PlainRecalls
ModerateActive

CPSC recall · Reported August 15, 2001

CPSC, Cannondale Corp. Announce Recall of ATVs

The ball joints in the A-arm assembly on these vehicles can break, which could cause the front wheels to lose stability. Also, the tie-rod assemblies on these vehicles can break o…

Recall #
01517
Affected scope
About 630
Compiled from official public sources by the editorial team.
Verify with CPSC →
View my saved recalls

Cannondale Corp., of Bethel, Conn. recalled The Cannondale "FX 400" and Cannondale "Cannibal" are four-wheeled all-terrain vehicles (… - a moderate-severity action.

CPSC, Cannondale Corp. Announce Recall of ATVs was recalled by Cannondale Corp., of Bethel, Conn. in August 15, 2001. Reason: The ball joints in the A-arm assembly on these vehicles can break, which could cause the front wheels to lose…. Remedy: Consumers should stop riding these ATVs and contact their local Cannondale dealer to sche…. Verify recall #01517 with the CPSC before acting.

The recall

Cannondale Corp., of Bethel, Conn. issued this moderate-severity CPSC recall-The ball joints in the A-arm assembly on these vehicles can break, which could cause the front wheels to lose….

Moderate
severity level
August 15, 2001
reported

Sourced from official CPSC enforcement records. Verify recall #01517 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.

Recall Insight

This CPSC action (record #01517) was formally reported on August 15, 2001. It is classified under Moderate severity, with a current status of Active. Cannondale Corp., of Bethel, Conn. is listed as the recalling firm. Federal records list the affected scope as About 630.

The documented reason for this recall is: The ball joints in the A-arm assembly on these vehicles can break, which could cause the front wheels to lose stability. Also, the tie-rod assemblies on these vehicles can break or work loose, and damage either the stee… Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Consumers should stop riding these ATVs and contact their local Cannondale dealer to schedule an appointment to have the ball joints and tie-rod assemblies replaced free of charge. If possible, consu… - consumers holding this product should act on that instruction rather than relying on general guidance.

Within the same product category the archive holds 6 closely related recalls, 6 from CPSC - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.

Vehicles recalls over time

Where this recall sits in its category - 7,642 vehicles recalls on record

0200400600 20052008201120142017202020232026 82
Severity2487872426High severity (most serious)Moderate severityLow severity
Where this recall sits in the database

Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.

Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.

Severity

Moderate

Affected scope

About 630

Related Recalls

6

6 from same agency

Product description

The Cannondale "FX 400" and Cannondale "Cannibal" are four-wheeled all-terrain vehicles (ATVs). The FX 400 and Cannibal models have "Cannondale" and "FX 400" or "Cannibal" on both sides of the vehicle. Cannondale appears on the rear fenders and bodywork of the vehicle; "Cannibal" appears roughly inboard of the operator's knee location; "FX400" appears on the seat of the vehicle.

Reason for recall

The ball joints in the A-arm assembly on these vehicles can break, which could cause the front wheels to lose stability. Also, the tie-rod assemblies on these vehicles can break or work loose, and damage either the steering column plate end or knuckle. If the ball joints or a tie rod end breaks, the operator can lose control of the vehicle during use, and crash.

Remedy, what to do

Consumers should stop riding these ATVs and contact their local Cannondale dealer to schedule an appointment to have the ball joints and tie-rod assemblies replaced free of charge. If possible, consumers should contact the dealer where they purchased their ATV. Owners of these ATVs were directly notified about this recall.

Recall Profile

Structured summary of the CPSC recall record
Attribute Value
Agency U.S. Consumer Product Safety Commission
Severity class Moderate
Status Active
Recall number 01517
Date reported August 15, 2001
Date initiated August 15, 2001
Recalling firm Cannondale Corp., of Bethel, Conn.
Affected scope About 630
Distribution Not disclosed
Official source CPSC notice →

Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.

What to do with this recall

Consumers should stop riding these ATVs and contact their local Cannondale dealer to schedule an appointment to have the ball joi…

  • Check the recall number (01517) and product description against the item you own. Search the archive
  • Confirm the current status and remedy on the official CPSC notice before acting. CPSC notice
  • Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next

This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.

Frequently Asked Questions

What product was recalled?
The Cannondale "FX 400" and Cannondale "Cannibal" are four-wheeled all-terrain vehicles (ATVs). The FX 400 and Cannibal models have "Cannondale" and "FX 400" or "Cannibal" on both sides of the vehicle. Cannondale appears on the rear fenders and bodywork of the vehicle; "Cannibal" appears roughly inboard of the operator's knee location; "FX400" appears on the seat of the vehicle.. Recalled by Cannondale Corp., of Bethel, Conn.. Units affected: About 630.
Why was this product recalled?
The ball joints in the A-arm assembly on these vehicles can break, which could cause the front wheels to lose stability. Also, the tie-rod assemblies on these vehicles can break or work loose, and damage either the steering column plate end or knuckle. If the ball joints or a tie rod end breaks, the operator can lose control of the vehicle during use, and crash.
What should consumers do?
Consumers should stop riding these ATVs and contact their local Cannondale dealer to schedule an appointment to have the ball joints and tie-rod assemblies replaced free of charge. If possible, consumers should contact the dealer where they purchased their ATV. Owners of these ATVs were directly notified about this recall.
Which agency issued this recall?
This recall was issued by the CPSC on August 15, 2001. Severity: Moderate. Recall number: 01517.
How do I check if my product is affected by a recall?
Check the product description and recall number (01517) against your product. Visit the official CPSC website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product?
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.

Nearby Recalls in This Category

Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.

Compare this recall with Yamazuki Recalls Youth All-Terrain Vehicles (ATVs) Due to R… →

Browse all Vehicles recalls →

Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: CPSC, reported August 15, 2001. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.