PlainRecalls
ModerateActive

CPSC recall · Reported January 13, 2005

CPSC, Flow International Announce Recall of Snowboard Bindings

The pin used to secure the rear snaplock lever to the bindings can bend or break.

Recall #
05087
Affected scope
About 6,000
Compiled from official public sources by the editorial team.
Verify with CPSC →
View my saved recalls

The CPSC recalled This recall includes 2004 Flow MK series snowboard bindings with model numbers MK03, MK04… - a moderate-severity action.

CPSC, Flow International Announce Recall of Snowboard Bindings was recalled and listed by the CPSC in January 13, 2005. Reason: The pin used to secure the rear snaplock lever to the bindings can bend or break.. Remedy: Consumers should stop using the bindings and return them to a Flow dealer to receive a fr…. Verify recall #05087 with the CPSC before acting.

The recall

issued this moderate-severity CPSC recall-The pin used to secure the rear snaplock lever to the bindings can bend or break..

Moderate
severity level
January 13, 2005
reported

Sourced from official CPSC enforcement records. Verify recall #05087 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.

Recall Insight

This CPSC action (record #05087) was formally reported on January 13, 2005. It is classified under Moderate severity, with a current status of Active. The recalling firm is not specified in the federal record. Federal records list the affected scope as About 6,000.

The documented reason for this recall is: The pin used to secure the rear snaplock lever to the bindings can bend or break. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Consumers should stop using the bindings and return them to a Flow dealer to receive a free replacement axle pin used to secure the rear snaplock lever. Consumers also can contact Flow International … - consumers holding this product should act on that instruction rather than relying on general guidance.

Within the same product category the archive holds 6 closely related recalls, 6 from CPSC - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.

Electronics recalls over time

Where this recall sits in its category - 609 electronics recalls on record

1020304050 20052008201120142017202020232026 36
Severity2487872426High severity (most serious)Moderate severityLow severity
Where this recall sits in the database

Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.

Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.

Severity

Moderate

Affected scope

About 6,000

Related Recalls

6

6 from same agency

Product description

This recall includes 2004 Flow MK series snowboard bindings with model numbers MK03, MK04, MK05 and MK110. The bindings affected by this recall can be identified by the shape of the rear lock lever and the cable adjustment wheel on the side of the baseplate (as shown in the photos). No other bindings are included in this recall.

Reason for recall

The pin used to secure the rear snaplock lever to the bindings can bend or break.

Remedy, what to do

Consumers should stop using the bindings and return them to a Flow dealer to receive a free replacement axle pin used to secure the rear snaplock lever. Consumers also can contact Flow International to have a repair kit with instructions sent by mail.

Recall Profile

Structured summary of the CPSC recall record
Attribute Value
Agency U.S. Consumer Product Safety Commission
Severity class Moderate
Status Active
Recall number 05087
Date reported January 13, 2005
Date initiated January 13, 2005
Recalling firm Not disclosed
Affected scope About 6,000
Distribution Not disclosed
Official source CPSC notice →

Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.

What to do with this recall

Consumers should stop using the bindings and return them to a Flow dealer to receive a free replacement axle pin used to secure t…

  • Check the recall number (05087) and product description against the item you own. Search the archive
  • Confirm the current status and remedy on the official CPSC notice before acting. CPSC notice
  • Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next

This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.

Frequently Asked Questions

What product was recalled?
This recall includes 2004 Flow MK series snowboard bindings with model numbers MK03, MK04, MK05 and MK110. The bindings affected by this recall can be identified by the shape of the rear lock lever and the cable adjustment wheel on the side of the baseplate (as shown in the photos). No other bindings are included in this recall.. Units affected: About 6,000.
Why was this product recalled?
The pin used to secure the rear snaplock lever to the bindings can bend or break.
What should consumers do?
Consumers should stop using the bindings and return them to a Flow dealer to receive a free replacement axle pin used to secure the rear snaplock lever. Consumers also can contact Flow International to have a repair kit with instructions sent by mail.
Which agency issued this recall?
This recall was issued by the CPSC on January 13, 2005. Severity: Moderate. Recall number: 05087.
How do I check if my product is affected by a recall?
Check the product description and recall number (05087) against your product. Visit the official CPSC website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product?
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.

Nearby Recalls in This Category

Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.

Compare this recall with Projecting LED Finger Light Toys Recalled Due to Risk of Se… →

Browse all Electronics recalls →

Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: CPSC, reported January 13, 2005. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.