Severity
Moderate
ModerateClass IITerminated
FDA Devices recall · Reported August 21, 2013
Biomet 3i Dental Implant, Non-Platform Switched Parallel Walled Implant 5mm (D) x 13mm (L)
A small number of outer implant boxes may be mislabeled. The inner tray, containing the implant, is label correctly. This condition, if present and not recognized could potentiall…
Compiled from official public sources by the editorial team.
Verify with FDA Devices →
Biomet 3i, LLC recalled Biomet 3i Dental Implant, Non-Platform Switched Parallel Walled Implant 5mm (D) x 13mm (L) - a moderate-severity action.
Biomet 3i Dental Implant, Non-Platform Switched Parallel Walled Implant 5mm (D) x 13mm (L) was recalled by Biomet 3i, LLC in August 21, 2013. Reason: A small number of outer implant boxes may be mislabeled. The inner tray, containing the implant, is label cor…. Check the official notice for the remedy. Verify recall #Z-1961-2013 with the FDA Devices before acting.
The recall
Biomet 3i, LLC issued this moderate-severity FDA Devices recall-A small number of outer implant boxes may be mislabeled. The inner tray, containing the implant, is label cor….
- Moderate
- severity level
- 33 units
- affected scope
- Class II
- classification
- August 21, 2013
- reported
Sourced from official FDA Devices enforcement records. Verify recall #Z-1961-2013 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.
Recall Insight
This FDA Devices action (record #Z-1961-2013) was formally reported on August 21, 2013, with the manufacturer initiating the action on May 10, 2013. It is classified under Moderate severity (Class II), with a current status of Terminated. Biomet 3i, LLC is listed as the recalling firm, operating out of Palm Beach Gardens, FL. Federal records list the affected scope as 33.
The documented reason for this recall is: A small number of outer implant boxes may be mislabeled. The inner tray, containing the implant, is label correctly. This condition, if present and not recognized could potentially result in the dental implant not being… Distribution data in the federal record shows the product reached: Distribution to the state of Massachusetts, and the foreign countries of Australia, Belgium, Spain, Denmark, France, Luxembourg, Switzerland, Germany, Bonaire, Sweden, and Italy.. Distribution scope directly affects the consumer exposure window and determines whether a recall remains regional or escalates into a nationwide advisory.
Within the same product category the archive holds 6 closely related recalls, 3 from FDA Devices - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.
Medical Devices recalls over time
Where this recall sits in its category - 40,322 medical devices recalls on record
Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.
Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.
Affected scope
33
Related Recalls
6
3 from same agency
Product description
Biomet 3i Dental Implant, Non-Platform Switched Parallel Walled Implant 5mm (D) x 13mm (L)
Reason for recall
A small number of outer implant boxes may be mislabeled. The inner tray, containing the implant, is label correctly. This condition, if present and not recognized could potentially result in the dental implant not being able to be placed into the osteotomy or seated to the desired depth if placement is attempted.
Recall Profile
| Attribute | Value |
|---|---|
| Agency | U.S. Food and Drug Administration |
| Severity class | Moderate (Class II) |
| Status | Terminated |
| Recall number | Z-1961-2013 |
| Date reported | August 21, 2013 |
| Date initiated | May 10, 2013 |
| Recalling firm | Biomet 3i, LLC |
| Firm location | Palm Beach Gardens, FL |
| Affected scope | 33 |
| Distribution | Distribution to the state of Massachusetts, and the foreign countries of Australia, Belgium, Spain, Denmark, France, Luxembourg, Switzerland, Germany, Bonaire, Sweden, and Italy. |
Profile values are sourced directly from the official FDA Devices enforcement record. Source: U.S. Food and Drug Administration.
What to do with this recall
Match your product against the recall record, then act on the agency remedy.
- Check the recall number (Z-1961-2013) and product description against the item you own. Search the archive
- Confirm the current status with FDA Devices before acting, recall details can be updated.
- Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next
This page summarizes the official FDA Devices record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.
Frequently Asked Questions
What product was recalled? ▼
Biomet 3i Dental Implant, Non-Platform Switched Parallel Walled Implant 5mm (D) x 13mm (L). Recalled by Biomet 3i, LLC. Units affected: 33.
Why was this product recalled? ▼
A small number of outer implant boxes may be mislabeled. The inner tray, containing the implant, is label correctly. This condition, if present and not recognized could potentially result in the dental implant not being able to be placed into the osteotomy or seated to the desired depth if placement is attempted.
Which agency issued this recall? ▼
This recall was issued by the FDA Devices on August 21, 2013. Severity: Moderate. Recall number: Z-1961-2013.
Where was the recalled product distributed? ▼
Distribution: Distribution to the state of Massachusetts, and the foreign countries of Australia, Belgium, Spain, Denmark, France, Luxembourg, Switzerland, Germany, Bonaire, Sweden, and Italy..
How do I check if my product is affected by a recall? ▼
Check the product description and recall number (Z-1961-2013) against your product. Visit the official FDA Devices website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
Should I stop using a recalled medication or medical device? ▼
Do not stop using a recalled medication or device without consulting your healthcare provider first, as abruptly discontinuing treatment could pose its own health risks. Your doctor can advise on alternatives or whether the recall applies to your specific product lot. Check the recall number and lot information against your product packaging.
Nearby Recalls in This Category
Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.
CPSC Moderate
Rowenta Recalls Cordless Vacuum Cleaners Due to Risk of Serious Injury from Fire and Burn Hazards
· 2026-07-02
CPSC Moderate
Daikin Comfort Technologies Manufacturing Recalls Amana Air Conditioners and Heat Pumps Due to Risk of Serious Injury f…
· 2026-06-25
CPSC Moderate
Arizer Solo III Portable Vaporizers Recalled Due to Fire and Burn Hazards; Risk of Serious Injury or Death; Imported by…
· 2026-06-18
FDA Devices Moderate
GE HealthCare TRADE IN CARESCAPE TELEMETRY SERVER ARK-2250L - NORTH AMERICA, REF #5697603-902, Product Code KSA; used i…
GE Medical Systems Information Technologies Inc · 2026-06-03
FDA Devices Critical
Medline kits containing Huons Co. Bupivacaine HCL in Dextrose Injection, USP, labeled as: 1) BLOCK TRAY, Medline Kit…
Medline Industries, LP · 2026-06-03
Compare this recall with Rowenta Recalls Cordless Vacuum Cleaners Due to Risk of Ser… →
Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: FDA Devices, reported August 21, 2013. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.