PlainRecalls
ModerateActive

CPSC recall · Reported August 20, 2001

CPSC, World Industries Announce Recall of Skateboard Helmets

These helmets failed impact testing required under CPSC's Safety Standard for Bicycle Helmets. Riders wearing these helmets are not adequately protected from falls and could suffe…

Recall #
01220
Affected scope
10,000
Compiled from official public sources by the editorial team.
Verify with CPSC →
View my saved recalls

The CPSC recalled The recalled helmets come in black, blue and white and have the name "World Industries" p… - a moderate-severity action.

CPSC, World Industries Announce Recall of Skateboard Helmets was recalled and listed by the CPSC in August 20, 2001. Reason: These helmets failed impact testing required under CPSC's Safety Standard for Bicycle Helmets. Riders wearing…. Remedy: Consumers should stop using these helmets immediately and return them to the stores where…. Verify recall #01220 with the CPSC before acting.

The recall

issued this moderate-severity CPSC recall-These helmets failed impact testing required under CPSC's Safety Standard for Bicycle Helmets. Riders wearing….

Moderate
severity level
10K units
affected scope
August 20, 2001
reported

Sourced from official CPSC enforcement records. Verify recall #01220 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.

Recall Insight

This CPSC action (record #01220) was formally reported on August 20, 2001. It is classified under Moderate severity, with a current status of Active. The recalling firm is not specified in the federal record. Federal records list the affected scope as 10,000.

The documented reason for this recall is: These helmets failed impact testing required under CPSC's Safety Standard for Bicycle Helmets. Riders wearing these helmets are not adequately protected from falls and could suffer head injuries or death. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Consumers should stop using these helmets immediately and return them to the stores where purchased, for a full refund. - consumers holding this product should act on that instruction rather than relying on general guidance.

Within the same product category the archive holds 6 closely related recalls, 6 from CPSC - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.

Vehicles recalls over time

Where this recall sits in its category - 7,642 vehicles recalls on record

0200400600 20052008201120142017202020232026 82
Severity2487872426High severity (most serious)Moderate severityLow severity
Where this recall sits in the database

Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.

Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.

Severity

Moderate

Affected scope

10,000

Related Recalls

6

6 from same agency

Product description

The recalled helmets come in black, blue and white and have the name "World Industries" printed on the chin strap, the back of the helmet, and the inside padding. On the sides of the helmet, yellow and blue cartoon characters can be seen shooting fire from a gun. Two labels inside of the helmet read in part, "Certified CPSC 16CFR1203," "Warning This Helmet Is Not For Motor Vehicle" and "Made in China."

Reason for recall

These helmets failed impact testing required under CPSC's Safety Standard for Bicycle Helmets. Riders wearing these helmets are not adequately protected from falls and could suffer head injuries or death.

Remedy, what to do

Consumers should stop using these helmets immediately and return them to the stores where purchased, for a full refund.

Recall Profile

Structured summary of the CPSC recall record
Attribute Value
Agency U.S. Consumer Product Safety Commission
Severity class Moderate
Status Active
Recall number 01220
Date reported August 20, 2001
Date initiated August 20, 2001
Recalling firm Not disclosed
Affected scope 10,000
Distribution Not disclosed
Official source CPSC notice →

Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.

Scale of Impact

10,000 units affected - limited or regional distribution scale.

Regional (<10K units) -
Multi-state (10K – 100K units) ✓ This recall
Large-scale (100K – 1M units) -
Massive (≥1M units) -

Bracket cutoffs follow federal recall-disclosure conventions; bar widths scale linearly within each bracket. Source: PlainRecalls analysis of U.S. Consumer Product Safety Commission filings.

What to do with this recall

Consumers should stop using these helmets immediately and return them to the stores where purchased, for a full refund.

  • Check the recall number (01220) and product description against the item you own. Search the archive
  • Confirm the current status and remedy on the official CPSC notice before acting. CPSC notice
  • Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next

This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.

Frequently Asked Questions

What product was recalled?
The recalled helmets come in black, blue and white and have the name "World Industries" printed on the chin strap, the back of the helmet, and the inside padding. On the sides of the helmet, yellow and blue cartoon characters can be seen shooting fire from a gun. Two labels inside of the helmet read in part, "Certified CPSC 16CFR1203," "Warning This Helmet Is Not For Motor Vehicle" and "Made in China.". Units affected: 10,000.
Why was this product recalled?
These helmets failed impact testing required under CPSC's Safety Standard for Bicycle Helmets. Riders wearing these helmets are not adequately protected from falls and could suffer head injuries or death.
What should consumers do?
Consumers should stop using these helmets immediately and return them to the stores where purchased, for a full refund.
Which agency issued this recall?
This recall was issued by the CPSC on August 20, 2001. Severity: Moderate. Recall number: 01220.
How do I check if my product is affected by a recall?
Check the product description and recall number (01220) against your product. Visit the official CPSC website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product?
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.

Nearby Recalls in This Category

Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.

Compare this recall with Yamazuki Recalls Youth All-Terrain Vehicles (ATVs) Due to R… →

Browse all Vehicles recalls →

Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: CPSC, reported August 20, 2001. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.