PlainRecalls

Harris Products Group Recalls Welding Torch Handles Due to Fire Hazard

Reported: July 31, 2014 Initiated: July 31, 2014 #14243 About 13,000 in the U.S. and 350 in Canada units

CPSC recall on July 31, 2014. Classified as Moderate severity. Approximately About 13,000 in the U.S. and 350 in Canada units are affected. The recall was issued because: The torch handles can leak oxygen or fuel, posing a fire hazard.. This recall notice is sourced from official CPSC enforcement records. Below you will find the complete product description, hazard information, remedy instructions, and related recalls from the same manufacturer or product category.

Recall Insight

This CPSC action (record #14243) was formally reported on July 31, 2014. It is classified under Moderate severity, with a current status of Active. The recalling firm is not specified in the federal record. Federal records indicate About 13,000 in the U.S. and 350 in Canada units are affected, placing this recall in the million-unit bracket that typically triggers nationwide consumer alerts and retailer sweeps.

The documented reason for this recall is: The torch handles can leak oxygen or fuel, posing a fire hazard. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Consumers should immediately stop using the recalled torch handles and contact Harris Products Group to receive a free replacement. — consumers holding this product should act on that instruction rather than relying on general guidance.

To put this record in context, PlainRecalls indexes 83,949 recalls across the FDA, CPSC, NHTSA and USDA FSIS going back to 1995. Within the same product category, the database holds 6 closely related recalls, of which 6 were also issued by CPSC. That clustering is a signal — repeated actions in a narrow category often indicate a systemic quality-control issue, a supplier-wide contamination, or a design defect that has propagated across product lines. This recall is roughly 12 years old; older recalls can remain relevant because many units enter resale, rental, and secondary-market channels where the original warning never reaches the end user. Always cross-check the recall number against the official agency page before relying on any summary.

Recall Distribution by Severity Class

Severity1Class I (Critical)Class II (Moderate)Class III (Low)
Recall Distribution by Severity Class

Severity

Moderate

Units Affected

About 13,000 in the U.S. and 350 in Canada

Related Recalls

6

6 from same agency

Product Description

This recall involves two models of torch handles that were sold under the Lincoln Electric® and Harris Products Group® brand names. The torch handles are used in welding. They are gold in color and made out of brass. Welding torch model numbers include 18-5 and 85. Manufacture date codes include FM, GA, GB and GC. The model number and date code are stamped on the torch handle at the end closest to the flame. The torch handles were sold individually and also as part of the following kits. Units with "0" above the word "Harris" and to the right of the rivet head are not included in this recall. Kit Model Number Description 1400299 WELD-HDL,63EWAC-CV A-245-100 1401340 WELD-HDL,85 with C/V 1401346 WELD-HDL,85 LECO 1401347 WELD-HDL,64003055 85 RAD 1401820 WELD-HDL,18-5 4400250 KIT,8525 C DLX RAD 4400259 KIT,8525 CD DLX RAD 4400263 KIT,8525C DLX BRZ OXARC 4403181 KIT,85601-200 DLX P.A.T. RAD 4403184 KIT,8525F-510P DLX LPG RAD 4403208 KIT,MED DUTY WELD WE250A 4403209 KIT,STANDARD DUTY WE200A 4403211 KIT,85601-200 INDUSTRIAL P.A.T.DLX 4403212 KIT,85601-510 DLX CUTWELDER BAG 4403213 KIT,85601-200 PAT STD 4403224 KIT,8525GX-510 DLX STEELWORKER BAG 4403225 KIT,8525GX-300 DLX STEELWORKER BAG 4403226 KIT,8525GX-510 STD STEELWORKER BAG 4403228 KIT,85601-510 DLX EXPERT CLASSIC BAG 4403229 KIT,85601-300 DLX EXPERT CLASSIC BAG 4403239 KIT,85601-300 DLX EXPERT CLASSIC BAG 4403239 KIT,8525FGX-510P LPGw/NX BAG 4403243 KIT,85601-510 STD EXPERT CLASSIC BAG 4403244 KIT,85601-300 STD EXPERT CLASSIC BAG 9101228 VALVE-ASY,VA85 9101230 VALVE-ASY,VA63 KH776 KIT,85601-200 PAT KH777 KIT,85601-510 DLX CUTWELDER BAG KH784 KIT,8525F-510P PROPANE/LPG BAG

Reason for Recall

The torch handles can leak oxygen or fuel, posing a fire hazard.

Remedy

Consumers should immediately stop using the recalled torch handles and contact Harris Products Group to receive a free replacement.

Details

Units Affected
About 13,000 in the U.S. and 350 in Canada

Recall Profile

Structured summary of the CPSC recall record
Attribute Value
Agency U.S. Consumer Product Safety Commission
Severity class Moderate
Status Active
Recall number 14243
Date reported July 31, 2014
Date initiated July 31, 2014
Recalling firm Not disclosed
Units affected About 13,000 in the U.S. and 350 in Canada
Distribution Not disclosed

Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.

Scale of Impact

About 13,000 in the U.S. and 350 in Canada units affected — million-unit bracket.

Regional (<10K units)
Multi-state (10K – 100K units)
Large-scale (100K – 1M units)
Massive (≥1M units) ✓ This recall

Bracket cutoffs follow federal recall-disclosure conventions; bar widths scale linearly within each bracket. Source: PlainRecalls analysis of U.S. Consumer Product Safety Commission filings.

Frequently Asked Questions

What product was recalled?
This recall involves two models of torch handles that were sold under the Lincoln Electric® and Harris Products Group® brand names. The torch handles are used in welding. They are gold in color and made out of brass. Welding torch model numbers include 18-5 and 85. Manufacture date codes include FM, GA, GB and GC. The model number and date code are stamped on the torch handle at the end closest to the flame. The torch handles were sold individually and also as part of the following kits. Units with "0" above the word "Harris" and to the right of the rivet head are not included in this recall. Kit Model Number Description 1400299 WELD-HDL,63EWAC-CV A-245-100 1401340 WELD-HDL,85 with C/V 1401346 WELD-HDL,85 LECO 1401347 WELD-HDL,64003055 85 RAD 1401820 WELD-HDL,18-5 4400250 KIT,8525 C DLX RAD 4400259 KIT,8525 CD DLX RAD 4400263 KIT,8525C DLX BRZ OXARC 4403181 KIT,85601-200 DLX P.A.T. RAD 4403184 KIT,8525F-510P DLX LPG RAD 4403208 KIT,MED DUTY WELD WE250A 4403209 KIT,STANDARD DUTY WE200A 4403211 KIT,85601-200 INDUSTRIAL P.A.T.DLX 4403212 KIT,85601-510 DLX CUTWELDER BAG 4403213 KIT,85601-200 PAT STD 4403224 KIT,8525GX-510 DLX STEELWORKER BAG 4403225 KIT,8525GX-300 DLX STEELWORKER BAG 4403226 KIT,8525GX-510 STD STEELWORKER BAG 4403228 KIT,85601-510 DLX EXPERT CLASSIC BAG 4403229 KIT,85601-300 DLX EXPERT CLASSIC BAG 4403239 KIT,85601-300 DLX EXPERT CLASSIC BAG 4403239 KIT,8525FGX-510P LPGw/NX BAG 4403243 KIT,85601-510 STD EXPERT CLASSIC BAG 4403244 KIT,85601-300 STD EXPERT CLASSIC BAG 9101228 VALVE-ASY,VA85 9101230 VALVE-ASY,VA63 KH776 KIT,85601-200 PAT KH777 KIT,85601-510 DLX CUTWELDER BAG KH784 KIT,8525F-510P PROPANE/LPG BAG. Units affected: About 13,000 in the U.S. and 350 in Canada.
Why was this product recalled?
The torch handles can leak oxygen or fuel, posing a fire hazard.
What should consumers do?
Consumers should immediately stop using the recalled torch handles and contact Harris Products Group to receive a free replacement.
Which agency issued this recall?
This recall was issued by the CPSC on July 31, 2014. Severity: Moderate. Recall number: 14243.
How do I check if my product is affected by a recall?
Check the product description and recall number (14243) against your product. Visit the official CPSC website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product?
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.

Recall Context

Product recalls are issued when a manufacturer, distributor, or federal agency determines that a product poses a safety risk to consumers. This recall is classified as moderate severity, indicating the product may cause temporary or medically reversible health consequences. Across PlainRecalls, we track 83,000+ recalls from FDA, CPSC, and NHTSA to help consumers stay informed and act quickly when safety issues arise.

Nearby Recalls in This Category

Other recalls in the same product category — useful for spotting patterns across the same defect class or manufacturer.

Compare this recall with Electrolux Group Recalls Frigidaire Gas Ranges Due to Burn … →

Data Sources

Data as of 2025. Source: FDA, CPSC, NHTSA, USDA FSIS federal recall databases.

  • Source: FDA — Food and Drug Administration, openFDA Enforcement API (food, drug, and medical device recalls)
  • Source: CPSC — Consumer Product Safety Commission Recalls API (consumer product recalls and hazards)
  • Source: NHTSA — National Highway Traffic Safety Administration Recalls API (vehicle safety recalls)
  • Source: USDA FSIS — Food Safety and Inspection Service (meat, poultry, and egg product recalls)

Recall information is sourced from official federal agency databases. Always verify recall details with the issuing agency for the most current status. This information is for research and awareness purposes only.

All federal data sources used on this page

Source: Federal recall agencies (FDA, CPSC, NHTSA, USDA FSIS) Aggregated multi-agency recall feeds · 2024 Recall data normalized across federal agency feeds; severity classifications follow each agency's own taxonomy (FDA Class I/II/III; CPSC, NHTSA, USDA FSIS).