Severity
Moderate
CPSC recall · Reported November 25, 2014
The latch pin can disengage from the latch and allow the door to open while the vehicle is moving, posing a risk of ejection of an unrestrained rider and impact or laceration haza…
Lsi Products Inc. dba Pro Armor, Riverside, Calif. recalled This recall involves Pro Armor doors sold as accessories for model year 2010 through 2014… - a moderate-severity action.
Pro Armor Recalls Doors for Polaris RZR 800 and 900 Utility Vehicles Due to Impact, Lacer… was recalled by Lsi Products Inc. dba Pro Armor, Riverside, Calif. in November 25, 2014. Reason: The latch pin can disengage from the latch and allow the door to open while the vehicle is moving, posing a r…. Remedy: Consumers should immediately stop using vehicles with these doors and contact Pro Armor f…. Verify recall #15037 with the CPSC before acting.
The recall
Lsi Products Inc. dba Pro Armor, Riverside, Calif. issued this moderate-severity CPSC recall-The latch pin can disengage from the latch and allow the door to open while the vehicle is moving, posing a r….
Sourced from official CPSC enforcement records. Verify recall #15037 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.
This CPSC action (record #15037) was formally reported on November 25, 2014. It is classified under Moderate severity, with a current status of Active. Lsi Products Inc. dba Pro Armor, Riverside, Calif. is listed as the recalling firm. Federal records list the affected scope as About 300.
The documented reason for this recall is: The latch pin can disengage from the latch and allow the door to open while the vehicle is moving, posing a risk of ejection of an unrestrained rider and impact or laceration hazards. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Consumers should immediately stop using vehicles with these doors and contact Pro Armor for a free repair kit. - consumers holding this product should act on that instruction rather than relying on general guidance.
Within the same product category the archive holds 6 closely related recalls, 6 from CPSC - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.
Where this recall sits in its category - 7,642 vehicles recalls on record
Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.
Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.
Severity
Moderate
Affected scope
About 300
Related Recalls
6
6 from same agency
This recall involves Pro Armor doors sold as accessories for model year 2010 through 2014 Polaris RZR 800 and RZR 900 models. The doors have a black powder coated finish and have four major components: a large square sheet metal panel, a smaller triangular sheet metal panel, a tubular metal frame and a latch. The panels are interchangeable and come in two styles. One style has cutout vents along the top and the other style has none. The smaller panel has a white Pro Armor logo below the cutouts. The door frame has the logo and "Pro Armor" on the top tube. The latch is silver with a black locking mechanism that attaches to the vehicle frame and a handle that attaches to the door.
The latch pin can disengage from the latch and allow the door to open while the vehicle is moving, posing a risk of ejection of an unrestrained rider and impact or laceration hazards.
Consumers should immediately stop using vehicles with these doors and contact Pro Armor for a free repair kit.
| Attribute | Value |
|---|---|
| Agency | U.S. Consumer Product Safety Commission |
| Severity class | Moderate |
| Status | Active |
| Recall number | 15037 |
| Date reported | November 25, 2014 |
| Date initiated | November 25, 2014 |
| Recalling firm | Lsi Products Inc. dba Pro Armor, Riverside, Calif. |
| Affected scope | About 300 |
| Distribution | Not disclosed |
| Official source | CPSC notice → |
Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.
What to do with this recall
Consumers should immediately stop using vehicles with these doors and contact Pro Armor for a free repair kit.
This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.
Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.
Yongkang Ruihe Metal Products Co. Ltd., of China · 2026-06-25
· 2026-06-18
CooCooBaby, of China · 2026-06-18
Kawasaki Motors Manufacturing Corp., U.S.A., of Lincoln, Nebraska · 2026-06-11
· 2026-06-11
Compare this recall with Yamazuki Recalls Youth All-Terrain Vehicles (ATVs) Due to R… →
Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: CPSC, reported November 25, 2014. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.