PlainRecalls
ModerateClass IIOngoing

FDA Devices recall · Reported August 28, 2024

Vial Decanter, REF 2006S. Packaged on a form, fill and seal machine with a poly/Tyvek material then placed 50 products to a case (cs).

During sterile barrier testing performed on the decanter product line, the samples were identified to have pin holes and tears in the packaging film.

Recall #
Z-2642-2024
Affected scope
30,435 cases (1,521,750 units)
Initiated
June 3, 2024
Verify with FDA Devices →
View my saved recalls

Microtek Medical Inc. recalled Vial Decanter, REF 2006S. Packaged on a form, fill and seal machine with a poly/Tyvek mat… - a moderate-severity action.

Vial Decanter, REF 2006S. Packaged on a form, fill and seal machine with a poly/Tyvek mat… was recalled by Microtek Medical Inc. in August 28, 2024. Reason: During sterile barrier testing performed on the decanter product line, the samples were identified to have pi…. Check the official notice for the remedy. Verify recall #Z-2642-2024 with the FDA Devices before acting.

The recall

Microtek Medical Inc. issued this moderate-severity FDA Devices recall-During sterile barrier testing performed on the decanter product line, the samples were identified to have pi….

Moderate
severity level
Class II
classification
August 28, 2024
reported

Sourced from official FDA Devices enforcement records. Verify recall #Z-2642-2024 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.

Recall Insight

This recall's affected scope, documented in the Recall Profile below, stays within a single-region or limited-distribution footprint. Distribution scope (see Distribution below) directly affects the consumer exposure window and determines whether a recall remains regional or escalates into a nationwide advisory.

Within the same product category the archive holds 6 closely related recalls, 6 from FDA Devices - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.

Medical Devices recalls over time

Where this recall sits in its category - 41,021 medical devices recalls on record

01,0002,0003,0004,000 20052008201120142017202020232026 1,947
Severity1906864652High severity (most serious)Moderate severityLow severity
Where this agency-classified recall sits among FDA Class I/II/III notices

Of 88,244 recalls with an agency hazard classification, 19,068 are high severity, 64,652 moderate, and 4,524 low. A further 16,179 CPSC/NHTSA recalls have no agency class and are excluded from this split. This recall is classified moderate severity.

Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.

Product description

Vial Decanter, REF 2006S. Packaged on a form, fill and seal machine with a poly/Tyvek material then placed 50 products to a case (cs).

Reason for recall

During sterile barrier testing performed on the decanter product line, the samples were identified to have pin holes and tears in the packaging film.

Recall Profile

Structured summary of the FDA Devices recall record
Attribute Value
Agency U.S. Food and Drug Administration
Severity class Moderate (Class II)
Status Ongoing
Recall number Z-2642-2024
Date reported August 28, 2024
Date initiated June 3, 2024
Recalling firm Microtek Medical Inc.
Firm location Saint Paul, MN
Affected scope 30,435 cases (1,521,750 units)
Distribution Distributed nationwide and internationally to Canada, Mexico, New Zealand, Belize, and Hong Kong.

Profile values are sourced directly from the official FDA Devices enforcement record. Source: U.S. Food and Drug Administration.

What to do with this recall

Match your product against the recall record, then act on the agency remedy.

  • Check the recall number (Z-2642-2024) and product description against the item you own. Search the archive
  • Confirm the current status with FDA Devices before acting, recall details can be updated.
  • Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next

This page summarizes the official FDA Devices record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.

Frequently Asked Questions

What product was recalled?
Vial Decanter, REF 2006S. Packaged on a form, fill and seal machine with a poly/Tyvek material then placed 50 products to a case (cs).. Recalled by Microtek Medical Inc.. Units affected: 30,435 cases (1,521,750 units).
Why was this product recalled?
During sterile barrier testing performed on the decanter product line, the samples were identified to have pin holes and tears in the packaging film.
Which agency issued this recall?
This recall was issued by the FDA Devices on August 28, 2024. Severity: Moderate. Recall number: Z-2642-2024.
Where was the recalled product distributed?
Distribution: Distributed nationwide and internationally to Canada, Mexico, New Zealand, Belize, and Hong Kong..
Should I stop using a recalled medication or medical device?
Do not stop using a recalled medication or device without consulting your healthcare provider first, as abruptly discontinuing treatment could pose its own health risks. Your doctor can advise on alternatives or whether the recall applies to your specific product lot. Check the recall number and lot information against your product packaging.

Nationwide recalls with similar severity or category timing

Drug and device notices outside this firm and state, matched by severity timing and product category.

Compare this recall with GORE VIABIL Short Wire Biliary Endoprosthesis, Model No. VS… → · All Medical Devices recalls

This recall: FDA Devices, reported August 28, 2024. Severity classes follow each agency's own taxonomy; related-recall context is computed across the full archive.

Methodology · Corrections · Archive as of August 2026