PlainRecalls
CriticalClass IOngoing

FDA Devices recall · Reported July 2, 2025

MicroMyst Applicator, Box of 5. Consisting of a multilumen applicator and filtered line for use with the Integra Flow Source for the controlled application of two liquids.

Lack of sterility assurance.

Recall #
Z-1961-2025
Affected scope
4,882 units
Initiated
May 23, 2025
Verify with FDA Devices →
View my saved recalls

Integra LifeSciences Corp. (NeuroSciences) recalled MicroMyst Applicator, Box of 5. Consisting of a multilumen applicator and filtered line f… — a critical-severity action.

MicroMyst Applicator, Box of 5. Consisting of a multilumen applicator and filtered line f… was recalled by Integra LifeSciences Corp. (NeuroSciences) in July 2, 2025. Reason: Lack of sterility assurance.. Check the official notice for the remedy. Verify recall #Z-1961-2025 with the FDA Devices before acting.

The recall

Integra LifeSciences Corp. (NeuroSciences) issued this critical-severity FDA Devices recall — Lack of sterility assurance..

Critical
severity level
5K units
affected scope
Class I
classification
July 2, 2025
reported

Sourced from official FDA Devices enforcement records. Verify recall #Z-1961-2025 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.

Recall Insight

This FDA Devices action (record #Z-1961-2025) was formally reported on July 2, 2025, with the manufacturer initiating the action on May 23, 2025. It is classified under Critical severity (Class I), with a current status of Ongoing. Integra LifeSciences Corp. (NeuroSciences) is listed as the recalling firm, operating out of Princeton, NJ. Federal records list the affected scope as 4,882 units.

The documented reason for this recall is: Lack of sterility assurance. Distribution data in the federal record shows the product reached: Worldwide distribution - US Nationwide and the countries of Taiwan (Province of China), Viet Nam, Brazil, Trinidad and Tobago, El Salvador, South Korea, Peru, Canada, Australia, New Zealand, Belgium, France, Germany, Ir…. Distribution scope directly affects the consumer exposure window and determines whether a recall remains regional or escalates into a nationwide advisory.

Within the same product category the archive holds 6 closely related recalls, 6 from FDA Devices — clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.

Medical Devices recalls over time

Where this recall sits in its category — 40,409 medical devices recalls on record

-1,00001,0002,0003,0004,0005,000 20052008201120142017202020232026 1,243

Where this recall sits in the database

Severity2366872097High severity (most serious)Moderate severityLow severity
Where this recall sits in the database

Of 100,165 recalls in the database, 23,668 are high severity, 72,097 moderate, and 4,400 low. This recall is classified high severity.

Counts reflect market size and reporting activity, not inherent danger — we do not rank products by risk from raw recall volume.

Severity

Critical

Affected scope

4,882 units

Related Recalls

6

6 from same agency

Product description

MicroMyst Applicator, Box of 5. Consisting of a multilumen applicator and filtered line for use with the Integra Flow Source for the controlled application of two liquids.

Reason for recall

Lack of sterility assurance.

Recall Profile

Structured summary of the FDA Devices recall record
Attribute Value
Agency U.S. Food and Drug Administration
Severity class Critical (Class I)
Status Ongoing
Recall number Z-1961-2025
Date reported July 2, 2025
Date initiated May 23, 2025
Recalling firm Integra LifeSciences Corp. (NeuroSciences)
Firm location Princeton, NJ
Affected scope 4,882 units
Distribution Worldwide distribution - US Nationwide and the countries of Taiwan (Province of China), Viet Nam, Brazil, Trinidad and Tobago, El Salvador, South Korea, Peru, Canada, Australia, New Zealand, Belgium, France, Germany, Ireland, Israel, Italy…

Profile values are sourced directly from the official FDA Devices enforcement record. Source: U.S. Food and Drug Administration.

Scale of Impact

4,882 units units affected — limited or regional distribution scale.

Regional (<10K units) ✓ This recall
Multi-state (10K – 100K units)
Large-scale (100K – 1M units)
Massive (≥1M units)

Bracket cutoffs follow federal recall-disclosure conventions; bar widths scale linearly within each bracket. Source: PlainRecalls analysis of U.S. Food and Drug Administration filings.

What to do with this recall

Match your product against the recall record, then act on the agency remedy.

  • Check the recall number (Z-1961-2025) and product description against the item you own. Search the archive
  • Confirm the current status with FDA Devices before acting — recall details can be updated.
  • This is a Class I (high-risk) recall — stop using the product immediately and follow the disposal or return instructions. What to do next

This page summarizes the official FDA Devices record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.

Frequently Asked Questions

What product was recalled?
MicroMyst Applicator, Box of 5. Consisting of a multilumen applicator and filtered line for use with the Integra Flow Source for the controlled application of two liquids.. Recalled by Integra LifeSciences Corp. (NeuroSciences). Units affected: 4,882 units.
Why was this product recalled?
Lack of sterility assurance.
Which agency issued this recall?
This recall was issued by the FDA Devices on July 2, 2025. Severity: Critical. Recall number: Z-1961-2025.
Where was the recalled product distributed?
Distribution: Worldwide distribution - US Nationwide and the countries of Taiwan (Province of China), Viet Nam, Brazil, Trinidad and Tobago, El Salvador, South Korea, Peru, Canada, Australia, New Zealand, Belgium, France, Germany, Ireland, Israel, Italy, Kenya, Slovenia, South Africa, Spain, Sweden, Switzerland and United Kingdom..
How do I check if my product is affected by a recall?
Check the product description and recall number (Z-1961-2025) against your product. Visit the official FDA Devices website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
Should I stop using a recalled medication or medical device?
Do not stop using a recalled medication or device without consulting your healthcare provider first, as abruptly discontinuing treatment could pose its own health risks. Your doctor can advise on alternatives or whether the recall applies to your specific product lot. Check the recall number and lot information against your product packaging.

Nearby Recalls in This Category

Other recalls in the same product category — useful for spotting patterns across the same defect class or manufacturer.

Compare this recall with GE HealthCare TRADE IN CARESCAPE TELEMETRY SERVER ARK-2250L… →

Data Sources

Source: FDA, CPSC, and NHTSA federal recall databases. This recall: FDA Devices, reported July 2, 2025.

  • Source: FDA — Food and Drug Administration, openFDA Enforcement API (food, drug, and medical device recalls)
  • Source: CPSC — Consumer Product Safety Commission Recalls API (consumer product recalls and hazards)
  • Source: NHTSA — National Highway Traffic Safety Administration Recalls API (vehicle safety recalls)

Recall information is sourced from official federal agency databases. Always verify recall details with the issuing agency for the most current status. This information is for research and awareness purposes only.

Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records — no number is typed in by an editor. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of June 2026.