PlainRecalls
ModerateClass IITerminated

FDA Devices recall · Reported June 8, 2016

Non-Vented Dispensing Pin with Luer Lock Ultrasite Valve Product Usage: Used for aspiration of medication from inverted bags or semi-rigid containers. Interavenous delivery of transferred medication(Device is not intended for direct infusion)

BBMI recently identified a potential for a tear in the outer blister packaging on a limited number of units. The tears have been identified in the blister package paper, where th…

Recall #
Z-1907-2016
Affected scope
11,000 units available in commercial channels
Initiated
April 14, 2016
Compiled from official public sources by the editorial team.
Verify with FDA Devices →
View my saved recalls

B. Braun Medical, Inc. recalled Non-Vented Dispensing Pin with Luer Lock Ultrasite Valve Product Usage: Used for as… - a moderate-severity action.

Non-Vented Dispensing Pin with Luer Lock Ultrasite Valve Product Usage: Used for as… was recalled by B. Braun Medical, Inc. in June 8, 2016. Reason: BBMI recently identified a potential for a tear in the outer blister packaging on a limited number of units. …. Check the official notice for the remedy. Verify recall #Z-1907-2016 with the FDA Devices before acting.

The recall

B. Braun Medical, Inc. issued this moderate-severity FDA Devices recall-BBMI recently identified a potential for a tear in the outer blister packaging on a limited number of units. ….

Moderate
severity level
11K units
affected scope
Class II
classification
June 8, 2016
reported

Sourced from official FDA Devices enforcement records. Verify recall #Z-1907-2016 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.

Recall Insight

This FDA Devices action (record #Z-1907-2016) was formally reported on June 8, 2016, with the manufacturer initiating the action on April 14, 2016. It is classified under Moderate severity (Class II), with a current status of Terminated. B. Braun Medical, Inc. is listed as the recalling firm, operating out of Allentown, PA. Federal records list the affected scope as 11,000 units available in commercial channels.

The documented reason for this recall is: BBMI recently identified a potential for a tear in the outer blister packaging on a limited number of units. The tears have been identified in the blister package paper, where the unit label writing is located. Distribution data in the federal record shows the product reached: US Nationwide Distribution in the states of: AL, AR, AZ, BC, CA, CO, CT, DE, FL, GA, HI, IA, IL, IN, KS, KY, LA, MA, MD, MI, MN, MO, MS, MT, NC, ND, NE, NH, NJ, NV, NY, OH, OK, OR, PA, RI, SC, SD, TN. TX, UT, VA, VT, WA…. Distribution scope directly affects the consumer exposure window and determines whether a recall remains regional or escalates into a nationwide advisory.

Within the same product category the archive holds 6 closely related recalls, 3 from FDA Devices - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.

Medical Devices recalls over time

Where this recall sits in its category - 40,322 medical devices recalls on record

-1,00001,0002,0003,0004,000 20052008201120142017202020232026 1,248
Severity2487872426High severity (most serious)Moderate severityLow severity
Where this recall sits in the database

Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.

Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.

Severity

Moderate

Affected scope

11,000 units available in commercial channels

Related Recalls

6

3 from same agency

Product description

Non-Vented Dispensing Pin with Luer Lock Ultrasite Valve Product Usage: Used for aspiration of medication from inverted bags or semi-rigid containers. Interavenous delivery of transferred medication(Device is not intended for direct infusion)

Reason for recall

BBMI recently identified a potential for a tear in the outer blister packaging on a limited number of units. The tears have been identified in the blister package paper, where the unit label writing is located.

Recall Profile

Structured summary of the FDA Devices recall record
Attribute Value
Agency U.S. Food and Drug Administration
Severity class Moderate (Class II)
Status Terminated
Recall number Z-1907-2016
Date reported June 8, 2016
Date initiated April 14, 2016
Recalling firm B. Braun Medical, Inc.
Firm location Allentown, PA
Affected scope 11,000 units available in commercial channels
Distribution US Nationwide Distribution in the states of: AL, AR, AZ, BC, CA, CO, CT, DE, FL, GA, HI, IA, IL, IN, KS, KY, LA, MA, MD, MI, MN, MO, MS, MT, NC, ND, NE, NH, NJ, NV, NY, OH, OK, OR, PA, RI, SC, SD, TN. TX, UT, VA, VT, WA, WI, WV and Puerto …

Profile values are sourced directly from the official FDA Devices enforcement record. Source: U.S. Food and Drug Administration.

Scale of Impact

11,000 units available in commercial channels units affected - limited or regional distribution scale.

Regional (<10K units) -
Multi-state (10K – 100K units) ✓ This recall
Large-scale (100K – 1M units) -
Massive (≥1M units) -

Bracket cutoffs follow federal recall-disclosure conventions; bar widths scale linearly within each bracket. Source: PlainRecalls analysis of U.S. Food and Drug Administration filings.

What to do with this recall

Match your product against the recall record, then act on the agency remedy.

  • Check the recall number (Z-1907-2016) and product description against the item you own. Search the archive
  • Confirm the current status with FDA Devices before acting, recall details can be updated.
  • Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next

This page summarizes the official FDA Devices record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.

Frequently Asked Questions

What product was recalled?
Non-Vented Dispensing Pin with Luer Lock Ultrasite Valve Product Usage: Used for aspiration of medication from inverted bags or semi-rigid containers. Interavenous delivery of transferred medication(Device is not intended for direct infusion). Recalled by B. Braun Medical, Inc.. Units affected: 11,000 units available in commercial channels.
Why was this product recalled?
BBMI recently identified a potential for a tear in the outer blister packaging on a limited number of units. The tears have been identified in the blister package paper, where the unit label writing is located.
Which agency issued this recall?
This recall was issued by the FDA Devices on June 8, 2016. Severity: Moderate. Recall number: Z-1907-2016.
Where was the recalled product distributed?
Distribution: US Nationwide Distribution in the states of: AL, AR, AZ, BC, CA, CO, CT, DE, FL, GA, HI, IA, IL, IN, KS, KY, LA, MA, MD, MI, MN, MO, MS, MT, NC, ND, NE, NH, NJ, NV, NY, OH, OK, OR, PA, RI, SC, SD, TN. TX, UT, VA, VT, WA, WI, WV and Puerto Rico.
How do I check if my product is affected by a recall?
Check the product description and recall number (Z-1907-2016) against your product. Visit the official FDA Devices website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
Should I stop using a recalled medication or medical device?
Do not stop using a recalled medication or device without consulting your healthcare provider first, as abruptly discontinuing treatment could pose its own health risks. Your doctor can advise on alternatives or whether the recall applies to your specific product lot. Check the recall number and lot information against your product packaging.

Nearby Recalls in This Category

Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.

Compare this recall with Rowenta Recalls Cordless Vacuum Cleaners Due to Risk of Ser… →

Browse all Medical Devices recalls →

Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: FDA Devices, reported June 8, 2016. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.