Severity
Moderate
ModerateActive
CPSC recall · Reported January 13, 2005
CPSC, Emerson Tool Co. Announce Recall to Repair Wet/Dry Vacuums
The air intake shield may be missing. Consumers can suffer lacerations if they come into contact with the intake blower wheel.
Compiled from official public sources by the editorial team.
Verify with CPSC →
Emerson Tool Co., of St. Louis, Mo. recalled The Ridgid® 16-gallon 2-in-1 Blower Vac, Model WD16650, has light gray drums with orange … - a moderate-severity action.
CPSC, Emerson Tool Co. Announce Recall to Repair Wet/Dry Vacuums was recalled by Emerson Tool Co., of St. Louis, Mo. in January 13, 2005. Reason: The air intake shield may be missing. Consumers can suffer lacerations if they come into contact with the int…. Remedy: If the air intake shield is missing, consumers should stop using their vacuum and contact…. Verify recall #05084 with the CPSC before acting.
The recall
Emerson Tool Co., of St. Louis, Mo. issued this moderate-severity CPSC recall-The air intake shield may be missing. Consumers can suffer lacerations if they come into contact with the int….
- Moderate
- severity level
- January 13, 2005
- reported
Sourced from official CPSC enforcement records. Verify recall #05084 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.
Recall Insight
This CPSC action (record #05084) was formally reported on January 13, 2005. It is classified under Moderate severity, with a current status of Active. Emerson Tool Co., of St. Louis, Mo. is listed as the recalling firm. Federal records list the affected scope as About 6,500.
The documented reason for this recall is: The air intake shield may be missing. Consumers can suffer lacerations if they come into contact with the intake blower wheel. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: If the air intake shield is missing, consumers should stop using their vacuum and contact the firm for a free repair kit. - consumers holding this product should act on that instruction rather than relying on general guidance.
Within the same product category the archive holds 6 closely related recalls, 6 from CPSC - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.
Household Products recalls over time
Where this recall sits in its category - 3,056 household products recalls on record
Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.
Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.
Affected scope
About 6,500
Related Recalls
6
6 from same agency
Product description
The Ridgid® 16-gallon 2-in-1 Blower Vac, Model WD16650, has light gray drums with orange lids, gray power heads, and black wheels. The recalled units have the model number and a serial number from 04104C through 04114C located on a label on the side of the power head. "Ridgid® 2 in 1 Blower Vac" is written on the front of the units.
Reason for recall
The air intake shield may be missing. Consumers can suffer lacerations if they come into contact with the intake blower wheel.
Remedy, what to do
If the air intake shield is missing, consumers should stop using their vacuum and contact the firm for a free repair kit.
Recall Profile
| Attribute | Value |
|---|---|
| Agency | U.S. Consumer Product Safety Commission |
| Severity class | Moderate |
| Status | Active |
| Recall number | 05084 |
| Date reported | January 13, 2005 |
| Date initiated | January 13, 2005 |
| Recalling firm | Emerson Tool Co., of St. Louis, Mo. |
| Affected scope | About 6,500 |
| Distribution | Not disclosed |
| Official source | CPSC notice → |
Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.
What to do with this recall
If the air intake shield is missing, consumers should stop using their vacuum and contact the firm for a free repair kit.
- Check the recall number (05084) and product description against the item you own. Search the archive
- Confirm the current status and remedy on the official CPSC notice before acting. CPSC notice
- Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next
This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.
Frequently Asked Questions
What product was recalled? ▼
The Ridgid® 16-gallon 2-in-1 Blower Vac, Model WD16650, has light gray drums with orange lids, gray power heads, and black wheels. The recalled units have the model number and a serial number from 04104C through 04114C located on a label on the side of the power head. "Ridgid® 2 in 1 Blower Vac" is written on the front of the units.. Recalled by Emerson Tool Co., of St. Louis, Mo.. Units affected: About 6,500.
Why was this product recalled? ▼
The air intake shield may be missing. Consumers can suffer lacerations if they come into contact with the intake blower wheel.
What should consumers do? ▼
If the air intake shield is missing, consumers should stop using their vacuum and contact the firm for a free repair kit.
Which agency issued this recall? ▼
This recall was issued by the CPSC on January 13, 2005. Severity: Moderate. Recall number: 05084.
How do I check if my product is affected by a recall? ▼
Check the product description and recall number (05084) against your product. Visit the official CPSC website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product? ▼
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.
Nearby Recalls in This Category
Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.
CPSC Moderate
Cooper Lighting Recalls Metalux Optimized High Bay LED Light Fixtures Due to Fire Hazard
Cooper Lighting, LLC, of Peachtree City, Georgia · 2026-07-02
CPSC Moderate
Winco Fireworks International Recalls Roman Candles 8 Shot Fireworks Due to Risk of Serious Injury from Explosion and B…
· 2026-07-02
CPSC Moderate
Winco Fireworks International Recalls Unity 7 Shot 200 Gram Aerial Cake Fireworks Due to Risk of Serious Injury from Ex…
· 2026-07-02
CPSC Moderate
Kith Retail Recalls Children's Loungewear Sets Due to Risk of Serious Injury from Burn Hazard; Violate Mandatory Standa…
· 2026-06-25
CPSC Moderate
Southern Telecom Expands Recall of Lomi Waxing Kits Due to Risk of Serious Injury or Death from Fire and Burn Hazards; …
· 2026-06-25
Compare this recall with Cooper Lighting Recalls Metalux Optimized High Bay LED Ligh… →
Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: CPSC, reported January 13, 2005. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.