Severity
Moderate
ModerateActive
CPSC recall · Reported October 17, 2000
CPSC, Power Tool Manufacturers Announce Recall of Various Power Tools
The switches on these power tools, which were manufactured by Eaton Corp, of Cleveland, Ohio, can stick. The tools can continue to operate after the trigger has been released, pos…
Compiled from official public sources by the editorial team.
Verify with CPSC →
Eaton Corp., of Cleveland, Ohio recalled S-B Power Tools Co., of Chicago, Ill., is recalling Bosch-brand drills; Makita U.S.A. Inc… - a moderate-severity action.
CPSC, Power Tool Manufacturers Announce Recall of Various Power Tools was recalled by Eaton Corp., of Cleveland, Ohio in October 17, 2000. Reason: The switches on these power tools, which were manufactured by Eaton Corp, of Cleveland, Ohio, can stick. The …. Remedy: Consumers should stop using these power tools immediately and contact the tool manufactur…. Verify recall #01014 with the CPSC before acting.
The recall
Eaton Corp., of Cleveland, Ohio issued this moderate-severity CPSC recall-The switches on these power tools, which were manufactured by Eaton Corp, of Cleveland, Ohio, can stick. The ….
- Moderate
- severity level
- October 17, 2000
- reported
Sourced from official CPSC enforcement records. Verify recall #01014 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.
Recall Insight
This CPSC action (record #01014) was formally reported on October 17, 2000. It is classified under Moderate severity, with a current status of Active. Eaton Corp., of Cleveland, Ohio is listed as the recalling firm. Federal records list the affected scope as About 180,000.
The documented reason for this recall is: The switches on these power tools, which were manufactured by Eaton Corp, of Cleveland, Ohio, can stick. The tools can continue to operate after the trigger has been released, posing a risk of injury to consumers. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Consumers should stop using these power tools immediately and contact the tool manufacturer to receive a free replacement tool or tool repair. - consumers holding this product should act on that instruction rather than relying on general guidance.
Within the same product category the archive holds 6 closely related recalls, 6 from CPSC - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.
Household Products recalls over time
Where this recall sits in its category - 3,056 household products recalls on record
Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.
Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.
Affected scope
About 180,000
Related Recalls
6
6 from same agency
Product description
S-B Power Tools Co., of Chicago, Ill., is recalling Bosch-brand drills; Makita U.S.A. Inc., of La Mirada, Calif., is recalling Makita-brand rotary hammers, drills and screwdrivers; and Milwaukee Electric Tool Corp., of Brookfield, Wis., is recalling Milwaukee Electric Tool-brand band saws. The following chart lists the power tools included in this recall. The model number can be found written on the power tool: Tool Manufacturer Recalled Tools Model Numbers of Recalled Tools Hotline Number S-B Power Tool Co. Bosch-brand drills 1011VSR, 1012VSR, 1013VSR, 1014VSR, 1030VSR, 1031VSR, 1032VSR, 1033VSR, 1034VSR, 1035VSR (800) 661-5398 Makita U.S.A. Inc. Rotary hammers, hammer drills, drills & screwdrivers HR2410, HR2420, HP2040, HP1501K, 6407, 6408, 6408K, 6410, 6821 (800) 462-5482 Milwaukee Electric Tool Corp. Variable speed band saws 6227, 6230, 6232-6, and 6234 (800) 729-3878
Reason for recall
The switches on these power tools, which were manufactured by Eaton Corp, of Cleveland, Ohio, can stick. The tools can continue to operate after the trigger has been released, posing a risk of injury to consumers.
Remedy, what to do
Consumers should stop using these power tools immediately and contact the tool manufacturer to receive a free replacement tool or tool repair.
Recall Profile
| Attribute | Value |
|---|---|
| Agency | U.S. Consumer Product Safety Commission |
| Severity class | Moderate |
| Status | Active |
| Recall number | 01014 |
| Date reported | October 17, 2000 |
| Date initiated | October 17, 2000 |
| Recalling firm | Eaton Corp., of Cleveland, Ohio |
| Affected scope | About 180,000 |
| Distribution | Not disclosed |
| Official source | CPSC notice → |
Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.
What to do with this recall
Consumers should stop using these power tools immediately and contact the tool manufacturer to receive a free replacement tool or…
- Check the recall number (01014) and product description against the item you own. Search the archive
- Confirm the current status and remedy on the official CPSC notice before acting. CPSC notice
- Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next
This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.
Frequently Asked Questions
What product was recalled? ▼
S-B Power Tools Co., of Chicago, Ill., is recalling Bosch-brand drills; Makita U.S.A. Inc., of La Mirada, Calif., is recalling Makita-brand rotary hammers, drills and screwdrivers; and Milwaukee Electric Tool Corp., of Brookfield, Wis., is recalling Milwaukee Electric Tool-brand band saws. The following chart lists the power tools included in this recall. The model number can be found written on the power tool: Tool Manufacturer Recalled Tools Model Numbers of Recalled Tools Hotline Number S-B Power Tool Co. Bosch-brand drills 1011VSR, 1012VSR, 1013VSR, 1014VSR, 1030VSR, 1031VSR, 1032VSR, 1033VSR, 1034VSR, 1035VSR (800) 661-5398 Makita U.S.A. Inc. Rotary hammers, hammer drills, drills & screwdrivers HR2410, HR2420, HP2040, HP1501K, 6407, 6408, 6408K, 6410, 6821 (800) 462-5482 Milwaukee Electric Tool Corp. Variable speed band saws 6227, 6230, 6232-6, and 6234 (800) 729-3878. Recalled by Eaton Corp., of Cleveland, Ohio. Units affected: About 180,000.
Why was this product recalled? ▼
The switches on these power tools, which were manufactured by Eaton Corp, of Cleveland, Ohio, can stick. The tools can continue to operate after the trigger has been released, posing a risk of injury to consumers.
What should consumers do? ▼
Consumers should stop using these power tools immediately and contact the tool manufacturer to receive a free replacement tool or tool repair.
Which agency issued this recall? ▼
This recall was issued by the CPSC on October 17, 2000. Severity: Moderate. Recall number: 01014.
How do I check if my product is affected by a recall? ▼
Check the product description and recall number (01014) against your product. Visit the official CPSC website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product? ▼
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.
Nearby Recalls in This Category
Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.
CPSC Moderate
Cooper Lighting Recalls Metalux Optimized High Bay LED Light Fixtures Due to Fire Hazard
Cooper Lighting, LLC, of Peachtree City, Georgia · 2026-07-02
CPSC Moderate
Winco Fireworks International Recalls Roman Candles 8 Shot Fireworks Due to Risk of Serious Injury from Explosion and B…
· 2026-07-02
CPSC Moderate
Winco Fireworks International Recalls Unity 7 Shot 200 Gram Aerial Cake Fireworks Due to Risk of Serious Injury from Ex…
· 2026-07-02
CPSC Moderate
Kith Retail Recalls Children's Loungewear Sets Due to Risk of Serious Injury from Burn Hazard; Violate Mandatory Standa…
· 2026-06-25
CPSC Moderate
Southern Telecom Expands Recall of Lomi Waxing Kits Due to Risk of Serious Injury or Death from Fire and Burn Hazards; …
· 2026-06-25
Compare this recall with Cooper Lighting Recalls Metalux Optimized High Bay LED Ligh… →
Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: CPSC, reported October 17, 2000. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.