socket that may be undersized, whic…. Check the official notice for the remedy. Verify recall #Z-1806-2025 with the FDA Devices before acting.

The recall

Smith & Nephew, Inc. issued this moderate-severity FDA Devices recall-Integrated Lag/Compression Screw Kit has a compression screw with hexagon socket that may be undersized, whic….

Moderate
severity level
75 units
affected scope
Class II
classification
May 28, 2025
reported

Sourced from official FDA Devices enforcement records. Verify recall #Z-1806-2025 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.

Recall Insight

This FDA Devices action (record #Z-1806-2025) was formally reported on May 28, 2025, with the manufacturer initiating the action on March 18, 2025. It is classified under Moderate severity (Class II), with a current status of Ongoing. Smith & Nephew, Inc. is listed as the recalling firm, operating out of Memphis, TN. Federal records list the affected scope as 75.

The documented reason for this recall is: Integrated Lag/Compression Screw Kit has a compression screw with hexagon socket that may be undersized, which causes the screw to be non-functional, which would require replacement with another adequate size screw, and… Distribution data in the federal record shows the product reached: Worldwide - US Nationwide distribution in the states of FL, NH, TX, CA, OH, NY, AL, IA, MA, NV, MO, WA, LA, TN, NC, KY, NM, NJ, AZ and the country of ZA.. Distribution scope directly affects the consumer exposure window and determines whether a recall remains regional or escalates into a nationwide advisory.

Within the same product category the archive holds 6 closely related recalls, 3 from FDA Devices - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.

Medical Devices recalls over time

Where this recall sits in its category - 40,322 medical devices recalls on record

-1,00001,0002,0003,0004,000 20052008201120142017202020232026 1,248
Severity2487872426High severity (most serious)Moderate severityLow severity
Where this recall sits in the database

Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.

Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.

Severity

Moderate

Affected scope

75

Related Recalls

6

3 from same agency

Product description

META-TAN LAG/COMPRESSION SCREW KIT 90MM/85MM, REF: 71642690

Reason for recall

Integrated Lag/Compression Screw Kit has a compression screw with hexagon socket that may be undersized, which causes the screw to be non-functional, which would require replacement with another adequate size screw, and exchange may exceed 30 minutes.

Recall Profile

Structured summary of the FDA Devices recall record
Attribute Value
Agency U.S. Food and Drug Administration
Severity class Moderate (Class II)
Status Ongoing
Recall number Z-1806-2025
Date reported May 28, 2025
Date initiated March 18, 2025
Recalling firm Smith & Nephew, Inc.
Firm location Memphis, TN
Affected scope 75
Distribution Worldwide - US Nationwide distribution in the states of FL, NH, TX, CA, OH, NY, AL, IA, MA, NV, MO, WA, LA, TN, NC, KY, NM, NJ, AZ and the country of ZA.

Profile values are sourced directly from the official FDA Devices enforcement record. Source: U.S. Food and Drug Administration.

Scale of Impact

75 units affected - limited or regional distribution scale.

Regional (<10K units) ✓ This recall
Multi-state (10K – 100K units) -
Large-scale (100K – 1M units) -
Massive (≥1M units) -

Bracket cutoffs follow federal recall-disclosure conventions; bar widths scale linearly within each bracket. Source: PlainRecalls analysis of U.S. Food and Drug Administration filings.

What to do with this recall

Match your product against the recall record, then act on the agency remedy.

  • Check the recall number (Z-1806-2025) and product description against the item you own. Search the archive
  • Confirm the current status with FDA Devices before acting, recall details can be updated.
  • Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next

This page summarizes the official FDA Devices record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.

Frequently Asked Questions

What product was recalled?
META-TAN LAG/COMPRESSION SCREW KIT 90MM/85MM, REF: 71642690. Recalled by Smith & Nephew, Inc.. Units affected: 75.
Why was this product recalled?
Integrated Lag/Compression Screw Kit has a compression screw with hexagon socket that may be undersized, which causes the screw to be non-functional, which would require replacement with another adequate size screw, and exchange may exceed 30 minutes.
Which agency issued this recall?
This recall was issued by the FDA Devices on May 28, 2025. Severity: Moderate. Recall number: Z-1806-2025.
Where was the recalled product distributed?
Distribution: Worldwide - US Nationwide distribution in the states of FL, NH, TX, CA, OH, NY, AL, IA, MA, NV, MO, WA, LA, TN, NC, KY, NM, NJ, AZ and the country of ZA..
How do I check if my product is affected by a recall?
Check the product description and recall number (Z-1806-2025) against your product. Visit the official FDA Devices website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
Should I stop using a recalled medication or medical device?
Do not stop using a recalled medication or device without consulting your healthcare provider first, as abruptly discontinuing treatment could pose its own health risks. Your doctor can advise on alternatives or whether the recall applies to your specific product lot. Check the recall number and lot information against your product packaging.

Nearby Recalls in This Category

Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.

Compare this recall with Rowenta Recalls Cordless Vacuum Cleaners Due to Risk of Ser… →

Browse all Medical Devices recalls →

Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: FDA Devices, reported May 28, 2025. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.